Index: head/bin/csh/config_p.h =================================================================== --- head/bin/csh/config_p.h +++ head/bin/csh/config_p.h @@ -9,7 +9,7 @@ #ifndef _h_config #define _h_config -/****************** System dependant compilation flags ****************/ +/****************** System dependent compilation flags ****************/ /* * POSIX This system supports IEEE Std 1003.1-1988 (POSIX). */ Index: head/sbin/devd/devd.cc =================================================================== --- head/sbin/devd/devd.cc +++ head/sbin/devd/devd.cc @@ -850,7 +850,7 @@ return (fd); } -unsigned int max_clients = 10; /* Default, can be overriden on cmdline. */ +unsigned int max_clients = 10; /* Default, can be overridden on cmdline. */ unsigned int num_clients; list clients; Index: head/sbin/fsck_ffs/fsck.h =================================================================== --- head/sbin/fsck_ffs/fsck.h +++ head/sbin/fsck_ffs/fsck.h @@ -301,7 +301,7 @@ extern char *cdevname; /* name of device being checked */ extern long dev_bsize; /* computed value of DEV_BSIZE */ extern long secsize; /* actual disk sector size */ -extern u_int real_dev_bsize; /* actual disk sector size, not overriden */ +extern u_int real_dev_bsize; /* actual disk sector size, not overridden */ extern char nflag; /* assume a no response */ extern char yflag; /* assume a yes response */ extern int bkgrdflag; /* use a snapshot to run on an active system */ Index: head/sbin/fsck_ffs/globs.c =================================================================== --- head/sbin/fsck_ffs/globs.c +++ head/sbin/fsck_ffs/globs.c @@ -73,7 +73,7 @@ char *cdevname; /* name of device being checked */ long dev_bsize; /* computed value of DEV_BSIZE */ long secsize; /* actual disk sector size */ -u_int real_dev_bsize; /* actual disk sector size, not overriden */ +u_int real_dev_bsize; /* actual disk sector size, not overridden */ char nflag; /* assume a no response */ char yflag; /* assume a yes response */ int bkgrdflag; /* use a snapshot to run on an active system */ Index: head/sbin/ipfw/tables.c =================================================================== --- head/sbin/ipfw/tables.c +++ head/sbin/ipfw/tables.c @@ -450,7 +450,7 @@ } } - /* Set some defaults to preserve compability */ + /* Set some defaults to preserve compatibility. */ if (xi.algoname[0] == '\0' && xi.type == 0) xi.type = IPFW_TABLE_ADDR; if (xi.vmask == 0) @@ -918,7 +918,7 @@ tentry_fill_key(oh, ptent, *av, add, &type, &vmask, &xi); /* - * compability layer: auto-create table if not exists + * Compatibility layer: auto-create table if not exists. */ if (xi.tablename[0] == '\0') { xi.type = type; @@ -1387,8 +1387,8 @@ vmask = xi->vmask; } else { /* - * we're running `ipfw -n` - * Compability layer: try to guess key type + * We're running `ipfw -n` + * Compatibility layer: try to guess key type * before failing. */ if (guess_key_type(key, &type) != 0) { @@ -1407,7 +1407,7 @@ oh->ntlv.name); /* * Table does not exist - * Compability layer: try to guess key type before failing. + * Compatibility layer: try to guess key type before failing. */ if (guess_key_type(key, &type) != 0) { /* Inknown key */ Index: head/sbin/natd/natd.c =================================================================== --- head/sbin/natd/natd.c +++ head/sbin/natd/natd.c @@ -223,7 +223,7 @@ /* * Create divert sockets. Use only one socket if -p was specified * on command line. Otherwise, create separate sockets for - * outgoing and incoming connnections. + * outgoing and incoming connections. */ if (mip->inOutPort) { Index: head/sbin/newfs_nandfs/newfs_nandfs.c =================================================================== --- head/sbin/newfs_nandfs/newfs_nandfs.c +++ head/sbin/newfs_nandfs/newfs_nandfs.c @@ -1088,7 +1088,7 @@ print_summary(void) { - printf("filesystem created succesfully\n"); + printf("filesystem was created successfully\n"); printf("total segments: %#jx valid segments: %#jx\n", nsegments, nsegments - bad_segments_count); printf("total space: %ju MB free: %ju MB\n", Index: head/sbin/rcorder/rcorder.c =================================================================== --- head/sbin/rcorder/rcorder.c +++ head/sbin/rcorder/rcorder.c @@ -220,7 +220,7 @@ /* * below are the functions that deal with creating the lists - * from the filename's given and the dependancies and provisions + * from the filename's given dependencies and provisions * in each of these files. no ordering or checking is done here. */ @@ -696,7 +696,7 @@ * * NOTE: do_file() is called recursively from several places and cannot * safely free() anything related to items that may be recursed on. - * Circular dependancies will cause problems if we do. + * Circular dependencies will cause problems if we do. */ static void do_file(filenode *fnode) Index: head/usr.bin/calendar/parsedata.c =================================================================== --- head/usr.bin/calendar/parsedata.c +++ head/usr.bin/calendar/parsedata.c @@ -274,7 +274,7 @@ /* If both the month and date are specified as numbers */ if (isonlydigits(p1, 1) && isonlydigits(p2, 0)) { - /* Now who wants to be this ambigious? :-( */ + /* Now who wants to be this ambiguous? :-( */ int m, d; if (strchr(p2, '*') != NULL) Index: head/usr.bin/colldef/parse.y =================================================================== --- head/usr.bin/colldef/parse.y +++ head/usr.bin/colldef/parse.y @@ -134,17 +134,17 @@ strcpy(__collate_version, COLLATE_VERSION1_2); if (fwrite(__collate_version, sizeof(__collate_version), 1, fp) != 1) err(EX_IOERR, - "IO error writting collate version to destination file %s", + "I/O error writing collate version to destination file %s", out_file); u32 = htonl(chain_index); if (fwrite(&u32, sizeof(u32), 1, fp) != 1) err(EX_IOERR, - "IO error writting chains number to destination file %s", + "I/O error writing chains number to destination file %s", out_file); if (fwrite(__collate_substitute_table, sizeof(__collate_substitute_table), 1, fp) != 1) err(EX_IOERR, - "IO error writting substitute table to destination file %s", + "I/O error writing substitution table to destination file %s", out_file); for (ch = 0; ch < UCHAR_MAX + 1; ch++) { __collate_char_pri_table[ch].prim = @@ -155,7 +155,7 @@ if (fwrite(__collate_char_pri_table, sizeof(__collate_char_pri_table), 1, fp) != 1) err(EX_IOERR, - "IO error writting char table to destination file %s", + "I/O error writing char table to destination file %s", out_file); for (ch = 0; ch < chain_index; ch++) { __collate_chain_pri_table[ch].prim = @@ -167,10 +167,10 @@ sizeof(*__collate_chain_pri_table), chain_index, fp) != (size_t)chain_index) err(EX_IOERR, - "IO error writting chain table to destination file %s", + "I/O error writing chain table to destination file %s", out_file); if (fclose(fp) != 0) - err(EX_IOERR, "IO error closing destination file %s", + err(EX_IOERR, "I/O error closing destination file %s", out_file); exit(EX_OK); } Index: head/usr.bin/dtc/dtb.hh =================================================================== --- head/usr.bin/dtc/dtb.hh +++ head/usr.bin/dtc/dtb.hh @@ -224,7 +224,7 @@ uint32_t bytes_written; /** - * Writes a C string directly to the ouput as-is. This is mainly used + * Writes a C string directly to the output as-is. This is mainly used * for writing directives. */ void write_string(const char *c); Index: head/usr.bin/indent/indent.1 =================================================================== --- head/usr.bin/indent/indent.1 +++ head/usr.bin/indent/indent.1 @@ -518,7 +518,7 @@ utility understands a substantial amount about the syntax of C, but it has a `forgiving' parser. It attempts to cope with the usual sorts of -incomplete and misformed syntax. +incomplete and malformed syntax. In particular, the use of macros like: .Pp .Dl #define forever for(;;) Index: head/usr.bin/locale/locale.c =================================================================== --- head/usr.bin/locale/locale.c +++ head/usr.bin/locale/locale.c @@ -466,10 +466,10 @@ && strcmp(lang, vval)) { /* * Appropriate environment variable set, its value - * is valid and not overriden by LC_ALL + * is valid and not overridden by LC_ALL * * XXX: possible side effect: if both LANG and - * overriden environment variable are set into same + * overridden environment variable are set into same * value, then it'll be assumed as 'implied' */ printf("%s=%s\n", lcinfo[i].name, vval); Index: head/usr.bin/look/look.1 =================================================================== --- head/usr.bin/look/look.1 +++ head/usr.bin/look/look.1 @@ -108,7 +108,7 @@ .Fl a and .Fl -alternative -flags are ignored for compability. +flags are ignored for compatibility. .Sh SEE ALSO .Xr grep 1 , .Xr sort 1 Index: head/usr.bin/mkimg/mkimg.1 =================================================================== --- head/usr.bin/mkimg/mkimg.1 +++ head/usr.bin/mkimg/mkimg.1 @@ -289,7 +289,7 @@ .Dl % mkimg -s mbr -b /boot/mbr -p freebsd:-'mkimg -s bsd -b /boot/boot \ -p freebsd-ufs:=root-file-system.ufs -p freebsd-swap::1G' -o mbr-bsd.img .Pp -To accomodate the need to have partitions named or numbered in a certain +To accommodate the need to have partitions named or numbered in a certain way, the .Nm utility allows for the specification of empty partitions. Index: head/usr.bin/mt/mt.c =================================================================== --- head/usr.bin/mt/mt.c +++ head/usr.bin/mt/mt.c @@ -1342,7 +1342,7 @@ break; case 'p': if (param_name != NULL) { - warnx("Only one paramter name may be " + warnx("Only one parameter name may be " "specified"); retval = 1; goto bailout; @@ -1354,7 +1354,7 @@ break; case 's': if (param_value != NULL) { - warnx("Only one paramter value may be " + warnx("Only one parameter value may be " "specified"); retval = 1; goto bailout; Index: head/usr.bin/patch/pch.c =================================================================== --- head/usr.bin/patch/pch.c +++ head/usr.bin/patch/pch.c @@ -499,7 +499,7 @@ LINENUM fillcnt; /* #lines of missing ptrn or repl */ LINENUM fillsrc; /* index of first line to copy */ LINENUM filldst; /* index of first missing line */ - bool ptrn_spaces_eaten; /* ptrn was slightly misformed */ + bool ptrn_spaces_eaten; /* ptrn was slightly malformed */ bool repl_could_be_missing; /* no + or ! lines in this hunk */ bool repl_missing; /* we are now backtracking */ off_t repl_backtrack_position; /* file pos of first repl line */ Index: head/usr.bin/pr/egetopt.c =================================================================== --- head/usr.bin/pr/egetopt.c +++ head/usr.bin/pr/egetopt.c @@ -76,7 +76,7 @@ { static char *place = emsg; /* option letter processing */ char *oli; /* option letter list index */ - static int delim; /* which option delimeter */ + static int delim; /* which option delimiter */ char *p; static char savec = '\0'; Index: head/usr.bin/sed/compile.c =================================================================== --- head/usr.bin/sed/compile.c +++ head/usr.bin/sed/compile.c @@ -364,7 +364,7 @@ } /* - * Get a delimited string. P points to the delimeter of the string; d points + * Get a delimited string. P points to the delimiter of the string; d points * to a buffer area. Newline and delimiter escapes are processed; other * escapes are ignored. * Index: head/usr.bin/sockstat/sockstat.c =================================================================== --- head/usr.bin/sockstat/sockstat.c +++ head/usr.bin/sockstat/sockstat.c @@ -373,7 +373,7 @@ htons(xinpcb->local_port)); break; default: - errx(1, "adress family %d not supported", + errx(1, "address family %d not supported", xladdr->address.sa.sa_family); } laddr->next = NULL; @@ -466,7 +466,7 @@ htons(xstcb->local_port)); break; default: - errx(1, "adress family %d not supported", + errx(1, "address family %d not supported", xladdr->address.sa.sa_family); } laddr->next = NULL; @@ -508,7 +508,7 @@ htons(xstcb->remote_port)); break; default: - errx(1, "adress family %d not supported", + errx(1, "address family %d not supported", xraddr->address.sa.sa_family); } faddr->next = NULL; Index: head/usr.bin/vgrind/regexp.c =================================================================== --- head/usr.bin/vgrind/regexp.c +++ head/usr.bin/vgrind/regexp.c @@ -318,7 +318,7 @@ /* - * The following routine recognises an irregular expresion + * The