diff --git a/sys/arm/conf/RPI-B b/sys/arm/conf/RPI-B deleted file mode 100644 --- a/sys/arm/conf/RPI-B +++ /dev/null @@ -1,108 +0,0 @@ -# -# RPI-B -- Custom configuration for the Raspberry Pi -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# - -ident RPI-B - -include "std.armv6" -include "../broadcom/bcm2835/std.rpi" -include "../broadcom/bcm2835/std.bcm2835" - -options SCHED_4BSD # 4BSD scheduler -options PLATFORM - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ue0 - -#options ROOTDEVNAME=\"ufs:mmcsd0s2\" - -# pseudo devices -device clk -device phy -device hwreset -device nvmem -device regulator -device syscon - -device bpf -device loop -device ether -device uart -device pty -device snp -device pl011 - -# Device mode support -device usb_template # Control of the gadget - -# Comment following lines for boot console on serial port -device vt -device kbdmux -device ukbd - -device sdhci -device mmc -device mmcsd - -device gpio -device gpioled - -# I2C -device iic -device iicbus -device bcm2835_bsc - -device md - -# USB support -device usb -device dwcotg # DWC OTG controller - -# USB storage support -device scbus -device da -device umass - -# USB ethernet support -device smscphy -device mii -device smsc - -# SPI -device spibus -device bcm2835_spi - -device vchiq -device sound - -device fdt_pinctrl - -# HID support -device hid # Generic HID support - -# Flattened Device Tree -options FDT # Configure using FDT/DTB data -# Note: DTB is normally loaded and modified by RPi boot loader, then -# handed to kernel via U-Boot and ubldr. -#options FDT_DTB_STATIC -#makeoptions FDT_DTS_FILE=rpi.dts -makeoptions MODULES_EXTRA="dtb/rpi rpi_ft5406" diff --git a/sys/arm/conf/std.armv6 b/sys/arm/conf/std.armv6 deleted file mode 100644 --- a/sys/arm/conf/std.armv6 +++ /dev/null @@ -1,81 +0,0 @@ -# Standard kernel config items for all ARMv6 systems. -# - -options HZ=1000 -options PREEMPTION # Enable kernel thread preemption -options VIMAGE # Subsystem virtualization, e.g. VNET -options INET # InterNETworking -options INET6 # IPv6 communications protocols -options CC_CUBIC # include CUBIC congestion control -options TCP_HHOOK # hhook(9) framework for TCP -device crypto # core crypto support -options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 -options NETLINK # netlink(4) support -options SCTP_SUPPORT # Allow kldload of SCTP -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -options UFS_ACL # Support for access control lists -options UFS_DIRHASH # Improve performance on big directories -options UFS_GJOURNAL # Enable gjournal-based UFS journaling -options QUOTA # Enable disk quotas for UFS -options NFSCL # Network Filesystem Client -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options MSDOSFS # MSDOS Filesystem -options CD9660 # ISO 9660 Filesystem -options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options TMPFS # Efficient memory filesystem -options GEOM_PART_GPT # GUID Partition Tables -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options GEOM_LABEL # Provides labelization -options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] -options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE # ktrace(1) support -options STACK # stack(9) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions -options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. -options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) -options CAPABILITY_MODE # Capsicum capability mode -options CAPABILITIES # Capsicum capabilites -options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) -options VFP # Enable floating point hardware support -options MAC # Support for Mandatory Access Control (MAC) - -options COMPAT_FREEBSD10 # Compatible with FreeBSD10 -options COMPAT_FREEBSD11 # Compatible with FreeBSD11 -options COMPAT_FREEBSD12 # Compatible with FreeBSD12 -options COMPAT_FREEBSD13 # Compatible with FreeBSD13 -options COMPAT_FREEBSD14 # Compatible with FreeBSD14 - -# DTrace support -options KDTRACE_HOOKS # Kernel DTrace hooks -options DDB_CTF # all architectures - kernel ELF linker loads CTF data -makeoptions WITH_CTF=1 - -# Debugging support. Always need this: -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options KDB # Enable kernel debugger support. -options KDB_TRACE # Print a stack trace for a panic. - -options USB_DEBUG # Enable usb debug support code - -# For full debugger support use (turn off in stable branch): -include "std.debug" - -# Optional extras, never enabled by default: -#options BOOTVERBOSE -#options DEBUG # May result in extreme spewage -#options KTR -#options KTR_COMPILE=KTR_ALL -#options KTR_ENTRIES=16384 -#options KTR_MASK=(KTR_SPARE2) -#options KTR_VERBOSE=0 -#options USB_REQ_DEBUG -#options USB_VERBOSE -