Index: head/UPDATING =================================================================== --- head/UPDATING +++ head/UPDATING @@ -31,6 +31,11 @@ disable the most expensive debugging functionality run "ln -s 'abort:false,junk:false' /etc/malloc.conf".) +20150805: + GNU Binutils versions of addr2line, c++filt, nm, readelf, size, + strings and strip have been removed. The src.conf(5) knob + WITHOUT_ELFTOOLCHAIN_TOOLS no longer provides the binutils tools. + 20150728: As ZFS requires more kernel stack pages than is the default on some architectures e.g. i386, it now warns if KSTACK_PAGES is less than @@ -224,7 +229,7 @@ taken from the ELF Tool Chain project rather than GNU binutils. They should be drop-in replacements, with the addition of arm64 support. The WITHOUT_ELFTOOLCHAIN_TOOLS= knob may be used to obtain the - binutils tools, if necessary. + binutils tools, if necessary. See 20150805 for updated information. 20150105: The default Unbound configuration now enables remote control Index: head/gnu/usr.bin/binutils/Makefile =================================================================== --- head/gnu/usr.bin/binutils/Makefile +++ head/gnu/usr.bin/binutils/Makefile @@ -7,25 +7,11 @@ libbfd \ libopcodes \ libbinutils \ - ${_addr2line} \ as \ ld \ - ${_nm} \ ${_objcopy} \ objdump \ - ${_readelf} \ - ${_size} \ - ${_strings} \ - ${_strip} -.if ${MK_ELFTOOLCHAIN_TOOLS} == "no" -_addr2line= addr2line -_nm= nm -_readelf= readelf -_size= size -_strings= strings -_strip= strip -.endif .if ${MK_ELFTOOLCHAIN_TOOLS} == "no" || ${MK_ELFCOPY_AS_OBJCOPY} == "no" _objcopy= objcopy .endif Index: head/gnu/usr.bin/binutils/addr2line/Makefile =================================================================== --- head/gnu/usr.bin/binutils/addr2line/Makefile +++ head/gnu/usr.bin/binutils/addr2line/Makefile @@ -1,17 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -PROG= addr2line -SRCS= addr2line.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -CFLAGS+= -I${SRCDIR}/binutils -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} - -.include Index: head/gnu/usr.bin/binutils/addr2line/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/addr2line/Makefile.depend +++ head/gnu/usr.bin/binutils/addr2line/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/addr2line/addr2line.1 =================================================================== --- head/gnu/usr.bin/binutils/addr2line/addr2line.1 +++ head/gnu/usr.bin/binutils/addr2line/addr2line.1 @@ -1,266 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "ADDR2LINE 1" -.TH ADDR2LINE 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -addr2line \- convert addresses into file names and line numbers -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -addr2line [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR] - [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]] - [\fB\-e\fR \fIfilename\fR|\fB\-\-exe=\fR\fIfilename\fR] - [\fB\-f\fR|\fB\-\-functions\fR] [\fB\-s\fR|\fB\-\-basename\fR] - [\fB\-i\fR|\fB\-\-inlines\fR] - [\fB\-j\fR|\fB\-\-section=\fR\fIname\fR] - [\fB\-H\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] - [addr addr ...] -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -\&\fBaddr2line\fR translates addresses into file names and line numbers. -Given an address in an executable or an offset in a section of a relocatable -object, it uses the debugging information to figure out which file name and -line number are associated with it. -.PP -The executable or relocatable object to use is specified with the \fB\-e\fR -option. The default is the file \fIa.out\fR. The section in the relocatable -object to use is specified with the \fB\-j\fR option. -.PP -\&\fBaddr2line\fR has two modes of operation. -.PP -In the first, hexadecimal addresses are specified on the command line, -and \fBaddr2line\fR displays the file name and line number for each -address. -.PP -In the second, \fBaddr2line\fR reads hexadecimal addresses from -standard input, and prints the file name and line number for each -address on standard output. In this mode, \fBaddr2line\fR may be used -in a pipe to convert dynamically chosen addresses. -.PP -The format of the output is \fB\s-1FILENAME:LINENO\s0\fR. The file name and -line number for each address is printed on a separate line. If the -\&\fB\-f\fR option is used, then each \fB\s-1FILENAME:LINENO\s0\fR line is -preceded by a \fB\s-1FUNCTIONNAME\s0\fR line which is the name of the function -containing the address. -.PP -If the file name or function name can not be determined, -\&\fBaddr2line\fR will print two question marks in their place. If the -line number can not be determined, \fBaddr2line\fR will print 0. -.SH "OPTIONS" -.IX Header "OPTIONS" -The long and short forms of options, shown here as alternatives, are -equivalent. -.IP "\fB\-b\fR \fIbfdname\fR" 4 -.IX Item "-b bfdname" -.PD 0 -.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 -.IX Item "--target=bfdname" -.PD -Specify that the object-code format for the object files is -\&\fIbfdname\fR. -.IP "\fB\-C\fR" 4 -.IX Item "-C" -.PD 0 -.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4 -.IX Item "--demangle[=style]" -.PD -Decode (\fIdemangle\fR) low-level symbol names into user-level names. -Besides removing any initial underscore prepended by the system, this -makes \*(C+ function names readable. Different compilers have different -mangling styles. The optional demangling style argument can be used to -choose an appropriate demangling style for your compiler. -.IP "\fB\-e\fR \fIfilename\fR" 4 -.IX Item "-e filename" -.PD 0 -.IP "\fB\-\-exe=\fR\fIfilename\fR" 4 -.IX Item "--exe=filename" -.PD -Specify the name of the executable for which addresses should be -translated. The default file is \fIa.out\fR. -.IP "\fB\-f\fR" 4 -.IX Item "-f" -.PD 0 -.IP "\fB\-\-functions\fR" 4 -.IX Item "--functions" -.PD -Display function names as well as file and line number information. -.IP "\fB\-s\fR" 4 -.IX Item "-s" -.PD 0 -.IP "\fB\-\-basenames\fR" 4 -.IX Item "--basenames" -.PD -Display only the base of each file name. -.IP "\fB\-i\fR" 4 -.IX Item "-i" -.PD 0 -.IP "\fB\-\-inlines\fR" 4 -.IX Item "--inlines" -.PD -If the address belongs to a function that was inlined, the source -information for all enclosing scopes back to the first non-inlined -function will also be printed. For example, if \f(CW\*(C`main\*(C'\fR inlines -\&\f(CW\*(C`callee1\*(C'\fR which inlines \f(CW\*(C`callee2\*(C'\fR, and address is from -\&\f(CW\*(C`callee2\*(C'\fR, the source information for \f(CW\*(C`callee1\*(C'\fR and \f(CW\*(C`main\*(C'\fR -will also be printed. -.IP "\fB\-j\fR" 4 -.IX Item "-j" -.PD 0 -.IP "\fB\-\-section\fR" 4 -.IX Item "--section" -.PD -Read offsets relative to the specified section instead of absolute addresses. