Index: head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
===================================================================
--- head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
+++ head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
@@ -1086,14 +1086,16 @@
Installing from the Network
- The menu shown in only appears when
- installing from a -bootonly.iso
- CD as this installation media does not hold
- copies of the installation files. Since the installation
- files must be retrieved over a network connection, this menu
- indicates that the network interface must be first
- configured.
+ The menu shown in
+ only appears
+ when installing from a -bootonly.iso or
+ -mini-memstick.img as this installation
+ media does not hold copies of the installation files.
+ Since the installation files must be retrieved over a network
+ connection, this menu indicates that the network interface must
+ be configured first. If this menu is shown in any step of the
+ process remember to follow the instructions in
+ .
-
- To configure the network connection, press
- Enter and follow the instructions in . Once the
- interface is configured, select a mirror site that is
- located in the same region of the world as the computer on
- which &os; is being installed. Files can be retrieved more
- quickly when the mirror is close to the target computer,
- reducing installation time.
-
-
-
- Installation will then continue as if the installation
- files were located on the local installation media.
@@ -1943,7 +1922,7 @@
-
+
-
- Configuring Network Interfaces
-
- Next, a list of the network interfaces found on the
- computer is shown. Select the interface to configure.
-
-
- The network configuration menus will be skipped if the
- network was previously configured as part of a
- bootonly installation.
-
-
-
-
- If an Ethernet interface is selected, the installer will
- skip ahead to the menu shown in . If a wireless
- network interface is chosen, the system will instead scan for
- wireless access points:
-
-
-
- Wireless networks are identified by a Service Set
- Identifier (SSID), a short, unique name
- given to each network. SSIDs found during
- the scan are listed, followed by a description of the
- encryption types available for that network. If the desired
- SSID does not appear in the list, select
- [ Rescan ] to scan again. If
- the desired network still does not appear, check for problems
- with antenna connections or try moving the computer closer to
- the access point. Rescan after each change is made.
-
-
-
- Next, enter the encryption information for connecting to
- the selected wireless network. WPA2
- encryption is strongly recommended as older encryption types,
- like WEP, offer little security. If the
- network uses WPA2, input the password, also
- known as the Pre-Shared Key (PSK). For
- security reasons, the characters typed into the input box are
- displayed as asterisks.
-
-
-
- Next, choose whether or not an IPv4
- address should be configured on the Ethernet or wireless
- interface:
-
-
-
- There are two methods of IPv4
- configuration. DHCP will automatically
- configure the network interface correctly and should be used
- if the network provides a DHCP server.
- Otherwise, the addressing information needs to be input
- manually as a static configuration.
-
-
- Do not enter random network information as it will not
- work. If a DHCP server is not available,
- obtain the information listed in from
- the network administrator or Internet service
- provider.
-
-
- If a DHCP server is available, select
- [ Yes ] in the next menu to
- automatically configure the network interface. The installer
- will appear to pause for a minute or so as it finds the
- DHCP server and obtains the addressing
- information for the system.
-
-
-
- If a DHCP server is not available,
- select [ No ] and input the
- following addressing information in this menu:
-
-
-
-
-
- IP Address - The
- IPv4 address assigned to this computer.
- The address must be unique and not already in use by
- another piece of equipment on the local network.
-
-
-
- Subnet Mask - The subnet mask for
- the network.
-
-
-
- Default Router - The
- IP address of the network's default
- gateway.
-
-
-
- The next screen will ask if the interface should be
- configured for IPv6. If
- IPv6 is available and desired, choose
- [ Yes ] to select it.
-
-
-
- IPv6 also has two methods of
- configuration. StateLess Address AutoConfiguration
- (SLAAC) will automatically request the
- correct configuration information from a local router. Refer
- to http://tools.ietf.org/html/rfc4862
- for more information. Static configuration requires manual
- entry of network information.
-
- If an IPv6 router is available, select
- [ Yes ] in the next menu to
- automatically configure the network interface. The installer
- will appear to pause for a minute or so as it finds the router
- and obtains the addressing information for the system.
-
-
-
- If an IPv6 router is not available,
- select [ No ] and input the
- following addressing information in this menu:
-
-
-
-
-
- IPv6 Address - The
- IPv6 address assigned to this computer.
- The address must be unique and not already in use by
- another piece of equipment on the local network.
-
-
-
- Default Router - The
- IPv6 address of the network's default
- gateway.
-
-
-
- The last network configuration menu is used to configure
- the Domain Name System (DNS) resolver,
- which converts hostnames to and from network addresses. If
- DHCP or SLAAC was used
- to autoconfigure the network interface, the Resolver
- Configuration values may already be filled in.
- Otherwise, enter the local network's domain name in the
- Search field. DNS #1
- and DNS #2 are the IPv4
- and/or IPv6 addresses of the
- DNS servers. At least one
- DNS server is required.
