Index: share/man/man4/em.4
===================================================================
--- share/man/man4/em.4
+++ share/man/man4/em.4
@@ -205,6 +205,10 @@
 prompt before booting the kernel or stored in
 .Xr loader.conf 5 .
 .Bl -tag -width indent
+.It Va hw.em.disable_crc_stripping
+Disable or enable hardware stripping of CRC field.  Most often used
+on BMC/IPMI shared interfaces.
+Default 0 (enabled)
 .It Va hw.em.eee_setting
 Disable or enable Energy Efficient Ethernet.
 Default 1 (disabled).
Index: sys/dev/e1000/if_em.c
===================================================================
--- sys/dev/e1000/if_em.c
+++ sys/dev/e1000/if_em.c
@@ -366,6 +366,10 @@
 
 static SYSCTL_NODE(_hw, OID_AUTO, em, CTLFLAG_RD, 0, "EM driver parameters");
 
+static int em_disable_crc_stripping = 0;
+SYSCTL_INT(_hw_em, OID_AUTO, disable_crc_stripping, CTLFLAG_RD,
+    &em_disable_crc_stripping, 0, "Disable CRC Stripping");
+
 static int em_tx_int_delay_dflt = EM_TICKS_TO_USECS(EM_TIDV);
 static int em_rx_int_delay_dflt = EM_TICKS_TO_USECS(EM_RDTR);
 SYSCTL_INT(_hw_em, OID_AUTO, tx_int_delay, CTLFLAG_RDTUN, &em_tx_int_delay_dflt,
@@ -4514,7 +4518,8 @@
 	    (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
 
         /* Strip the CRC */
-        rctl |= E1000_RCTL_SECRC;
+        if (!em_disable_crc_stripping)
+		rctl |= E1000_RCTL_SECRC;
 
         /* Make sure VLAN Filters are off */
         rctl &= ~E1000_RCTL_VFE;