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/binutils/ar/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/ar/Makefile.depend +++ head/gnu/usr.bin/binutils/ar/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,} - -DIRDEPS = \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/nm/Makefile =================================================================== --- head/gnu/usr.bin/binutils/nm/Makefile +++ head/gnu/usr.bin/binutils/nm/Makefile @@ -1,18 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -PROG= nm -SRCS= nm.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -CFLAGS+= -I${SRCDIR}/bfd -CFLAGS+= -I${SRCDIR}/binutils -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} - -.include Index: head/gnu/usr.bin/binutils/nm/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/nm/Makefile.depend +++ head/gnu/usr.bin/binutils/nm/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/nm/nm.1 =================================================================== --- head/gnu/usr.bin/binutils/nm/nm.1 +++ head/gnu/usr.bin/binutils/nm/nm.1 @@ -1,450 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "NM 1" -.TH NM 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -nm \- list symbols from object files -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -nm [\fB\-a\fR|\fB\-\-debug\-syms\fR] [\fB\-g\fR|\fB\-\-extern\-only\fR] - [\fB\-B\fR] [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]] [\fB\-D\fR|\fB\-\-dynamic\fR] - [\fB\-S\fR|\fB\-\-print\-size\fR] [\fB\-s\fR|\fB\-\-print\-armap\fR] - [\fB\-A\fR|\fB\-o\fR|\fB\-\-print\-file\-name\fR][\fB\-\-special\-syms\fR] - [\fB\-n\fR|\fB\-v\fR|\fB\-\-numeric\-sort\fR] [\fB\-p\fR|\fB\-\-no\-sort\fR] - [\fB\-r\fR|\fB\-\-reverse\-sort\fR] [\fB\-\-size\-sort\fR] [\fB\-u\fR|\fB\-\-undefined\-only\fR] - [\fB\-t\fR \fIradix\fR|\fB\-\-radix=\fR\fIradix\fR] [\fB\-P\fR|\fB\-\-portability\fR] - [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-f\fR\fIformat\fR|\fB\-\-format=\fR\fIformat\fR] - [\fB\-\-defined\-only\fR] [\fB\-l\fR|\fB\-\-line\-numbers\fR] [\fB\-\-no\-demangle\fR] - [\fB\-V\fR|\fB\-\-version\fR] [\fB\-X 32_64\fR] [\fB\-\-help\fR] [\fIobjfile\fR...] -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -\&\s-1GNU\s0 \fBnm\fR lists the symbols from object files \fIobjfile\fR.... -If no object files are listed as arguments, \fBnm\fR assumes the file -\&\fIa.out\fR. -.PP -For each symbol, \fBnm\fR shows: -.IP "\(bu" 4 -The symbol value, in the radix selected by options (see below), or -hexadecimal by default. -.IP "\(bu" 4 -The symbol type. At least the following types are used; others are, as -well, depending on the object file format. If lowercase, the symbol is -local; if uppercase, the symbol is global (external). -.RS 4 -.ie n .IP """A""" 4 -.el .IP "\f(CWA\fR" 4 -.IX Item "A" -The symbol's value is absolute, and will not be changed by further -linking. -.ie n .IP """B""" 4 -.el .IP "\f(CWB\fR" 4 -.IX Item "B" -The symbol is in the uninitialized data section (known as \s-1BSS\s0). -.ie n .IP """C""" 4 -.el .IP "\f(CWC\fR" 4 -.IX Item "C" -The symbol is common. Common symbols are uninitialized data. When -linking, multiple common symbols may appear with the same name. If the -symbol is defined anywhere, the common symbols are treated as undefined -references. -.ie n .IP """D""" 4 -.el .IP "\f(CWD\fR" 4 -.IX Item "D" -The symbol is in the initialized data section. -.ie n .IP """G""" 4 -.el .IP "\f(CWG\fR" 4 -.IX Item "G" -The symbol is in an initialized data section for small objects. Some -object file formats permit more efficient access to small data objects, -such as a global int variable as opposed to a large global array. -.ie n .IP """I""" 4 -.el .IP "\f(CWI\fR" 4 -.IX Item "I" -The symbol is an indirect reference to another symbol. This is a \s-1GNU\s0 -extension to the a.out object file format which is rarely used. -.ie n .IP """N""" 4 -.el .IP "\f(CWN\fR" 4 -.IX Item "N" -The symbol is a debugging symbol. -.ie n .IP """R""" 4 -.el .IP "\f(CWR\fR" 4 -.IX Item "R" -The symbol is in a read only data section. -.ie n .IP """S""" 4 -.el .IP "\f(CWS\fR" 4 -.IX Item "S" -The symbol is in an uninitialized data section for small objects. -.ie n .IP """T""" 4 -.el .IP "\f(CWT\fR" 4 -.IX Item "T" -The symbol is in the text (code) section. -.ie n .IP """U""" 4 -.el .IP "\f(CWU\fR" 4 -.IX Item "U" -The symbol is undefined. -.ie n .IP """V""" 4 -.el .IP "\f(CWV\fR" 4 -.IX Item "V" -The symbol is a weak object. When a weak defined symbol is linked with -a normal defined symbol, the normal defined symbol is used with no error. -When a weak undefined symbol is linked and the symbol is not defined, -the value of the weak symbol becomes zero with no error. -.ie n .IP """W""" 4 -.el .IP "\f(CWW\fR" 4 -.IX Item "W" -The symbol is a weak symbol that has not been specifically tagged as a -weak object symbol. When a weak defined symbol is linked with a normal -defined symbol, the normal defined symbol is used with no error. -When a weak undefined symbol is linked and the symbol is not defined, -the value of the symbol is determined in a system-specific manner without -error. On some systems, uppercase indicates that a default value has been -specified. -.ie n .IP """\-""" 4 -.el .IP "\f(CW\-\fR" 4 -.IX Item "-" -The symbol is a stabs symbol in an a.out object file. In this case, the -next values printed are the stabs other field, the stabs desc field, and -the stab type. Stabs symbols are used to hold debugging information. -.ie n .IP """?""" 4 -.el .IP "\f(CW?