Index: head/sys/mips/conf/ERL =================================================================== --- head/sys/mips/conf/ERL +++ head/sys/mips/conf/ERL @@ -0,0 +1,212 @@ +# +# ERL - EdgeRouter Lite kernel config +# Based on configuration from http://rtfm.net/FreeBSD/ERL +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +ident ERL + +makeoptions ARCH_FLAGS="-march=octeon -mabi=64" +makeoptions LDSCRIPT_NAME=ldscript.mips.octeon1 + +# Don't build any modules yet. +makeoptions MODULES_OVERRIDE="" +makeoptions KERNLOADADDR=0xffffffff80100000 + +# We don't need to build a trampolined version of the kernel. +makeoptions WITHOUT_KERNEL_TRAMPOLINE=1 + +include "../cavium/std.octeon1" + +hints "OCTEON1.hints" #Default places to look for devices. + +makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols + +# Board-specific support that cannot be auto-detected at runtime. +#options OCTEON_VENDOR_LANNER # Support for Lanner boards. +#options OCTEON_VENDOR_RADISYS # Support for Radisys boards. +options OCTEON_VENDOR_UBIQUITI # Support for Ubiquiti boards. +#options OCTEON_VENDOR_GEFES # Support for GE LANIC boards +#options OCTEON_BOARD_CAPK_0100ND # Support for CAPK-0100nd. + +# Compile for a specified Octeon model. If not specified, support for +# detection at runtime will be used instead, which may give inferior +# performance. +# +# See sys/contrib/octeon-sdk/octeon-model.h for possible values. +options OCTEON_MODEL=OCTEON_CN50XX_PASS1 + +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options MD_ROOT # MD is a potential root device +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options COMPAT_FREEBSD32 # Compatible with o32 binaries +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. +options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) +options AUDIT # Security event auditing +options MAC # TrustedBSD MAC Framework +#options KDTRACE_FRAME # Ensure frames are compiled in +#options KDTRACE_HOOKS # Kernel DTrace hooks +options INCLUDE_CONFIG_FILE # Include this file in kernel +options NO_SWAPPING # Disable support for paging +options TMPFS # Temporary file system + +# Debugging for use in -current +#options KDB # Enable kernel debugger support. +#options DDB # Support DDB. +#options GDB # Support remote GDB. +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones + +# Make an SMP-capable kernel by default +options SMP # Symmetric MultiProcessor Kernel + +options ROOTDEVNAME=\"ufs:da0s2a\" # Default root filesystem. + +# ATA/SCSI peripherals +device scbus # SCSI bus (required for ATA/SCSI) +device ch # SCSI media changers +device da # Direct Access (disks) +device sa # Sequential Access (tape etc) +device cd # CD +device pass # Passthrough device (direct ATA/SCSI access) +device ses # Enclosure Services (SES and SAF-TE) + +# Serial (COM) ports +device uart # Generic UART driver + +# On-board Cavium Octeon Ethernet. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device octe + +# Cavium Octeon management Ethernet. +device octm + +# Switch PHY support for the octe driver. These currently present a VLAN per +# physical port, but may eventually provide support for DSA or similar instead. +#device mv88e61xxphy # Marvell 88E61XX + +# Wireless NIC cards +device wlan # 802.11 support +options IEEE80211_DEBUG # enable debug msgs +options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's +options IEEE80211_SUPPORT_MESH # enable 802.11s draft support +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_amrr # AMRR transmit rate control algorithm +#device ath # Atheros NIC's +#device ath_pci # Atheros pci/cardbus glue +#device ath_hal # pci/cardbus chip support +#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors +#device ath_rate_sample # SampleRate tx rate control for ath + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +device vlan # 802.1Q VLAN support +device tun # Packet tunnel. +device md # Memory "disks" +device gif # IPv6 and IPv4 tunneling +device firmware # firmware assist module + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# Hardware watchdog support. +#device octeon_wdog # Octeon hardware watchdog + +# USB support +options USB_DEBUG # enable debug msgs +device octusb # Cavium Octeon on-board USB interface (USB 2.0) +device uhci # UHCI PCI->USB interface +device ohci # OHCI PCI->USB interface +device ehci # EHCI PCI->USB interface (USB 2.0) +device usb # USB Bus (required) +#device udbp # USB Double Bulk Pipe devices +device uhid # "Human Interface Devices" +device ulpt # Printer +device umass # Disks/Mass storage - Requires scbus and da +device ums # Mouse +device urio # Diamond Rio 500 MP3 player +# USB Serial devices +device u3g # USB-based 3G modems (Option, Huawei, Sierra) +device uark # Technologies ARK3116 based serial adapters +device ubsa # Belkin F5U103 and compatible serial adapters +device uftdi # For FTDI usb serial adapters +device uipaq # Some WinCE based devices +device uplcom # Prolific PL-2303 serial adapters +device uslcom # SI Labs CP2101/CP2102 serial adapters +device uvisor # Visor and Palm devices +device uvscom # USB serial support for DDI pocket's PHS +# USB Ethernet, requires miibus +device miibus # MII bus support +device aue # ADMtek USB Ethernet +device axe # ASIX Electronics USB Ethernet +device cdce # Generic USB over Ethernet +device cue # CATC USB Ethernet +device kue # Kawasaki LSI USB Ethernet +device rue # RealTek RTL8150 USB Ethernet +device udav # Davicom DM9601E USB +# USB Wireless +device rum # Ralink Technology RT2501USB wireless NICs +device uath # Atheros AR5523 wireless NICs +device ural # Ralink Technology RT2500USB wireless NICs +device zyd # ZyDAS zd1211/zd1211b wireless NICs + +# crypto subsystem +device crypto # core crypto support +device cryptodev # /dev/crypto for access to h/w +device cryptocteon # Octeon coprocessor 2 crypto offload + +# GPIO support +#device gpio + +# PMC support +#device hwpmc