following routine recognises an irregular expression * with the following special characters: * * \? - means last match was optional Index: head/usr.sbin/bhyve/pci_emul.c =================================================================== --- head/usr.sbin/bhyve/pci_emul.c +++ head/usr.sbin/bhyve/pci_emul.c @@ -295,7 +295,7 @@ /* * The PCI standard only allows 4 and 8 byte accesses to the MSI-X - * table but we also allow 1 byte access to accomodate reads from + * table but we also allow 1 byte access to accommodate reads from * ddb. */ if (size != 1 && size != 4 && size != 8) Index: head/usr.sbin/bsdconfig/bsdconfig =================================================================== --- head/usr.sbin/bsdconfig/bsdconfig +++ head/usr.sbin/bsdconfig/bsdconfig @@ -131,7 +131,7 @@ # determine if we can use more than one column to display commands. # local x=$longest_cmd ncols=1 - x=$(( $x + 8 )) # Accomodate leading tab character + x=$(( $x + 8 )) # Accommodate leading tab character x=$(( $x + 3 + $longest_cmd )) # Preload end of next column while [ $x -lt $max_width ]; do ncols=$(( $ncols + 1 )) Index: head/usr.sbin/config/config.h =================================================================== --- head/usr.sbin/config/config.h +++ head/usr.sbin/config/config.h @@ -50,7 +50,7 @@ int f_type; /* type */ u_char f_flags; /* see below */ char *f_compilewith; /* special make rule if present */ - char *f_depends; /* additional dependancies */ + char *f_depends; /* additional dependencies */ char *f_clean; /* File list to add to clean rule */ char *f_warn; /* warning message */ const char *f_objprefix; /* prefix string for object name */ Index: head/usr.sbin/ctld/ctld.c =================================================================== --- head/usr.sbin/ctld/ctld.c +++ head/usr.sbin/ctld/ctld.c @@ -2028,7 +2028,7 @@ } /* - * Go through the new portals, opening the sockets as neccessary. + * Go through the new portals, opening the sockets as necessary. */ TAILQ_FOREACH(newpg, &newconf->conf_portal_groups, pg_next) { if (newpg->pg_foreign) Index: head/usr.sbin/fwcontrol/fwmpegts.c =================================================================== --- head/usr.sbin/fwcontrol/fwmpegts.c +++ head/usr.sbin/fwcontrol/fwmpegts.c @@ -119,7 +119,7 @@ 2) 1.5 < R < 3 Mbps: db0/db1 or db2/db3 or db4/db5 or db6/db7 is payload, 3) 3 < R < 6 Mbps: db0/db1/db2/db3 or db4/db5/db6/db7 is payload, 4) R > 6 Mbps: all db0..db7 contain the payload. -Curently, only case (4) is supported in fwmpegts.c +Currently, only case (4) is supported in fwmpegts.c Each packet may contain N MPEG TS data blocks with timestamp header, which are (4+188)B long. Experimentally, the N ranges from 0 through 3. Index: head/usr.sbin/jail/command.c =================================================================== --- head/usr.sbin/jail/command.c +++ head/usr.sbin/jail/command.c @@ -761,7 +761,7 @@ if (j->timeout.tv_sec == 0) requeue(j, &sleeping); else { - /* File the jail in the sleep queue acording to its timeout. */ + /* File the jail in the sleep queue according to its timeout. */ TAILQ_REMOVE(j->queue, j, tq); TAILQ_FOREACH(tj, &sleeping, tq) { if (!tj->timeout.tv_sec || Index: head/usr.sbin/jail/jailp.h =================================================================== --- head/usr.sbin/jail/jailp.h +++ head/usr.sbin/jail/jailp.h @@ -41,7 +41,7 @@ #define DF_SEEN 0x01 /* Dependency has been followed */ #define DF_LIGHT 0x02 /* Implied dependency on jail existence only */ -#define DF_NOFAIL 0x04 /* Don't propigate failed jails */ +#define DF_NOFAIL 0x04 /* Don't propagate failed jails */ #define PF_VAR 0x01 /* This is a variable, not a true parameter */ #define PF_APPEND 0x02 /* Append to existing parameter list */ Index: head/usr.sbin/jail/jailparse.y =================================================================== --- head/usr.sbin/jail/jailparse.y +++ head/usr.sbin/jail/jailparse.y @@ -103,7 +103,7 @@ /* * Parameters have a name and an optional list of value strings, - * which may have "+=" or "=" preceeding them. + * which may have "+=" or "=" preceding them. */ param : name { Index: head/usr.sbin/jls/jls.c =================================================================== --- head/usr.sbin/jls/jls.c +++ head/usr.sbin/jls/jls.c @@ -220,7 +220,7 @@ putchar('\n'); } - /* Fetch the jail(s) and print the paramters. */ + /* Fetch the jail(s) and print the parameters. */ if (jid != 0 || jname != NULL) { if (print_jail(pflags, jflags) < 0) errx(1, "%s", jail_errmsg); Index: head/usr.sbin/makefs/cd9660.c =================================================================== --- head/usr.sbin/makefs/cd9660.c +++ head/usr.sbin/makefs/cd9660.c @@ -163,7 +163,7 @@ /* - * Allocate and initalize a cd9660node + * Allocate and initialize a cd9660node * @returns struct cd9660node * Pointer to new node, or NULL on error */ static cd9660node * Index: head/usr.sbin/mfiutil/mfiutil.8 =================================================================== --- head/usr.sbin/mfiutil/mfiutil.8 +++ head/usr.sbin/mfiutil/mfiutil.8 @@ -607,25 +607,25 @@ argument for the commands below takes the form of a number from 0 to the total configurations found. .It Cm foreign clear Op config -Clear the specifed foreign +Clear the specified foreign .Ar config or all if no .Ar config argument is provided. .It Cm foreign diag Op config -Display a diagnostic display of the specifed foreign +Display a diagnostic display of the specified foreign .Ar config or all if no .Ar config argument is provided. .It Cm foreign preview Op config -Preview the specifed foreign +Preview the specified foreign .Ar config after import or all if no .Ar config argument is provided. .It Cm foreign import Op config -Import the specifed foreign +Import the specified foreign .Ar config or all if no .Ar config Index: head/usr.sbin/nandsim/nandsim.8 =================================================================== --- head/usr.sbin/nandsim/nandsim.8 +++ head/usr.sbin/nandsim/nandsim.8 @@ -177,7 +177,7 @@ .El .It Ic log Prints activity log of the specified controller to stdout; if -controller number is not specifed, logs for all available +controller number is not specified, logs for all available controllers are printed. .It Ic stats Print statistics of the selected controller, chip and page. Index: head/usr.sbin/nandsim/nandsim.c =================================================================== --- head/usr.sbin/nandsim/nandsim.c +++ head/usr.sbin/nandsim/nandsim.c @@ -421,7 +421,7 @@ if (gargc >= 4) { if (strcmp(gargv[2], "--loglevel") == 0 || strcmp(gargv[2], "-l") == 0) { - /* Set loglevel (ctrl:chip pair independant) */ + /* Set loglevel (ctrl:chip pair independent) */ mods.field = SIM_MOD_LOG_LEVEL; if (convert_arguint(gargv[3], &mods.new_value) != 0) Index: head/usr.sbin/nandsim/nandsim_cfgparse.c =================================================================== --- head/usr.sbin/nandsim/nandsim_cfgparse.c +++ head/usr.sbin/nandsim/nandsim_cfgparse.c @@ -349,7 +349,7 @@ /* * ECC layout have to end up with 0xffff, so * we're filling buffer with 0xff. If ecc_layout is - * defined in config file, values will be overriden. + * defined in config file, values will be overridden. */ memset((void *)&ctrl_conf.ecc_layout, 0xff, sizeof(ctrl_conf.ecc_layout)); @@ -411,7 +411,7 @@ /* * Bad block map have to end up with 0xffff, so * we're filling array with 0xff. If bad block map is - * defined in config file, values will be overriden. + * defined in config file, values will be overridden. */ memset((void *)&chip_conf.bad_block_map, 0xff, sizeof(chip_conf.bad_block_map)); Index: head/usr.sbin/ndp/ndp.c =================================================================== --- head/usr.sbin/ndp/ndp.c +++ head/usr.sbin/ndp/ndp.c @@ -675,7 +675,7 @@ printf("%-*.*s %-*.*s %*.