\fR" 4 -.IX Item "?" -The symbol type is unknown, or object file format specific. -.RE -.RS 4 -.RE -.IP "\(bu" 4 -The symbol name. -.SH "OPTIONS" -.IX Header "OPTIONS" -The long and short forms of options, shown here as alternatives, are -equivalent. -.IP "\fB\-A\fR" 4 -.IX Item "-A" -.PD 0 -.IP "\fB\-o\fR" 4 -.IX Item "-o" -.IP "\fB\-\-print\-file\-name\fR" 4 -.IX Item "--print-file-name" -.PD -Precede each symbol by the name of the input file (or archive member) -in which it was found, rather than identifying the input file once only, -before all of its symbols. -.IP "\fB\-a\fR" 4 -.IX Item "-a" -.PD 0 -.IP "\fB\-\-debug\-syms\fR" 4 -.IX Item "--debug-syms" -.PD -Display all symbols, even debugger-only symbols; normally these are not -listed. -.IP "\fB\-B\fR" 4 -.IX Item "-B" -The same as \fB\-\-format=bsd\fR (for compatibility with the \s-1MIPS\s0 \fBnm\fR). -.IP "\fB\-C\fR" 4 -.IX Item "-C" -.PD 0 -.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4 -.IX Item "--demangle[=style]" -.PD -Decode (\fIdemangle\fR) low-level symbol names into user-level names. -Besides removing any initial underscore prepended by the system, this -makes \*(C+ function names readable. Different compilers have different -mangling styles. The optional demangling style argument can be used to -choose an appropriate demangling style for your compiler. -.IP "\fB\-\-no\-demangle\fR" 4 -.IX Item "--no-demangle" -Do not demangle low-level symbol names. This is the default. -.IP "\fB\-D\fR" 4 -.IX Item "-D" -.PD 0 -.IP "\fB\-\-dynamic\fR" 4 -.IX Item "--dynamic" -.PD -Display the dynamic symbols rather than the normal symbols. This is -only meaningful for dynamic objects, such as certain types of shared -libraries. -.IP "\fB\-f\fR \fIformat\fR" 4 -.IX Item "-f format" -.PD 0 -.IP "\fB\-\-format=\fR\fIformat\fR" 4 -.IX Item "--format=format" -.PD -Use the output format \fIformat\fR, which can be \f(CW\*(C`bsd\*(C'\fR, -\&\f(CW\*(C`sysv\*(C'\fR, or \f(CW\*(C`posix\*(C'\fR. The default is \f(CW\*(C`bsd\*(C'\fR. -Only the first character of \fIformat\fR is significant; it can be -either upper or lower case. -.IP "\fB\-g\fR" 4 -.IX Item "-g" -.PD 0 -.IP "\fB\-\-extern\-only\fR" 4 -.IX Item "--extern-only" -.PD -Display only external symbols. -.IP "\fB\-l\fR" 4 -.IX Item "-l" -.PD 0 -.IP "\fB\-\-line\-numbers\fR" 4 -.IX Item "--line-numbers" -.PD -For each symbol, use debugging information to try to find a filename and -line number. For a defined symbol, look for the line number of the -address of the symbol. For an undefined symbol, look for the line -number of a relocation entry which refers to the symbol. If line number -information can be found, print it after the other symbol information. -.IP "\fB\-n\fR" 4 -.IX Item "-n" -.PD 0 -.IP "\fB\-v\fR" 4 -.IX Item "-v" -.IP "\fB\-\-numeric\-sort\fR" 4 -.IX Item "--numeric-sort" -.PD -Sort symbols numerically by their addresses, rather than alphabetically -by their names. -.IP "\fB\-p\fR" 4 -.IX Item "-p" -.PD 0 -.IP "\fB\-\-no\-sort\fR" 4 -.IX Item "--no-sort" -.PD -Do not bother to sort the symbols in any order; print them in the order -encountered. -.IP "\fB\-P\fR" 4 -.IX Item "-P" -.PD 0 -.IP "\fB\-\-portability\fR" 4 -.IX Item "--portability" -.PD -Use the \s-1POSIX\s0.2 standard output format instead of the default format. -Equivalent to \fB\-f posix\fR. -.IP "\fB\-S\fR" 4 -.IX Item "-S" -.PD 0 -.IP "\fB\-\-print\-size\fR" 4 -.IX Item "--print-size" -.PD -Print size, not the value, of defined symbols for the \f(CW\*(C`bsd\*(C'\fR output format. -.IP "\fB\-s\fR" 4 -.IX Item "-s" -.PD 0 -.IP "\fB\-\-print\-armap\fR" 4 -.IX Item "--print-armap" -.PD -When listing symbols from archive members, include the index: a mapping -(stored in the archive by \fBar\fR or \fBranlib\fR) of which modules -contain definitions for which names. -.IP "\fB\-r\fR" 4 -.IX Item "-r" -.PD 0 -.IP "\fB\-\-reverse\-sort\fR" 4 -.IX Item "--reverse-sort" -.PD -Reverse the order of the sort (whether numeric or alphabetic); let the -last come first. -.IP "\fB\-\-size\-sort\fR" 4 -.IX Item "--size-sort" -Sort symbols by size. The size is computed as the difference between -the value of the symbol and the value of the symbol with the next higher -value. If the \f(CW\*(C`bsd\*(C'\fR output format is used the size of the symbol -is printed, rather than the value, and \fB\-S\fR must be used in order -both size and value to be printed. -.IP "\fB\-\-special\-syms\fR" 4 -.IX Item "--special-syms" -Display symbols which have a target-specific special meaning. These -symbols are usually used by the target for some special processing and -are not normally helpful when included included in the normal symbol -lists. For example for \s-1ARM\s0 targets this option would skip the mapping -symbols used to mark transitions between \s-1ARM\s0 code, \s-1THUMB\s0 code and -data. -.IP "\fB\-t\fR \fIradix\fR" 4 -.IX Item "-t radix" -.PD 0 -.IP "\fB\-\-radix=\fR\fIradix\fR" 4 -.IX Item "--radix=radix" -.PD -Use \fIradix\fR as the radix for printing the symbol values. It must be -\&\fBd\fR for decimal, \fBo\fR for octal, or \fBx\fR for hexadecimal. -.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 -.IX Item "--target=bfdname" -Specify an object code format other than your system's default format. -.IP "\fB\-u\fR" 4 -.IX Item "-u" -.PD 0 -.IP "\fB\-\-undefined\-only\fR" 4 -.IX Item "--undefined-only" -.PD -Display only undefined symbols (those external to each object file). -.IP "\fB\-\-defined\-only\fR" 4 -.IX Item "--defined-only" -Display only defined symbols for each object file. -.IP "\fB\-V\fR" 4 -.IX Item "-V" -.PD 0 -.IP "\fB\-\-version\fR" 4 -.IX Item "--version" -.PD -Show the version number of \fBnm\fR and exit. -.IP "\fB\-X\fR" 4 -.IX Item "-X" -This option is ignored for compatibility with the \s-1AIX\s0 version of -\&\fBnm\fR. It takes one parameter which must be the string -\&\fB32_64\fR. The default mode of \s-1AIX\s0 \fBnm\fR corresponds -to \fB\-X 32\fR, which is not supported by \s-1GNU\s0 \fBnm\fR. -.IP "\fB\-\-help\fR" 4 -.IX Item "--help" -Show a summary of the options to \fBnm\fR and exit. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/binutils/ranlib/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/ranlib/Makefile.depend +++ head/gnu/usr.bin/binutils/ranlib/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,} - -DIRDEPS = \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/readelf/Makefile =================================================================== --- head/gnu/usr.bin/binutils/readelf/Makefile +++ head/gnu/usr.bin/binutils/readelf/Makefile @@ -1,20 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -# No a.out vs. ELF version so don't install in /usr/libexec/elf -BINDIR=/usr/bin - -PROG= readelf -SRCS= ${PROG}.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -I${SRCDIR}/binutils - -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} - -.include Index: head/gnu/usr.bin/binutils/readelf/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/readelf/Makefile.depend +++ head/gnu/usr.bin/binutils/readelf/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/readelf/readelf.1 =================================================================== --- head/gnu/usr.bin/binutils/readelf/readelf.1 +++ head/gnu/usr.bin/binutils/readelf/readelf.1 @@ -1,377 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "READELF 1" -.TH READELF 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -readelf \- Displays information about ELF files. -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -readelf [\fB\-a\fR|\fB\-\-all\fR] - [\fB\-h\fR|\fB\-\-file\-header\fR] - [\fB\-l\fR|\fB\-\-program\-headers\fR|\fB\-\-segments\fR] - [\fB\-S\fR|\fB\-\-section\-headers\fR|\fB\-\-sections\fR] - [\fB\-g\fR|\fB\-\-section\-groups\fR] - [\fB\-t\fR|\fB\-\-section\-details\fR] - [\fB\-e\fR|\fB\-\-headers\fR] - [\fB\-s\fR|\fB\-\-syms\fR|\fB\-\-symbols\fR] - [\fB\-n\fR|\fB\-\-notes\fR] - [\fB\-r\fR|\fB\-\-relocs\fR] - [\fB\-u\fR|\fB\-\-unwind\fR] - [\fB\-d\fR|\fB\-\-dynamic\fR] - [\fB\-V\fR|\fB\-\-version\-info\fR] - [\fB\-A\fR|\fB\-\-arch\-specific\fR] - [\fB\-D\fR|\fB\-\-use\-dynamic\fR] - [\fB\-x\fR |\fB\-\-hex\-dump=\fR] - [\fB\-w[liaprmfFsoR]\fR| - \fB\-\-debug\-dump\fR[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]] - [\fB\-I\fR|\fB\-histogram\fR] - [\fB\-v\fR|\fB\-\-version\fR] - [\fB\-W\fR|\fB\-\-wide\fR] - [\fB\-H\fR|\fB\-\-help\fR] - \fIelffile\fR... -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -\&\fBreadelf\fR displays information about one or more \s-1ELF\s0 format object -files. The options control what particular information to display. -.PP -\&\fIelffile\fR... are the object files to be examined. 32\-bit and -64\-bit \s-1ELF\s0 files are supported, as are archives containing \s-1ELF\s0 files. -.PP -This program performs a similar function to \fBobjdump\fR but it -goes into more detail and it exists independently of the \s-1BFD\s0 -library, so if there is a bug in \s-1BFD\s0 then readelf will not be -affected. -.SH "OPTIONS" -.IX Header "OPTIONS" -The long and short forms of options, shown here as alternatives, are -equivalent. At least one option besides \fB\-v\fR or \fB\-H\fR must be -given. -.IP "\fB\-a\fR" 4 -.IX Item "-a" -.PD 0 -.IP "\fB\-\-all\fR" 4 -.IX Item "--all" -.PD -Equivalent to specifying \fB\-\-file\-header\fR, -\&\fB\-\-program\-headers\fR, \fB\-\-sections\fR, \fB\-\-symbols\fR, -\&\fB\-\-relocs\fR, \fB\-\-dynamic\fR, \fB\-\-notes\fR and -\&\fB\-\-version\-info\fR. -.IP "\fB\-h\fR" 4 -.IX Item "-h" -.PD 0 -.IP "\fB\-\-file\-header\fR" 4 -.IX Item "--file-header" -.PD -Displays the information contained in the \s-1ELF\s0 header at the start of the -file. -.IP "\fB\-l\fR" 4 -.IX Item "-l" -.PD 0 -.IP "\fB\-\-program\-headers\fR" 4 -.IX Item "--program-headers" -.IP "\fB\-\-segments\fR" 4 -.IX Item "--segments" -.PD -Displays the information contained in the file's segment headers, if it -has any. -.IP "\fB\-S\fR" 4 -.IX Item "-S" -.PD 0 -.IP "\fB\-\-sections\fR" 4 -.IX Item "--sections" -.IP "\fB\-\-section\-headers\fR" 4 -.IX Item "--section-headers" -.PD -Displays the information contained in the file's section headers, if it -has any. -.IP "\fB\-g\fR" 4 -.IX Item "-g" -.PD 0 -.IP "\fB\-\-section\-groups\fR" 4 -.IX Item "--section-groups" -.PD -Displays the information contained in the file's section groups, if it -has any. -.IP "\fB\-t\fR" 4 -.IX Item "-t" -.PD 0 -.IP "\fB\-\-section\-details\fR" 4 -.IX Item "--section-details" -.PD -Displays the detailed section information. Implies \fB\-S\fR. -.IP "\fB\-s\fR" 4 -.IX Item "-s" -.PD 0 -.IP "\fB\-\-symbols\fR" 4 -.IX Item "--symbols" -.IP "\fB\-\-syms\fR" 4 -.IX Item "--syms" -.PD -Displays the entries in symbol table section of the file, if it has one. -.IP "\fB\-e\fR" 4 -.IX Item "-e" -.PD 0 -.IP "\fB\-\-headers\fR" 4 -.IX Item "--headers" -.PD -Display all the headers in the file. Equivalent to \fB\-h \-l \-S\fR. -.IP "\fB\-n\fR" 4 -.IX Item "-n" -.PD 0 -.IP "\fB\-\-notes\fR" 4 -.IX Item "--notes" -.PD -Displays the contents of the \s-1NOTE\s0 segments and/or sections, if any. -.IP "\fB\-r\fR" 4 -.IX Item "-r" -.PD 0 -.IP "\fB\-\-relocs\fR" 4 -.IX Item "--relocs" -.PD -Displays the contents of the file's relocation section, if it has one. -.IP "\fB\-u\fR" 4 -.IX Item "-u" -.PD 0 -.IP "\fB\-\-unwind\fR" 4 -.IX Item "--unwind" -.PD -Displays the contents of the file's unwind section, if it has one. Only -the unwind sections for \s-1IA64\s0 \s-1ELF\s0 files are currently supported. -.IP "\fB\-d\fR" 4 -.IX Item "-d" -.PD 0 -.IP "\fB\-\-dynamic\fR" 4 -.IX Item "--dynamic" -.PD -Displays the contents of the file's dynamic section, if it has one. -.IP "\fB\-V\fR" 4 -.IX Item "-V" -.PD 0 -.IP "\fB\-\-version\-info\fR" 4 -.IX Item "--version-info" -.PD -Displays the contents of the version sections in the file, it they -exist. -.IP "\fB\-A\fR" 4 -.IX Item "-A" -.PD 0 -.IP "\fB\-\-arch\-specific\fR" 4 -.IX Item "--arch-specific" -.PD -Displays architecture-specific information in the file, if there -is any. -.IP "\fB\-D\fR" 4 -.IX Item "-D" -.PD 0 -.IP "\fB\-\-use\-dynamic\fR" 4 -.IX Item "--use-dynamic" -.PD -When displaying symbols, this option makes \fBreadelf\fR use the -symbol table in the file's dynamic section, rather than the one in the -symbols section. -.IP "\fB\-x \fR" 4 -.IX Item "-x " -.PD 0 -.IP "\fB\-\-hex\-dump=\fR" 4 -.IX Item "--hex-dump=" -.PD -Displays the contents of the indicated section as a hexadecimal dump. -A number identifies a particular section