diff --git a/share/examples/Makefile b/share/examples/Makefile --- a/share/examples/Makefile +++ b/share/examples/Makefile @@ -320,9 +320,8 @@ SE_DIRS+= sound/oss SE_SOUND_OSS= \ README \ - basic.c \ - midi.c \ - ossinit.h + audio.c \ + midi.c SE_DIRS+= sunrpc SE_SUNRPC= Makefile diff --git a/share/examples/sound/oss/audio.c b/share/examples/sound/oss/audio.c new file mode 100644 --- /dev/null +++ b/share/examples/sound/oss/audio.c @@ -0,0 +1,310 @@ +/* + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2021 Goran Mekić + * Copyright (c) 2024 The FreeBSD Foundation + * + * Portions of this software were developed by Christos Margiolis + * under sponsorship from the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#ifndef SAMPLE_SIZE +#define SAMPLE_SIZE 16 +#endif + +/* Format can be unsigned, in which case replace S with U */ +#if SAMPLE_SIZE == 32 +typedef int32_t sample_t; +int format = AFMT_S32_NE; /* Signed 32bit native endian format */ +#elif SAMPLE_SIZE == 16 +typedef int16_t sample_t; +int format = AFMT_S16_NE; /* Signed 16bit native endian format */ +#elif SAMPLE_SIZE == 8 +typedef int8_t sample_t; +int format = AFMT_S8_NE; /* Signed 8bit native endian format */ +#else +#error Unsupported sample format! +typedef int32_t sample_t; +int format = AFMT_S32_NE; /* Not a real value, just silencing + * compiler errors */ +#endif + +/* + * Minimal configuration for OSS + * For real world applications, this structure will probably contain many + * more fields + */ +typedef struct config { + char *device; + int channels; + int fd; + int format; + int frag; + int sample_count; + int sample_rate; + int sample_size; + int chsamples; + int mmap; + oss_audioinfo audio_info; + audio_buf_info buffer_info; +} config_t; + +/* + * Error state is indicated by value=-1 in which case application exits with + * error + */ +static inline void +check_error(const int value, const char *message) +{ + if (value == -1) + err(1, "OSS error: %s\n", message); +} + + +/* Calculate frag by giving it minimal size of buffer */ +static inline int +size2frag(int x) +{ + int frag = 0; + + while ((1 << frag) < x) + ++frag; + + return (frag); +} + +/* + * Split input buffer into channels. Input buffer is in interleaved format + * which means if we have 2 channels (L and R), this is what the buffer of 8 + * samples would contain: L,R,L,R,L,R,L,R. The result are two channels + * containing: L,L,L,L and R,R,R,R. + */ +static void +oss_split(config_t *config, sample_t *input, sample_t *output) +{ + int channel, index, i; + + for (i = 0; i < config->sample_count; ++i) { + channel = i % config->channels; + index = i / config->channels; + output[channel * index] = input[i]; + } +} + +/* + * Convert channels into interleaved format and place it in output + * buffer + */ +static void +oss_merge(config_t *config, sample_t *input, sample_t *output) +{ + int channel, index; + + for (channel = 0; channel < config->channels; ++channel) { + for (index = 0; index < config->chsamples; ++index) { + output[index * config->channels + channel] = + input[channel * index]; + } + } +} + +static void +oss_init(config_t *config) +{ + int error, tmp, min_frag; + + /* Open the device for read and write */ + config->fd = open(config->device, O_RDWR); + check_error(config->fd, "open"); + + /* Get device information */ + config->audio_info.dev = -1; + error = ioctl(config->fd, SNDCTL_ENGINEINFO, &(config->audio_info)); + check_error(error, "SNDCTL_ENGINEINFO"); + printf("min_channels: %d\n", config->audio_info.min_channels); + printf("max_channels: %d\n", config->audio_info.max_channels); + printf("latency: %d\n", config->audio_info.latency); + printf("handle: %s\n", config->audio_info.handle); + if (config->audio_info.min_rate > config->sample_rate || + config->sample_rate > config->audio_info.max_rate) { + errx(1, "%s doesn't support chosen samplerate of %dHz!\n", + config->device, config->sample_rate); + } + if (config->channels < 1) + config->channels = config->audio_info.max_channels; + + /* + * If device is going to be used in mmap mode, disable all format + * conversions. Official OSS documentation states error code should not + * be checked. + * http://manuals.opensound.com/developer/mmap_test.c.html#LOC10 + */ + if (config->mmap) { + tmp = 0; + ioctl(config->fd, SNDCTL_DSP_COOKEDMODE, &tmp); + } + + /* + * Set number of channels. If number of channels is chosen to the value + * near the one wanted, save it in config + */ + tmp = config->channels; + error = ioctl(config->fd, SNDCTL_DSP_CHANNELS, &tmp); + check_error(error, "SNDCTL_DSP_CHANNELS"); + /* Or check if tmp is close enough? */ + if (tmp != config->channels) { + errx(1, "%s doesn't support chosen channel count of %d set " + "to %d!\n", config->device, config->channels, tmp); + } + config->channels = tmp; + + /* Set format, or bit size: 8, 16, 24 or 32 bit sample */ + tmp = config->format; + error = ioctl(config->fd, SNDCTL_DSP_SETFMT, &tmp); + check_error(error, "SNDCTL_DSP_SETFMT"); + if (tmp != config->format) { + errx(1, "%s doesn't support chosen sample format!