Index: head/sys/dev/e1000/e1000_api.c
===================================================================
--- head/sys/dev/e1000/e1000_api.c
+++ head/sys/dev/e1000/e1000_api.c
@@ -309,6 +309,8 @@
 	case E1000_DEV_ID_PCH_SPT_I219_V4:
 	case E1000_DEV_ID_PCH_SPT_I219_LM5:
 	case E1000_DEV_ID_PCH_SPT_I219_V5:
+	case E1000_DEV_ID_PCH_CMP_I219_LM12:
+	case E1000_DEV_ID_PCH_CMP_I219_V12:
 		mac->type = e1000_pch_spt;
 		break;
 	case E1000_DEV_ID_PCH_CNP_I219_LM6:
@@ -319,7 +321,10 @@
 	case E1000_DEV_ID_PCH_ICP_I219_V8:
 	case E1000_DEV_ID_PCH_ICP_I219_LM9:
 	case E1000_DEV_ID_PCH_ICP_I219_V9:
-	case E1000_DEV_ID_PCH_ICP_I219_V10:
+	case E1000_DEV_ID_PCH_CMP_I219_LM10:
+	case E1000_DEV_ID_PCH_CMP_I219_V10:
+	case E1000_DEV_ID_PCH_CMP_I219_LM11:
+	case E1000_DEV_ID_PCH_CMP_I219_V11:
 		mac->type = e1000_pch_cnp;
 		break;
 	case E1000_DEV_ID_82575EB_COPPER:
Index: head/sys/dev/e1000/e1000_hw.h
===================================================================
--- head/sys/dev/e1000/e1000_hw.h
+++ head/sys/dev/e1000/e1000_hw.h
@@ -155,7 +155,12 @@
 #define E1000_DEV_ID_PCH_ICP_I219_V8		0x15E0
 #define E1000_DEV_ID_PCH_ICP_I219_LM9		0x15E1
 #define E1000_DEV_ID_PCH_ICP_I219_V9		0x15E2
-#define E1000_DEV_ID_PCH_ICP_I219_V10		0x0D4F
+#define E1000_DEV_ID_PCH_CMP_I219_LM10		0x0D4E
+#define E1000_DEV_ID_PCH_CMP_I219_V10		0x0D4F
+#define E1000_DEV_ID_PCH_CMP_I219_LM11		0x0D4C
+#define E1000_DEV_ID_PCH_CMP_I219_V11		0x0D4D
+#define E1000_DEV_ID_PCH_CMP_I219_LM12		0x0D53
+#define E1000_DEV_ID_PCH_CMP_I219_V12		0x0D55
 #define E1000_DEV_ID_82576			0x10C9
 #define E1000_DEV_ID_82576_FIBER		0x10E6
 #define E1000_DEV_ID_82576_SERDES		0x10E7
Index: head/sys/dev/e1000/e1000_i210.c
===================================================================
--- head/sys/dev/e1000/e1000_i210.c
+++ head/sys/dev/e1000/e1000_i210.c
@@ -774,6 +774,7 @@
  **/
 s32 e1000_init_hw_i210(struct e1000_hw *hw)
 {
+	struct e1000_mac_info *mac = &hw->mac;
 	s32 ret_val;
 
 	DEBUGFUNC("e1000_init_hw_i210");
@@ -784,6 +785,10 @@
 			return ret_val;
 	}
 	hw->phy.ops.get_cfg_done = e1000_get_cfg_done_i210;
+
+	/* Initialize identification LED */
+	mac->ops.id_led_init(hw);
+
 	ret_val = e1000_init_hw_82575(hw);
 	return ret_val;
 }
Index: head/sys/dev/e1000/e1000_ich8lan.c
===================================================================
--- head/sys/dev/e1000/e1000_ich8lan.c
+++ head/sys/dev/e1000/e1000_ich8lan.c
@@ -1091,7 +1091,7 @@
 	value = ltr & E1000_LTRV_VALUE_MASK;
 	scale = (ltr & E1000_LTRV_SCALE_MASK) >> E1000_LTRV_SCALE_SHIFT;
 
-	return value * (1 << (scale * E1000_LTRV_SCALE_FACTOR));
+	return value * (1ULL << (scale * E1000_LTRV_SCALE_FACTOR));
 }
 
 /**
@@ -4161,13 +4161,6 @@
 	if (ret_val)
 		goto release;
 
-	/* And invalidate the previously valid segment by setting
-	 * its signature word (0x13) high_byte to 0b. This can be
-	 * done without an erase because flash erase sets all bits
-	 * to 1's. We can write 1's to 0's without an erase
-	 */
-	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
-
 	/* offset in words but we read dword*/
 	act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1;
 	ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword);
@@ -5235,9 +5228,6 @@
 
 	DEBUGFUNC("e1000_setup_link_ich8lan");
 
-	if (hw->phy.ops.check_reset_block(hw))
-		return E1000_SUCCESS;
-
 	/* ICH parts do not have a word in the NVM to determine
 	 * the default flow control setting, so we explicitly
 	 * set it to full.
@@ -5253,10 +5243,12 @@
 	DEBUGOUT1("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
-	/* Continue to configure the copper link. */
-	ret_val = hw->mac.ops.setup_physical_interface(hw);
-	if (ret_val)
-		return ret_val;
+	if (!hw->phy.ops.check_reset_block(hw)) {
+		/* Continue to configure the copper link. */
+		ret_val = hw->mac.ops.setup_physical_interface(hw);
+		if (ret_val)
+			return ret_val;
+	}
 
 	E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time);
 	if ((hw->phy.type == e1000_phy_82578) ||
Index: head/sys/dev/e1000/if_em.c
===================================================================
--- head/sys/dev/e1000/if_em.c
+++ head/sys/dev/e1000/if_em.c
@@ -174,7 +174,12 @@
 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_V8, "Intel(R) PRO/1000 Network Connection"),
 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_LM9, "Intel(R) PRO/1000 Network Connection"),
 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_V9, "Intel(R) PRO/1000 Network Connection"),
-	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_V10, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM10, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V10, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM11, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V11, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM12, "Intel(R) PRO/1000 Network Connection"),
+	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V12, "Intel(R) PRO/1000 Network Connection"),
 	/* required last entry */
 	PVID_END
 };