by index in the section table; -any other string identifies all sections with that name in the object file. -.IP "\fB\-w[liaprmfFsoR]\fR" 4 -.IX Item "-w[liaprmfFsoR]" -.PD 0 -.IP "\fB\-\-debug\-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]\fR" 4 -.IX Item "--debug-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]" -.PD -Displays the contents of the debug sections in the file, if any are -present. If one of the optional letters or words follows the switch -then only data found in those specific sections will be dumped. -.IP "\fB\-I\fR" 4 -.IX Item "-I" -.PD 0 -.IP "\fB\-\-histogram\fR" 4 -.IX Item "--histogram" -.PD -Display a histogram of bucket list lengths when displaying the contents -of the symbol tables. -.IP "\fB\-v\fR" 4 -.IX Item "-v" -.PD 0 -.IP "\fB\-\-version\fR" 4 -.IX Item "--version" -.PD -Display the version number of readelf. -.IP "\fB\-W\fR" 4 -.IX Item "-W" -.PD 0 -.IP "\fB\-\-wide\fR" 4 -.IX Item "--wide" -.PD -Don't break output lines to fit into 80 columns. By default -\&\fBreadelf\fR breaks section header and segment listing lines for -64\-bit \s-1ELF\s0 files, so that they fit into 80 columns. This option causes -\&\fBreadelf\fR to print each section header resp. each segment one a -single line, which is far more readable on terminals wider than 80 columns. -.IP "\fB\-H\fR" 4 -.IX Item "-H" -.PD 0 -.IP "\fB\-\-help\fR" 4 -.IX Item "--help" -.PD -Display the command line options understood by \fBreadelf\fR. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -\&\fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/binutils/size/Makefile =================================================================== --- head/gnu/usr.bin/binutils/size/Makefile +++ head/gnu/usr.bin/binutils/size/Makefile @@ -1,17 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -PROG= size -SRCS= size.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -CFLAGS+= -I${SRCDIR}/binutils -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} - -.include Index: head/gnu/usr.bin/binutils/size/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/size/Makefile.depend +++ head/gnu/usr.bin/binutils/size/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/size/size.1 =================================================================== --- head/gnu/usr.bin/binutils/size/size.1 +++ head/gnu/usr.bin/binutils/size/size.1 @@ -1,263 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "SIZE 1" -.TH SIZE 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -size \- list section sizes and total size -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -size [\fB\-A\fR|\fB\-B\fR|\fB\-\-format=\fR\fIcompatibility\fR] - [\fB\-\-help\fR] - [\fB\-d\fR|\fB\-o\fR|\fB\-x\fR|\fB\-\-radix=\fR\fInumber\fR] - [\fB\-t\fR|\fB\-\-totals\fR] - [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-V\fR|\fB\-\-version\fR] - [\fIobjfile\fR...] -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -The \s-1GNU\s0 \fBsize\fR utility lists the section sizes\-\-\-and the total -size\-\-\-for each of the object or archive files \fIobjfile\fR in its -argument list. By default, one line of output is generated for each -object file or each module in an archive. -.PP -\&\fIobjfile\fR... are the object files to be examined. -If none are specified, the file \f(CW\*(C`a.out\*(C'\fR will be used. -.SH "OPTIONS" -.IX Header "OPTIONS" -The command line options have the following meanings: -.IP "\fB\-A\fR" 4 -.IX Item "-A" -.PD 0 -.IP "\fB\-B\fR" 4 -.IX Item "-B" -.IP "\fB\-\-format=\fR\fIcompatibility\fR" 4 -.IX Item "--format=compatibility" -.PD -Using one of these options, you can choose whether the output from \s-1GNU\s0 -\&\fBsize\fR resembles output from System V \fBsize\fR (using \fB\-A\fR, -or \fB\-\-format=sysv\fR), or Berkeley \fBsize\fR (using \fB\-B\fR, or -\&\fB\-\-format=berkeley\fR). The default is the one-line format similar to -Berkeley's. -.Sp -Here is an example of the Berkeley (default) format of output from -\&\fBsize\fR: -.Sp -.Vb 4 -\& $ size \-\-format=Berkeley ranlib size -\& text data bss dec hex filename -\& 294880 81920 11592 388392 5ed28 ranlib -\& 294880 81920 11888 388688 5ee50 size -.Ve -.Sp -This is the same data, but displayed closer to System V conventions: -.Sp -.Vb 7 -\& $ size \-\-format=SysV ranlib size -\& ranlib : -\& section size addr -\& .text 294880 8192 -\& .data 81920 303104 -\& .bss 11592 385024 -\& Total 388392 -\& -\& -\& size : -\& section size addr -\& .text 294880 8192 -\& .data 81920 303104 -\& .bss 11888 385024 -\& Total 388688 -.Ve -.IP "\fB\-\-help\fR" 4 -.IX Item "--help" -Show a summary of acceptable arguments and options. -.IP "\fB\-d\fR" 4 -.IX Item "-d" -.PD 0 -.IP "\fB\-o\fR" 4 -.IX Item "-o" -.IP "\fB\-x\fR" 4 -.IX Item "-x" -.IP "\fB\-\-radix=\fR\fInumber\fR" 4 -.IX Item "--radix=number" -.PD -Using one of these options, you can control whether the size of each -section is given in decimal (\fB\-d\fR, or \fB\-\-radix=10\fR); octal -(\fB\-o\fR, or \fB\-\-radix=8\fR); or hexadecimal (\fB\-x\fR, or -\&\fB\-\-radix=16\fR). In \fB\-\-radix=\fR\fInumber\fR, only the three -values (8, 10, 16) are supported. The total size is always given in two -radices; decimal and hexadecimal for \fB\-d\fR or \fB\-x\fR output, or -octal and hexadecimal if you're using \fB\-o\fR. -.IP "\fB\-t\fR" 4 -.IX Item "-t" -.PD 0 -.IP "\fB\-\-totals\fR" 4 -.IX Item "--totals" -.PD -Show totals of all objects listed (Berkeley format listing mode only). -.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 -.IX Item "--target=bfdname" -Specify that the object-code format for \fIobjfile\fR is -\&\fIbfdname\fR. This option may not be necessary; \fBsize\fR can -automatically recognize many formats. -.IP "\fB\-V\fR" 4 -.IX Item "-V" -.PD 0 -.IP "\fB\-\-version\fR" 4 -.IX Item "--version" -.PD -Display the version number of \fBsize\fR. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/binutils/strings/Makefile =================================================================== --- head/gnu/usr.bin/binutils/strings/Makefile +++ head/gnu/usr.bin/binutils/strings/Makefile @@ -1,17 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -PROG= strings -SRCS= strings.