-
-
-
-
Setting the Time Zone
@@ -2423,8 +2126,8 @@
The appropriate date is selected using the arrow keys
and then pressing
- [ Set Date ]. Otherwise,
- the date selection can be skipped pressing
+ [ Set Date ].
+ Otherwise, the date selection can be skipped by pressing
[ Skip ].
@@ -2519,7 +2222,7 @@
-
+
Enabling Hardening Security Options
@@ -2611,7 +2314,7 @@
secure_console - When this option
- is enabled, the prompt requests the root password when
+ is enabled, the prompt requests the root password when
entering single.
@@ -2972,6 +2675,285 @@
shutdown -p now and the system will shut
down cleanly, and if the hardware supports it, turn itself
off.
+
+
+
+
+ Network Interfaces
+
+
+ Configuring Network Interfaces
+
+ Next, a list of the network interfaces found on the
+ computer is shown. Select the interface to configure.
+
+
+
+ If an Ethernet interface is selected, the installer will
+ skip ahead to the menu shown in . If a wireless
+ network interface is chosen, the system will instead scan for
+ wireless access points:
+
+
+
+ Wireless networks are identified by a Service Set
+ Identifier (SSID), a short, unique name
+ given to each network. SSIDs found during
+ the scan are listed, followed by a description of the
+ encryption types available for that network. If the desired
+ SSID does not appear in the list, select
+ [ Rescan ] to scan again. If
+ the desired network still does not appear, check for problems
+ with antenna connections or try moving the computer closer to
+ the access point. Rescan after each change is made.
+
+
+
+ Next, enter the encryption information for connecting to
+ the selected wireless network. WPA2
+ encryption is strongly recommended as older encryption types,
+ like WEP, offer little security. If the
+ network uses WPA2, input the password, also
+ known as the Pre-Shared Key (PSK). For
+ security reasons, the characters typed into the input box are
+ displayed as asterisks.
+
+
+
+ Next, choose whether or not an IPv4
+ address should be configured on the Ethernet or wireless
+ interface:
+
+
+
+ There are two methods of IPv4
+ configuration. DHCP will automatically
+ configure the network interface correctly and should be used
+ if the network provides a DHCP server.
+ Otherwise, the addressing information needs to be input
+ manually as a static configuration.
+
+
+ Do not enter random network information as it will not
+ work. If a DHCP server is not available,
+ obtain the information listed in from
+ the network administrator or Internet service
+ provider.
+
+
+ If a DHCP server is available, select
+ [ Yes ] in the next menu to
+ automatically configure the network interface. The installer
+ will appear to pause for a minute or so as it finds the
+ DHCP server and obtains the addressing
+ information for the system.
+
+
+
+ If a DHCP server is not available,
+ select [ No ] and input the
+ following addressing information in this menu:
+
+
+
+
+
+ IP Address - The
+ IPv4 address assigned to this computer.
+ The address must be unique and not already in use by
+ another piece of equipment on the local network.
+
+
+
+ Subnet Mask - The subnet mask for
+ the network.
+
+
+
+ Default Router - The
+ IP address of the network's default
+ gateway.
+
+
+
+ The next screen will ask if the interface should be
+ configured for IPv6. If
+ IPv6 is available and desired, choose
+ [ Yes ] to select it.
+
+
+
+ IPv6 also has two methods of
+ configuration. StateLess Address AutoConfiguration
+ (SLAAC) will automatically request the
+ correct configuration information from a local router. Refer
+ to rfc4862
+ for more information. Static configuration requires manual
+ entry of network information.
+
+ If an IPv6 router is available, select
+ [ Yes ] in the next menu to
+ automatically configure the network interface. The installer
+ will appear to pause for a minute or so as it finds the router
+ and obtains the addressing information for the system.
+
+
+
+ If an IPv6 router is not available,
+ select [ No ] and input the
+ following addressing information in this menu:
+
+
+
+
+
+ IPv6 Address - The
+ IPv6 address assigned to this computer.
+ The address must be unique and not already in use by
+ another piece of equipment on the local network.
+
+
+
+ Default Router - The
+ IPv6 address of the network's default
+ gateway.
+
+
+
+ The last network configuration menu is used to configure
+ the Domain Name System (DNS) resolver,
+ which converts hostnames to and from network addresses. If
+ DHCP or SLAAC was used
+ to autoconfigure the network interface, the Resolver
+ Configuration values may already be filled in.
+ Otherwise, enter the local network's domain name in the
+ Search field. DNS #1
+ and DNS #2 are the IPv4
+ and/or IPv6 addresses of the
+ DNS servers. At least one
+ DNS server is required.
+
+
+
+ Once the interface is configured, select a mirror site
+ that is located in the same region of the world as the
+ computer on which &os; is being installed. Files can be
+ retrieved more quickly when the mirror is close to the
+ target computer, reducing installation time.
+
+