\n", + config->device); + } + + /* Most common values for samplerate (in kHz): 44.1, 48, 88.2, 96 */ + tmp = config->sample_rate; + error = ioctl(config->fd, SNDCTL_DSP_SPEED, &tmp); + check_error(error, "SNDCTL_DSP_SPEED"); + + /* Get and check device capabilities */ + error = ioctl(config->fd, SNDCTL_DSP_GETCAPS, &(config->audio_info.caps)); + check_error(error, "SNDCTL_DSP_GETCAPS"); + if (!(config->audio_info.caps & PCM_CAP_DUPLEX)) + errx(1, "Device doesn't support full duplex!\n"); + + if (config->mmap) { + if (!(config->audio_info.caps & PCM_CAP_TRIGGER)) + errx(1, "Device doesn't support triggering!\n"); + if (!(config->audio_info.caps & PCM_CAP_MMAP)) + errx(1, "Device doesn't support mmap mode!\n"); + } + + /* + * If desired frag is smaller than minimum, based on number of channels + * and format (size in bits: 8, 16, 24, 32), set that as frag. Buffer + * size is 2^frag, but the real size of the buffer will be read when + * the configuration of the device is successful + */ + min_frag = size2frag(config->sample_size * config->channels); + + if (config->frag < min_frag) + config->frag = min_frag; + + /* + * Allocate buffer in fragments. Total buffer will be split in number + * of fragments (2 by default) + */ + if (config->buffer_info.fragments < 0) + config->buffer_info.fragments = 2; + tmp = ((config->buffer_info.fragments) << 16) | config->frag; + error = ioctl(config->fd, SNDCTL_DSP_SETFRAGMENT, &tmp); + check_error(error, "SNDCTL_DSP_SETFRAGMENT"); + + /* When all is set and ready to go, get the size of buffer */ + error = ioctl(config->fd, SNDCTL_DSP_GETOSPACE, &(config->buffer_info)); + check_error(error, "SNDCTL_DSP_GETOSPACE"); + if (config->buffer_info.bytes < 1) { + errx(1, "OSS buffer error: buffer size can not be %d\n", + config->buffer_info.bytes); + } + config->sample_count = config->buffer_info.bytes / config->sample_size; + config->chsamples = config->sample_count / config->channels; +} + +int +main(int argc, char *argv[]) +{ + int ret, bytes; + int8_t *ibuf, *obuf; + config_t config = { + .device = "/dev/dsp", + .channels = -1, + .format = format, + .frag = -1, + .sample_rate = 48000, + .sample_size = sizeof(sample_t), + .buffer_info.fragments = -1, + .mmap = 0, + }; + + /* Initialize device */ + oss_init(&config); + + /* + * Allocate input and output buffers so that their size match frag_size + */ + bytes = config.buffer_info.bytes; + ibuf = malloc(bytes); + obuf = malloc(bytes); + sample_t *channels = malloc(bytes); + + printf("bytes: %d, fragments: %d, fragsize: %d, fragstotal: %d, " + "samples: %d\n", + bytes, config.buffer_info.fragments, + config.buffer_info.fragsize, config.buffer_info.fragstotal, + config.sample_count); + + /* Minimal engine: read input and copy it to the output */ + for (;;) { + ret = read(config.fd, ibuf, bytes); + if (ret < bytes) { + fprintf(stderr, "Requested %d bytes, but read %d!\n", + bytes, ret); + break; + } + oss_split(&config, (sample_t *)ibuf, channels); + /* All processing will happen here */ + oss_merge(&config, channels, (sample_t *)obuf); + ret = write(config.fd, obuf, bytes); + if (ret < bytes) { + fprintf(stderr, "Requested %d bytes, but wrote %d!\n", + bytes, ret); + break; + } + } + + /* Cleanup */ + free(channels); + free(obuf); + free(ibuf); + close(config.fd); + + return (0); +} diff --git a/share/examples/sound/oss/basic.c b/share/examples/sound/oss/basic.c deleted file mode 100644 --- a/share/examples/sound/oss/basic.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * SPDX-License-Identifier: BSD-2-Clause - * - * Copyright (c) 2021 Goran Mekić - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "ossinit.h" - -int -main() -{ - config_t config = { - .device = "/dev/dsp", - .channels = -1, - .format = format, - .frag = -1, - .sample_rate = 48000, - .sample_size = sizeof(sample_t), - .buffer_info.fragments = -1, - .mmap = 0, - }; - - /* Initialize device */ - oss_init(&config); - - /* - * Allocate input and output buffers so that their size match - * frag_size - */ - int ret; - int bytes = config.buffer_info.bytes; - int8_t *ibuf = malloc(bytes); - int8_t *obuf = malloc(bytes); - sample_t *channels = malloc(bytes); - - printf( - "bytes: %d, fragments: %d, fragsize: %d, fragstotal: %d, samples: %d\n", - bytes, - config.buffer_info.fragments, - config.buffer_info.fragsize, - config.buffer_info.fragstotal, - config.sample_count - ); - - /* Minimal engine: read input and copy it to the output */ - for (;;) { - ret = read(config.fd, ibuf, bytes); - if (ret < bytes) { - fprintf( - stderr, - "Requested %d bytes, but read %d!\n", - bytes, - ret - ); - break; - } - oss_split(&config, (sample_t *)ibuf, channels); - /* All processing will happen here */ - oss_merge(&config, channels, (sample_t *)obuf); - ret = write(config.fd, obuf, bytes); - if (ret < bytes) { - fprintf( - stderr, - "Requested %d bytes, but wrote %d!\n", - bytes, - ret - ); - break; - } - } - - /* Cleanup */ - free(channels); - free(obuf); - free(ibuf); - close(config.fd); - return (0); -}