diff --git a/sys/arm/conf/EFIKA_MX b/sys/arm/conf/EFIKA_MX deleted file mode 100644 --- a/sys/arm/conf/EFIKA_MX +++ /dev/null @@ -1,145 +0,0 @@ -# -# Kernel configuration for Efika MX Smarttop/Smartbook boards -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident EFIKA_MX - -include "std.armv7" -include "../freescale/imx/std.imx51" - -makeoptions WITHOUT_MODULES="ahc" - -options SOC_IMX51 - -options SCHED_4BSD # 4BSD scheduler -#options MD_ROOT # MD is a potential root device -#options NFSD # Network Filesystem Server -options PLATFORM -options INCLUDE_CONFIG_FILE # Include this file in kernel - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ue0 - -options ROOTDEVNAME=\"ufs:ada0s2a\" - - -# kernel/memory size reduction -#options MUTEX_NOINLINE -#options NO_FFS_SNAPSHOT -#options NO_SWAPPING -#options NO_SYSCTL_DESCR -#options RWLOCK_NOINLINE - -# pseudo devices -device clk -device phy -device hwreset -device nvmem -device regulator -device syscon - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Pseudo devices. -device loop # Network loopback -device ether # Ethernet support -#device vlan # 802.1Q VLAN support -#device tuntap # Packet tunnel. -#device md # Memory "disks" -#device gif # IPv6 and IPv4 tunneling -#device firmware # firmware assist module - -# Serial (COM) ports -device uart # Multi-uart driver - -device ata -device atapci # Only for helper functions -device imxata - -device gpio -device gpioled - -device fsliic -device iic -device iicbus - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# USB support -options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. -device ehci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da -device uhid # "Human Interface Devices" -device u3g - -# USB Ethernet, requires miibus -device miibus -device aue # ADMtek USB Ethernet -device axe # ASIX Electronics USB Ethernet -device cdce # Generic USB over Ethernet -device cue # CATC USB Ethernet -device kue # Kawasaki LSI USB Ethernet -device rue # RealTek RTL8150 USB Ethernet -device udav # Davicom DM9601E USB - -# USB Wireless -device rum # Ralink Technology RT2501USB wireless NICs - -# Watchdog timer. -# WARNING: can't be disabled!!! -device imxwdt # Watchdog - -# Wireless NIC cards -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_amrr # AMRR transmit rate control algorithm - -# HID support -device hid # Generic HID support - -# Flattened Device Tree -options FDT # Configure using FDT/DTB data -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=efikamx.dts -device fdt_pinctrl # FDT pinmux driver - -# NOTE: serial console will be disabled if syscons enabled -# Uncomment following lines for framebuffer/syscons support -device sc -device kbdmux -options SC_DFLT_FONT # compile font in -makeoptions SC_DFLT_FONT=cp437 -device ukbd # Allow keyboard like HIDs to control console -device ums diff --git a/sys/arm/conf/IMX53 b/sys/arm/conf/IMX53 deleted file mode 100644 --- a/sys/arm/conf/IMX53 +++ /dev/null @@ -1,131 +0,0 @@ -# -# Kernel configuration for i.MX53 boards -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -ident IMX53 - -include "std.armv7" -include "../freescale/imx/std.imx53" - -options SOC_IMX53 - -options SCHED_4BSD # 4BSD scheduler -#options NFSD # Network Filesystem Server -options PLATFORM -options INCLUDE_CONFIG_FILE # Include this file in kernel - -# kernel/memory size reduction -#options MUTEX_NOINLINE -#options NO_FFS_SNAPSHOT -#options NO_SWAPPING -#options NO_SYSCTL_DESCR -#options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# pseudo devices -device clk -device phy -device hwreset -device nvmem -device regulator -device syscon - -# Pseudo devices. -device loop # Network loopback -device ether # Ethernet support -#device vlan # 802.1Q VLAN support -#device tuntap # Packet tunnel. -device md # Memory "disks" -#device gif # IPv6 and IPv4 tunneling -#device firmware # firmware assist module - -# Ethernet -device ffec # Freescale Fast Ethernet Controller -device miibus # Standard mii bus - -# Serial (COM) ports -device uart # Multi-uart driver - -device ata -device atapci # Only for helper functions -device imxata - -device gpio -device gpioled - -device fsliic -device iic -device iicbus - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# USB support -options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. -device ehci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da -device uhid # "Human Interface Devices" -#device ukbd # Allow keyboard like HIDs to control console -device ums - -# USB Ethernet, requires miibus -#device miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -#device udav # Davicom DM9601E USB - -# USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs - -# Watchdog timer. -# WARNING: can't be disabled!!! -device imxwdt # Watchdog - -# Wireless NIC cards -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_amrr # AMRR transmit rate control algorithm - -# MMC -#device sdhci # SD controller -#device mmc # SD/MMC protocol -#device mmcsd # SDCard disk device - -# HID support -device hid # Generic HID support - - -# Flattened Device Tree -options FDT # Configure using FDT/DTB data -makeoptions MODULES_EXTRA="dtb/imx5 imx" -device fdt_pinctrl # FDT pinmux driver