*s", addrwidth, addrwidth, host_buf, llwidth, llwidth, ether_str(sdl), ifwidth, ifwidth, ifname); - /* Print neighbor discovery specific informations */ + /* Print neighbor discovery specific information */ nbi = getnbrinfo(&sin->sin6_addr, sdl->sdl_index, 1); if (nbi) { if (nbi->expire > now.tv_sec) { Index: head/usr.sbin/newsyslog/newsyslog.c =================================================================== --- head/usr.sbin/newsyslog/newsyslog.c +++ head/usr.sbin/newsyslog/newsyslog.c @@ -1915,7 +1915,7 @@ /* * Compute the pause between consecutive signals. Use a longer * sleep time if we will be sending two signals to the same - * deamon or process-group. + * daemon or process-group. */ secs = 0; nextsig = SLIST_NEXT(swork, sw_nextp); Index: head/usr.sbin/pmcstudy/eval_expr.c =================================================================== --- head/usr.sbin/pmcstudy/eval_expr.c +++ head/usr.sbin/pmcstudy/eval_expr.c @@ -444,7 +444,7 @@ * val OP val * val OP ( * d) A final optional step (not implemented yet) would be - * to insert the mathimatical precedence paran's. For + * to insert the mathematical precedence paran's. For * the start we will just do the left to right evaluation and * then later we can add this guy to add paran's to make it * mathimatically correct... i.e instead of 1 + 2 * 3 we Index: head/usr.sbin/ppp/ip.c =================================================================== --- head/usr.sbin/ppp/ip.c +++ head/usr.sbin/ppp/ip.c @@ -473,7 +473,7 @@ ncpaddr_ntoa(&srcaddr), sport, dstip, dport); } return 1; - } /* Explict match. Deny this packet */ + } /* Explicit match. Deny this packet */ } } else { n++; Index: head/usr.sbin/ppp/ppp.8 =================================================================== --- head/usr.sbin/ppp/ppp.8 +++ head/usr.sbin/ppp/ppp.8 @@ -5404,7 +5404,7 @@ .Dq default can be used for .Ar dest -to sepcify the default route, and +to specify the default route, and .Dq 0.0.0.0 is understood to be the same as .Dq default @@ -5454,7 +5454,7 @@ .Dq default can be used for .Ar dest -to sepcify the default route, and +to specify the default route, and .Dq :: is understood to be the same as .Dq default Index: head/usr.sbin/rtsold/rtsold.h =================================================================== --- head/usr.sbin/rtsold/rtsold.h +++ head/usr.sbin/rtsold/rtsold.h @@ -67,7 +67,7 @@ int active; /* interface status */ int probeinterval; /* interval of probe timer (if necessary) */ int probetimer; /* rest of probe timer */ - int mediareqok; /* wheter the IF supports SIOCGIFMEDIA */ + int mediareqok; /* whether the IF supports SIOCGIFMEDIA */ int otherconfig; /* need a separate protocol for the "other" * configuration */ int state; Index: head/usr.sbin/uefisign/magic.h =================================================================== --- head/usr.sbin/uefisign/magic.h +++ head/usr.sbin/uefisign/magic.h @@ -50,7 +50,7 @@ "a = FORMAT:HEX,BITSTRING:00\n" /* * Well, there should be some other struct here, "SPCLink", but it doesn't - * appear to be neccessary for UEFI, and I have no idea how to synthesize it, + * appear to be necessary for UEFI, and I have no idea how to synthesize it, * as it uses the CHOICE type. */ "\n" Index: head/usr.sbin/uefisign/pe.c =================================================================== --- head/usr.sbin/uefisign/pe.c +++ head/usr.sbin/uefisign/pe.c @@ -304,7 +304,7 @@ * Note that most software does not care about the checksum at all; perhaps * we could just set it to 0 instead. * - * XXX: Endianess? + * XXX: Endianness? */ static uint32_t compute_checksum(const struct executable *x) Index: head/usr.sbin/ypbind/ypbind.c =================================================================== --- head/usr.sbin/ypbind/ypbind.c +++ head/usr.sbin/ypbind/ypbind.c @@ -396,7 +396,7 @@ if (flock(yplockfd, LOCK_EX|LOCK_NB) == -1 && errno == EWOULDBLOCK) errx(1, "another ypbind is already running. Aborting"); - /* XXX domainname will be overriden if we use restricted mode */ + /* XXX domainname will be overridden if we use restricted mode */ yp_get_default_domain(&domain_name); if (domain_name[0] == '\0') errx(1, "domainname not set. Aborting"); Index: head/usr.sbin/ypserv/ypinit.sh =================================================================== --- head/usr.sbin/ypserv/ypinit.sh +++ head/usr.sbin/ypserv/ypinit.sh @@ -235,7 +235,7 @@ for MAP in ${YPMAPLIST} do - echo "Transfering ${MAP}..." + echo "Transferring ${MAP}..." if ! ${YPXFR} -p ${YP_DIR} -h ${MASTER} -c -d ${DOMAIN} ${MAP}; then echo "Can't transfer map ${MAP}." 1>&2 ERROR_EXISTS="YES"