diff --git a/share/man/man4/uchcom.4 b/share/man/man4/uchcom.4
--- a/share/man/man4/uchcom.4
+++ b/share/man/man4/uchcom.4
@@ -1,3 +1,6 @@
+.\"
+.\" SPDX-License-Identifier: BSD-2-Clause
+.\"
 .\" $NetBSD: uchcom.4,v 1.2 2008/04/30 13:10:54 martin Exp $
 .\"
 .\" Copyright (c) 2007 The NetBSD Foundation, Inc.
@@ -27,37 +30,75 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd August 19, 2024
+.Dd June 25, 2025
 .Dt UCHCOM 4
 .Os
 .Sh NAME
 .Nm uchcom
-.Nd WinChipHead CH9102/CH343/CH341/CH340 serial adapter driver
+.Nd WinChipHead CH9102/CH343/CH341/CH340 USB to serial UART driver
 .Sh SYNOPSIS
-To compile this driver into the kernel,
-place the following lines in your
-kernel configuration file:
-.Bd -ragged -offset indent
 .Cd "device usb"
 .Cd "device ucom"
 .Cd "device uchcom"
-.Ed
 .Pp
-Alternatively, to load the driver as a
-module at boot time, place the following line in
-.Xr loader.conf 5 :
-.Bd -literal -offset indent
-uchcom_load="YES"
-.Ed
+In
+.Xr rc.conf 5 :
+.Cd kld_list="uchcom"
+.Pp
+In
+.Xr sysctl.conf 5 :
+.Cd hw.usb.uchcom.debug=1
 .Sh DESCRIPTION
 The
 .Nm
-driver provides support for the WinChipHead CH9102/CH343/CH341/CH340
-USB-to-RS-232 Bridge chip.
+driver provides support for the WinChipHead USB to serial UART adapters.
+If the appropriate hardware is detected,
+the driver will be loaded automatically by
+.Xr devmatch 8 .
+To load the driver manually, add it to the
+.Ic kld_list
+in
+.Xr rc.conf 5 ,
+or use
+.Xr kldload 8
+at runtime.
+The device is accessed through the
+.Xr ucom 4
+driver, which makes it behave like a
+.Xr tty 4 .
+.Pp
+Call out through this interface with applications like
+.Xr cu 1
+or
+.Xr tip 1 .
+.Sh HARDWARE
+The
+.Nm
+driver supports the following USB to serial UART controllers:
 .Pp
-The datasheets for the CH340/CH341 list the maximum
-supported baud rate as 2,000,000.
-CH9102/CH343 devices support any baud rate up to 6 Mbps.
+.Bl -bullet -compact
+.It
+WinChipHead CH9102 (max 6Mbps)
+.It
+WinChipHead CH343 (max 6Mbps)
+.It
+WinChipHead CH341 (max 2Mbps)
+.It
+WinChipHead CH340 (max 2Mbps)
+.El
+.Sh SYSCTL VARIABLES
+These settings can be entered in the
+.Xr loader 8
+prompt, set in
+.Xr loader.conf 5 ,
+.Xr sysctl.conf 5 ,
+or changed at runtime with
+.Xr sysctl 8 :
+.Bl -tag -width "hw.usb.uchcom.debug"
+.It Va hw.usb.uchcom.debug
+Enable debugging messages, default
+.Ql 0
+.El
 .Sh FILES
 .Bl -tag -width "/dev/ttyU*.init" -compact
 .It Pa /dev/ttyU*
@@ -73,15 +114,14 @@
 corresponding callout initial-state and lock-state devices
 .El
 .Sh SEE ALSO
+.Xr cu 1 ,
 .Xr tty 4 ,
 .Xr ucom 4 ,
 .Xr usb 4
 .Sh HISTORY
 The
 .Nm
-driver first appeared in
-.Nx .
-The first
-.Fx
-release to include it was
-.Fx 8.0 .
+driver appeared in
+.Fx 8.0
+from
+.Nx 5.0 .