diff --git a/sbin/init/Makefile b/sbin/init/Makefile --- a/sbin/init/Makefile +++ b/sbin/init/Makefile @@ -12,15 +12,7 @@ LIBADD= util crypt CONFTTYSNAME= ttys -.if exists(${.CURDIR}/ttys.${MACHINE}) -CONFTTYS+= ttys.${MACHINE} -.elif exists(${.CURDIR}/ttys.${MACHINE_ARCH}) -CONFTTYS+= ttys.${MACHINE_ARCH} -.elif exists(${.CURDIR}/ttys.${MACHINE_CPUARCH}) -CONFTTYS+= ttys.${MACHINE_CPUARCH} -.else -.error MACHINE.ttys missing -.endif +CONFTTYS+= ttys # Needed for getmntopts.c MOUNT= ${SRCTOP}/sbin/mount diff --git a/sbin/init/ttys.riscv b/sbin/init/ttys rename from sbin/init/ttys.riscv rename to sbin/init/ttys --- a/sbin/init/ttys.riscv +++ b/sbin/init/ttys @@ -38,7 +38,7 @@ ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm onifexists secure +ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure diff --git a/sbin/init/ttys.aarch64 b/sbin/init/ttys.aarch64 deleted file mode 100644 --- a/sbin/init/ttys.aarch64 +++ /dev/null @@ -1,49 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# -ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm onifexists secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure -# Dumb console -dcons "/usr/libexec/getty std.9600" vt100 off secure diff --git a/sbin/init/ttys.amd64 b/sbin/init/ttys.amd64 deleted file mode 100644 --- a/sbin/init/ttys.amd64 +++ /dev/null @@ -1,49 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# -ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure -# Dumb console -dcons "/usr/libexec/getty std.9600" vt100 off secure diff --git a/sbin/init/ttys.arm b/sbin/init/ttys.arm deleted file mode 100644 --- a/sbin/init/ttys.arm +++ /dev/null @@ -1,49 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# -ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure -# Dumb console -dcons "/usr/libexec/getty std.9600" vt100 off secure diff --git a/sbin/init/ttys.i386 b/sbin/init/ttys.i386 deleted file mode 100644 --- a/sbin/init/ttys.i386 +++ /dev/null @@ -1,49 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# -ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure -# Dumb console -dcons "/usr/libexec/getty std.9600" vt100 off secure diff --git a/sbin/init/ttys.mips b/sbin/init/ttys.mips deleted file mode 100644 --- a/sbin/init/ttys.mips +++ /dev/null @@ -1,36 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure diff --git a/sbin/init/ttys.powerpc b/sbin/init/ttys.powerpc deleted file mode 100644 --- a/sbin/init/ttys.powerpc +++ /dev/null @@ -1,49 +0,0 @@ -# -# $FreeBSD$ -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# This file specifies various information about terminals on the system. -# It is used by several different programs. Common entries for the -# various columns include: -# -# name The name of the terminal device. -# -# getty The program to start running on the terminal. Typically a -# getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm, to start the -# X Window System. -# -# type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically xterm. -# Other common values include dialup for incoming modem ports, and -# unknown when the terminal type cannot be predetermined. -# -# status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. -# -# name getty type status comments -# -# If console is marked "insecure", then init will ask for the root password -# when going to single-user mode. -console none unknown off secure -# -ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure -ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure -#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure -# Serial terminals -# The 'dialup' keyword identifies dialin lines to login, fingerd etc. -ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure -ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure -# Dumb console -dcons "/usr/libexec/getty std.9600" vt100 off secure