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -CFLAGS+= -I${SRCDIR}/binutils -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} - -.include Index: head/gnu/usr.bin/binutils/strings/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/strings/Makefile.depend +++ head/gnu/usr.bin/binutils/strings/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/strings/strings.1 =================================================================== --- head/gnu/usr.bin/binutils/strings/strings.1 +++ head/gnu/usr.bin/binutils/strings/strings.1 @@ -1,254 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "STRINGS 1" -.TH STRINGS 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -strings \- print the strings of printable characters in files. -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -strings [\fB\-afov\fR] [\fB\-\fR\fImin-len\fR] - [\fB\-n\fR \fImin-len\fR] [\fB\-\-bytes=\fR\fImin-len\fR] - [\fB\-t\fR \fIradix\fR] [\fB\-\-radix=\fR\fIradix\fR] - [\fB\-e\fR \fIencoding\fR] [\fB\-\-encoding=\fR\fIencoding\fR] - [\fB\-\fR] [\fB\-\-all\fR] [\fB\-\-print\-file\-name\fR] - [\fB\-T\fR \fIbfdname\fR] [\fB\-\-target=\fR\fIbfdname\fR] - [\fB\-\-help\fR] [\fB\-\-version\fR] \fIfile\fR... -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -For each \fIfile\fR given, \s-1GNU\s0 \fBstrings\fR prints the printable -character sequences that are at least 4 characters long (or the number -given with the options below) and are followed by an unprintable -character. By default, it only prints the strings from the initialized -and loaded sections of object files; for other types of files, it prints -the strings from the whole file. -.PP -\&\fBstrings\fR is mainly useful for determining the contents of non-text -files. -.SH "OPTIONS" -.IX Header "OPTIONS" -.IP "\fB\-a\fR" 4 -.IX Item "-a" -.PD 0 -.IP "\fB\-\-all\fR" 4 -.IX Item "--all" -.IP "\fB\-\fR" 4 -.IX Item "-" -.PD -Do not scan only the initialized and loaded sections of object files; -scan the whole files. -.IP "\fB\-f\fR" 4 -.IX Item "-f" -.PD 0 -.IP "\fB\-\-print\-file\-name\fR" 4 -.IX Item "--print-file-name" -.PD -Print the name of the file before each string. -.IP "\fB\-\-help\fR" 4 -.IX Item "--help" -Print a summary of the program usage on the standard output and exit. -.IP "\fB\-\fR\fImin-len\fR" 4 -.IX Item "-min-len" -.PD 0 -.IP "\fB\-n\fR \fImin-len\fR" 4 -.IX Item "-n min-len" -.IP "\fB\-\-bytes=\fR\fImin-len\fR" 4 -.IX Item "--bytes=min-len" -.PD -Print sequences of characters that are at least \fImin-len\fR characters -long, instead of the default 4. -.IP "\fB\-o\fR" 4 -.IX Item "-o" -Like \fB\-t o\fR. Some other versions of \fBstrings\fR have \fB\-o\fR -act like \fB\-t d\fR instead. Since we can not be compatible with both -ways, we simply chose one. -.IP "\fB\-t\fR \fIradix\fR" 4 -.IX Item "-t radix" -.PD 0 -.IP "\fB\-\-radix=\fR\fIradix\fR" 4 -.IX Item "--radix=radix" -.PD -Print the offset within the file before each string. The single -character argument specifies the radix of the offset\-\-\-\fBo\fR for -octal, \fBx\fR for hexadecimal, or \fBd\fR for decimal. -.IP "\fB\-e\fR \fIencoding\fR" 4 -.IX Item "-e encoding" -.PD 0 -.IP "\fB\-\-encoding=\fR\fIencoding\fR" 4 -.IX Item "--encoding=encoding" -.PD -Select the character encoding of the strings that are to be found. -Possible values for \fIencoding\fR are: \fBs\fR = single\-7\-bit\-byte -characters (\s-1ASCII\s0, \s-1ISO\s0 8859, etc., default), \fBS\fR = -single\-8\-bit\-byte characters, \fBb\fR = 16\-bit bigendian, \fBl\fR = -16\-bit littleendian, \fBB\fR = 32\-bit bigendian, \fBL\fR = 32\-bit -littleendian. Useful for finding wide character strings. -.IP "\fB\-T\fR \fIbfdname\fR" 4 -.IX Item "-T bfdname" -.PD 0 -.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 -.IX Item "--target=bfdname" -.PD -Specify an object code format other than your system's default format. -.IP "\fB\-v\fR" 4 -.IX Item "-v" -.PD 0 -.IP "\fB\-\-version\fR" 4 -.IX Item "--version" -.PD -Print the program version number on the standard output and exit. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -\&\fIar\fR\|(1), \fInm\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), \fIreadelf\fR\|(1) -and the Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/binutils/strip/Makefile =================================================================== --- head/gnu/usr.bin/binutils/strip/Makefile +++ head/gnu/usr.bin/binutils/strip/Makefile @@ -1,18 +0,0 @@ -# $FreeBSD$ - -.include "../Makefile.inc0" - -.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc - -PROG= strip -SRCS= objcopy.c is-strip.c -CFLAGS+= -D_GNU_SOURCE -CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -CFLAGS+= -I${SRCDIR}/binutils -I${SRCDIR}/bfd -DPADD= ${RELTOP}/libbinutils/libbinutils.a -DPADD+= ${RELTOP}/libbfd/libbfd.a -DPADD+= ${RELTOP}/libiberty/libiberty.a -LDADD= ${DPADD} -INSTALLFLAGS= -S - -.include Index: head/gnu/usr.bin/binutils/strip/Makefile.depend =================================================================== --- head/gnu/usr.bin/binutils/strip/Makefile.depend +++ head/gnu/usr.bin/binutils/strip/Makefile.depend @@ -1,21 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/binutils/libbfd \ - gnu/usr.bin/binutils/libbinutils \ - gnu/usr.bin/binutils/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/gnu/usr.bin/binutils/strip/strip.1 =================================================================== --- head/gnu/usr.bin/binutils/strip/strip.1 +++ head/gnu/usr.bin/binutils/strip/strip.1 @@ -1,392 +0,0 @@ -.\" $FreeBSD$ -.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14) -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. \*(C+ will -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, -.\" nothing in troff, for use with C<>. -.tr \(*W- -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" Escape single quotes in literal strings from groff's Unicode transform. -.ie \n(.g .ds Aq \(aq -.el .ds Aq ' -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.ie \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.el \{\ -. de IX -.. -.\} -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "STRIP 1" -.TH STRIP 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.if n .ad l -.nh -.SH "NAME" -strip \- Discard symbols from object files -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -strip [\fB\-F\fR \fIbfdname\fR |\fB\-\-target=\fR\fIbfdname\fR] - [\fB\-I\fR \fIbfdname\fR |\fB\-\-input\-target=\fR\fIbfdname\fR] - [\fB\-O\fR \fIbfdname\fR |\fB\-\-output\-target=\fR\fIbfdname\fR] - [\fB\-s\fR|\fB\-\-strip\-all\fR] - [\fB\-S\fR|\fB\-g\fR|\fB\-d\fR|\fB\-\-strip\-debug\fR] - [\fB\-K\fR \fIsymbolname\fR |\fB\-\-keep\-symbol=\fR\fIsymbolname\fR] - [\fB\-N\fR \fIsymbolname\fR |\fB\-\-strip\-symbol=\fR\fIsymbolname\fR] - [\fB\-w\fR|\fB\-\-wildcard\fR] - [\fB\-x\fR|\fB\-\-discard\-all\fR] [\fB\-X\fR |\fB\-\-discard\-locals\fR] - [\fB\-R\fR \fIsectionname\fR |\fB\-\-remove\-section=\fR\fIsectionname\fR] - [\fB\-o\fR \fIfile\fR] [\fB\-p\fR|\fB\-\-preserve\-dates\fR] - [\fB\-\-keep\-file\-symbols\fR] - [\fB\-\-only\-keep\-debug\fR] - [\fB\-v\fR |\fB\-\-verbose\fR] [\fB\-V\fR|\fB\-\-version\fR] - [\fB\-\-help\fR] [\fB\-\-info\fR] - \fIobjfile\fR... -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -\&\s-1GNU\s0 \fBstrip\fR discards all symbols from object files -\&\fIobjfile\fR. The list of object files may include archives. -At least one object file must be given. -.PP -\&\fBstrip\fR modifies the files named in its argument, -rather than writing modified copies under different names. -.SH "OPTIONS" -.IX Header "OPTIONS" -.IP "\fB\-F\fR \fIbfdname\fR" 4 -.IX Item "-F bfdname" -.PD 0 -.IP "\fB\-\-target=\fR\fIbfdname\fR" 4 -.IX Item "--target=bfdname" -.PD -Treat the original \fIobjfile\fR as a file with the object -code format \fIbfdname\fR, and rewrite it in the same format. -.IP "\fB\-\-help\fR" 4 -.IX Item "--help" -Show a summary of the options to \fBstrip\fR and exit. -.IP "\fB\-\-info\fR" 4 -.IX Item "--info" -Display a list showing all architectures and object formats available. -.IP "\fB\-I\fR \fIbfdname\fR" 4 -.IX Item "-I bfdname" -.PD 0 -.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4 -.IX Item "--input-target=bfdname" -.PD -Treat the original \fIobjfile\fR as a file with the object -code format \fIbfdname\fR. -.IP "\fB\-O\fR \fIbfdname\fR" 4 -.IX Item "-O bfdname" -.PD 0 -.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4 -.IX Item "--output-target=bfdname" -.PD -Replace \fIobjfile\fR with a file in the output format \fIbfdname\fR. -.IP "\fB\-R\fR \fIsectionname\fR" 4 -.IX Item "-R sectionname" -.PD 0 -.IP "\fB\-\-remove\-section=\fR\fIsectionname\fR" 4 -.IX Item "--remove-section=sectionname" -.PD -Remove any section named \fIsectionname\fR from the output file. This -option may be given more than once. Note that using this option -inappropriately may make the output file unusable. -.IP "\fB\-s\fR" 4 -.IX Item "-s" -.PD 0 -.IP "\fB\-\-strip\-all\fR" 4 -.IX Item "--strip-all" -.PD -Remove all symbols. -.IP "\fB\-g\fR" 4 -.IX Item "-g" -.PD 0 -.IP "\fB\-S\fR" 4 -.IX Item "-S" -.IP "\fB\-d\fR" 4 -.IX Item "-d" -.IP "\fB\-\-strip\-debug\fR" 4 -.IX Item "--strip-debug" -.PD -Remove debugging symbols only. -.IP "\fB\-\-strip\-unneeded\fR" 4 -.IX Item "--strip-unneeded" -Remove all symbols that are not needed for relocation processing. -.IP "\fB\-K\fR \fIsymbolname\fR" 4 -.IX Item "-K symbolname" -.PD 0 -.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4 -.IX Item "--keep-symbol=symbolname" -.PD -When stripping symbols, keep symbol \fIsymbolname\fR even if it would -normally be stripped. This option may be given more than once. -.IP "\fB\-N\fR \fIsymbolname\fR" 4 -.IX Item "-N symbolname" -.PD 0 -.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4 -.IX Item "--strip-symbol=symbolname" -.PD -Remove symbol \fIsymbolname\fR from the source file. This option may be -given more than once, and may be combined with strip options other than -\&\fB\-K\fR. -.IP "\fB\-o\fR \fIfile\fR" 4 -.IX Item "-o file" -Put the stripped output in \fIfile\fR, rather than replacing the -existing file. When this argument is used, only one \fIobjfile\fR -argument may be specified. -.IP "\fB\-p\fR" 4 -.IX Item "-p" -.PD 0 -.IP "\fB\-\-preserve\-dates\fR" 4 -.IX Item "--preserve-dates" -.PD -Preserve the access and modification dates of the file. -.IP "\fB\-w\fR" 4 -.IX Item "-w" -.PD 0 -.IP "\fB\-\-wildcard\fR" 4 -.IX Item "--wildcard" -.PD -Permit regular expressions in \fIsymbolname\fRs used in other command -line options. The question mark (?), asterisk (*), backslash (\e) and -square brackets ([]) operators can be used anywhere in the symbol -name. If the first character of the symbol name is the exclamation -point (!) then the sense of the switch is reversed for that symbol. -For example: -.Sp -.Vb 1 -\& \-w \-K !foo \-K fo* -.Ve -.Sp -would cause strip to only keep symbols that start with the letters -\&\*(L"fo\*(R", but to discard the symbol \*(L"foo\*(R". -.IP "\fB\-x\fR" 4 -.IX Item "-x" -.PD 0 -.IP "\fB\-\-discard\-all\fR" 4 -.IX Item "--discard-all" -.PD -Remove non-global symbols. -.IP "\fB\-X\fR" 4 -.IX Item "-X" -.PD 0 -.IP "\fB\-\-discard\-locals\fR" 4 -.IX Item "--discard-locals" -.PD -Remove compiler-generated local symbols. -(These usually start with \fBL\fR or \fB.\fR.) -.IP "\fB\-\-keep\-file\-symbols\fR" 4 -.IX Item "--keep-file-symbols" -When stripping a file, perhaps with \fB\-\-strip\-debug\fR or -\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names, -which would otherwise get stripped. -.IP "\fB\-\-only\-keep\-debug\fR" 4 -.IX Item "--only-keep-debug" -Strip a file, removing contents of any sections that would not be -stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections -intact. In \s-1ELF\s0 files, this preserves all note sections in the output. -.Sp -The intention is that this option will be used in conjunction with -\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable. One a -stripped binary which will occupy less space in \s-1RAM\s0 and in a -distribution and the second a debugging information file which is only -needed if debugging abilities are required. The suggested procedure -to create these files is as follows: -.RS 4 -.IP "1." 4 -.IX Item "1." -\&\f(CW\*(C`foo\*(C'\fR then... -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -create a file containing the debugging info. -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -stripped executable. -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -to add a link to the debugging info into the stripped executable. -.RE -.RS 4 -.Sp -Note \- the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info -file is arbitrary. Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is -optional. You could instead do this: -.IP "1." 4 -.IX Item "1." -.PD 0 -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -.ie n .IP "1." 4 -.el .IP "1." 4 -.IX Item "1." -.RE -.RS 4 -.PD -.Sp -ie the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the -full executable. It does not have to be a file created by the -\&\fB\-\-only\-keep\-debug\fR switch. -.Sp -Note \- this switch is only intended for use on fully linked files. It -does not make sense to use it on object files where the debugging -information may be incomplete. Besides the gnu_debuglink feature -currently only supports the presence of one filename containing -debugging information, not multiple filenames on a one-per-object-file -basis. -.RE -.IP "\fB\-V\fR" 4 -.IX Item "-V" -.PD 0 -.IP "\fB\-\-version\fR" 4 -.IX Item "--version" -.PD -Show the version number for \fBstrip\fR. -.IP "\fB\-v\fR" 4 -.IX Item "-v" -.PD 0 -.IP "\fB\-\-verbose\fR" 4 -.IX Item "--verbose" -.PD -Verbose output: list all object files modified. In the case of -archives, \fBstrip \-v\fR lists all members of the archive. -.IP "\fB@\fR\fIfile\fR" 4 -.IX Item "@file" -Read command-line options from \fIfile\fR. The options read are -inserted in place of the original @\fIfile\fR option. If \fIfile\fR -does not exist, or cannot be read, then the option will be treated -literally, and not removed. -.Sp -Options in \fIfile\fR are separated by whitespace. A whitespace -character may be included in an option by surrounding the entire -option in either single or double quotes. Any character (including a -backslash) may be included by prefixing the character to be included -with a backslash. The \fIfile\fR may itself contain additional -@\fIfile\fR options; any such options will be processed recursively. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -the Info entries for \fIbinutils\fR. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -.PP -Permission is granted to copy, distribute and/or modify this document -under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 -or any later version published by the Free Software Foundation; -with no Invariant Sections, with no Front-Cover Texts, and with no -Back-Cover Texts. A copy of the license is included in the -section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R". Index: head/gnu/usr.bin/cc/Makefile =================================================================== --- head/gnu/usr.bin/cc/Makefile +++ head/gnu/usr.bin/cc/Makefile @@ -13,9 +13,6 @@ .if ${MK_CXX} != "no" SUBDIR+= cc1plus c++ -.if ${MK_ELFTOOLCHAIN_TOOLS} == "no" -SUBDIR+= c++filt -.endif .endif .if ${MK_GCOV} != "no" Index: head/gnu/usr.bin/cc/c++filt/Makefile =================================================================== --- head/gnu/usr.bin/cc/c++filt/Makefile +++ head/gnu/usr.bin/cc/c++filt/Makefile @@ -1,19 +0,0 @@ -# $FreeBSD$ - -MAN= -.include - -.include "../Makefile.inc" -.include "../Makefile.fe" - -.PATH: ${GCCLIB}/libiberty - -PROG= c++filt -SRCS= cp-demangle.c - -CFLAGS+= -DSTANDALONE_DEMANGLER -DVERSION=\"$(GCC_VERSION)\" - -DPADD= ${LIBIBERTY} -LDADD= ${LIBIBERTY} - -.include Index: head/gnu/usr.bin/cc/c++filt/Makefile.depend =================================================================== --- head/gnu/usr.bin/cc/c++filt/Makefile.depend +++ head/gnu/usr.bin/cc/c++filt/Makefile.depend @@ -1,23 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,} - -DIRDEPS = \ - gnu/lib/csu \ - gnu/lib/libgcc \ - gnu/usr.bin/cc/cc_tools \ - gnu/usr.bin/cc/libiberty \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - lib/libc_nonshared \ - lib/libcompiler_rt \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif Index: head/tools/build/mk/OptionalObsoleteFiles.inc =================================================================== --- head/tools/build/mk/OptionalObsoleteFiles.inc +++ head/tools/build/mk/OptionalObsoleteFiles.inc @@ -1025,9 +1025,6 @@ .if ${MK_CXX} == no OLD_FILES+=usr/bin/CC OLD_FILES+=usr/bin/c++ -.if ${MK_ELFTOOLCHAIN_TOOLS} == no -OLD_FILES+=usr/bin/c++filt -.endif OLD_FILES+=usr/bin/g++ OLD_FILES+=usr/libexec/cc1plus .endif @@ -1656,14 +1653,16 @@ OLD_FILES+=usr/share/man/man1/elfcopy.1.gz .endif -.if ${MK_ELFTOOLCHAIN_TOOLS} == no && ${MK_BINUTILS} == no +.if ${MK_ELFTOOLCHAIN_TOOLS} == no OLD_FILES+=usr/bin/addr2line +OLD_FILES+=usr/bin/c++filt OLD_FILES+=usr/bin/nm OLD_FILES+=usr/bin/readelf OLD_FILES+=usr/bin/size OLD_FILES+=usr/bin/strings OLD_FILES+=usr/bin/strip OLD_FILES+=usr/share/man/man1/addr2line.1.gz +OLD_FILES+=usr/share/man/man1/c++filt.1.gz OLD_FILES+=usr/share/man/man1/nm.1.gz OLD_FILES+=usr/share/man/man1/readelf.1.gz OLD_FILES+=usr/share/man/man1/size.1.gz @@ -1753,9 +1752,6 @@ .endif .if ${MK_GCC} == no -.if ${MK_ELFTOOLCHAIN_TOOLS} == no -OLD_FILES+=usr/bin/c++filt -.endif OLD_FILES+=usr/bin/g++ OLD_FILES+=usr/bin/gcc OLD_FILES+=usr/bin/gcov Index: head/tools/build/options/WITHOUT_BINUTILS =================================================================== --- head/tools/build/options/WITHOUT_BINUTILS +++ head/tools/build/options/WITHOUT_BINUTILS @@ -1,5 +1,4 @@ .\" $FreeBSD$ -Set to not build or install binutils (as, c++-filt, -ld, nm, objcopy, objdump, readelf, size and strip) as part +Set to not build or install binutils (as, ld, objcopy, and objdump ) as part of the normal system build. The resulting system cannot build programs from source. Index: head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS =================================================================== --- head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS +++ head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS @@ -1,5 +1,5 @@ .\" $FreeBSD$ -Set to use +Set to avoid building ELF Tool Chain tools .Xr addr2line 1 , .Xr c++filt 1 , .Xr nm 1 , @@ -7,5 +7,4 @@ .Xr size 1 , .Xr strings 1 , and -.Xr strip 1 -from GNU binutils instead of the ELF Tool Chain project. +.Xr strip 1 .