diff --git a/sys/arm/conf/NOTES b/sys/arm/conf/NOTES --- a/sys/arm/conf/NOTES +++ b/sys/arm/conf/NOTES @@ -79,6 +79,7 @@ nooptions IPOIB nooptions IPOIB_CM +nodevice iser nodevice sym nodevice ccr diff --git a/sys/conf/NOTES b/sys/conf/NOTES --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1461,6 +1461,19 @@ # a topology with the SES device that's on the box these drives are in.... options SES_ENABLE_PASSTHROUGH +# iSCSI +# +# iSCSI permits access to SCSI peripherals over a network connection +# (e.g. via a TCP/IP socket) + +device cfiscsi # CAM Target Layer iSCSI target frontend +device iscsi # iSCSI initiator +device iser # iSCSI Extensions for RDMA (iSER) initiator + +# Options used in dev/iscsi (Software iSCSI stack) +# +options ISCSI_INITIATOR_DEBUG=9 + ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS @@ -1620,10 +1633,6 @@ # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE -# Options used in dev/iscsi (Software iSCSI stack) -# -options ISCSI_INITIATOR_DEBUG=9 - # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation