Index: head/sys/arm64/conf/Makefile =================================================================== --- head/sys/arm64/conf/Makefile +++ head/sys/arm64/conf/Makefile @@ -0,0 +1,5 @@ +# $FreeBSD$ + +TARGET=arm64 + +.include "${.CURDIR}/../../conf/makeLINT.mk" Index: head/sys/arm64/conf/NOTES =================================================================== --- head/sys/arm64/conf/NOTES +++ head/sys/arm64/conf/NOTES @@ -0,0 +1,245 @@ +# +# NOTES -- Lines that can be cut/pasted into kernel and hints configs. +# +# This file contains machine dependent kernel configuration notes. For +# machine independent notes, look in /sys/conf/NOTES. +# +# $FreeBSD$ +# + +# +# We want LINT to cover profiling as well. +# Except it's broken. +#profile 2 + +# +# Enable the kernel DTrace hooks which are required to load the DTrace +# kernel modules. +# +options KDTRACE_HOOKS + +# +# Most of the following is copied from ARM64 GENERIC. +cpu ARM64 + +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support + +options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. +options KDTRACE_FRAME # Ensure frames are compiled in +options VFP # Floating-point support +options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default +options INTRNG + +nooptions GDB # Support remote GDB -- not supported + +# SoC support +options SOC_ALLWINNER_A64 +options SOC_ALLWINNER_H5 +options SOC_CAVM_THUNDERX +options SOC_HISI_HI6220 +options SOC_BRCM_BCM2837 +options SOC_MARVELL_8K +options SOC_ROCKCHIP_RK3328 +options SOC_ROCKCHIP_RK3399 +options SOC_XILINX_ZYNQ + +# Timer drivers +device a10_timer + +# Annapurna Alpine drivers +device al_ccu # Alpine Cache Coherency Unit +device al_nb_service # Alpine North Bridge Service +device al_iofic # I/O Fabric Interrupt Controller +device al_serdes # Serializer/Deserializer +device al_udma # Universal DMA + +# Qualcomm Snapdragon drivers +device qcom_gcc # Global Clock Controller + +# VirtIO support +device virtio +device virtio_pci +device virtio_mmio +device virtio_blk +device vtnet + +# CPU frequency control +device cpufreq + +# Bus drivers +device al_pci # Annapurna Alpine PCI-E +options PCI_HP # PCI-Express native HotPlug +options PCI_IOV # PCI SR-IOV support + +# Ethernet NICs +device mdio +device awg # Allwinner EMAC Gigabit Ethernet +device axgbe # AMD Opteron A1100 integrated NIC +device neta # Marvell Armada 370/38x/XP/3700 NIC +device smc # SMSC LAN91C111 +device vnic # Cavium ThunderX NIC +device al_eth # Annapurna Alpine Ethernet NIC +device dwc_rk # Rockchip Designware +device dwc_socfpga # Altera SOCFPGA Ethernet MAC + +# Etherswitch devices +device e6000sw # Marvell mv88e6085 based switches + +# NVM Express (NVMe) support +device nvme # base NVMe driver +options NVME_USE_NVD=0 # prefer the cam(4) based nda(4) driver +device nvd # expose NVMe namespaces as disks, depends on nvme + +# MMC/SD/SDIO Card slot support +device sdhci_xenon # Marvell Xenon SD/MMC controller +device aw_mmc # Allwinner SD/MMC controller +device dwmmc +device dwmmc_altera +device rk_emmcphy + +# Serial (COM) ports +device uart_msm # Qualcomm MSM UART driver +device uart_mu # RPI3 aux port +device uart_mvebu # Armada 3700 UART driver +device uart_ns8250 # ns8250-type UART driver +device uart_snps +device pl011 + +# USB support +device aw_ehci # Allwinner EHCI USB interface (USB 2.0) +device aw_usbphy # Allwinner USB PHY +device dwcotg # DWC OTG controller +device ehci_mv # Marvell EHCI USB interface + +# USB ethernet support +device muge +device smsc + +# Sound support +device a10_codec + +# DMA controller +device a31_dmac + +# GPIO / PINCTRL +device a37x0_gpio # Marvell Armada 37x0 GPIO controller +device aw_gpio # Allwinner GPIO controller +device fdt_pinctrl +device mv_gpio # Marvell GPIO controller +device mvebu_pinctrl # Marvell Pinmux Controller +device rk_gpio # RockChip GPIO Controller +device rk_pinctrl # RockChip Pinmux Controller + +# I2C +device aw_rsb # Allwinner Reduced Serial Bus +device bcm2835_bsc # Broadcom BCM283x I2C bus +device twsi # Allwinner I2C controller +device rk_i2c # RockChip I2C controller + +# Clock and reset controllers +device aw_ccu # Allwinner clock controller + +# Interrupt controllers +device aw_nmi # Allwinner NMI support +device mv_cp110_icu # Marvell CP110 ICU +device mv_ap806_gicp # Marvell AP806 GICP + +# Real-time clock support +device aw_rtc # Allwinner Real-time Clock +device mv_rtc # Marvell Real-time Clock + +# Watchdog controllers +device aw_wdog # Allwinner Watchdog + +# Power management controllers +device axp81x # X-Powers AXP81x PMIC +device rk805 # RockChip RK805 PMIC + +# EFUSE +device aw_sid # Allwinner Secure ID EFUSE + +# Thermal sensors +device aw_thermal # Allwinner Thermal Sensor Controller +device mv_thermal # Marvell Thermal Sensor Controller + +# SPI +device bcm2835_spi # Broadcom BCM283x SPI bus + +# PWM +device pwm +device aw_pwm + +device vt_efifb + +# EVDEV support +options EVDEV_SUPPORT # evdev support in legacy drivers +device aw_cir + +# Pseudo devices. +options EFIRT # EFI Runtime Services + +# EXT_RESOURCES pseudo devices +options EXT_RESOURCES +device clk +device phy +device hwreset +device nvmem +device regulator +device syscon +device aw_syscon + +# Chip-specific errata +options THUNDERX_PASS_1_1_ERRATA + +options FDT +device acpi + +# DTBs +makeoptions MODULES_EXTRA="dtb/allwinner dtb/rockchip dtb/rpi" + +# Add CAMDEBUG stuff +options CAMDEBUG +options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) + +# bring in camified MMC too +options MMCCAM + +# No support for floppies on arm64 +nodevice fdc + +# arm64 doesn't support inb/outb, so disable chipset probing which needs it +nooptions PPC_PROBE_CHIPSET + +# can't support syscons, no inb/outb, ditto for the screen savers +nodevice sc +nodevice blank_saver +nodevice daemon_saver +nodevice dragon_saver +nodevice fade_saver +nodevice fire_saver +nodevice green_saver +nodevice logo_saver +nodevice rain_saver +nodevice snake_saver +nodevice star_saver +nodevice warp_saver + +# These cause weird issues, not sure why +nodevice ukbd +nooptions DEBUG + +# Makes assumptions about bus tags that aren't true on arm64 +nodevice snd_cmi + +# arm64 didn't exist for these releases, so doesn't have the required compat +# support. Just disable them because they are meaningless. +nooptions COMPAT_FREEBSD4 +nooptions COMPAT_FREEBSD5 +nooptions COMPAT_FREEBSD6 +nooptions COMPAT_FREEBSD7 +nooptions COMPAT_FREEBSD9 +nooptions COMPAT_FREEBSD10 + +# arm64 supports 32-bit FreeBSD/arm binaries (armv[67] ABIs) +options COMPAT_FREEBSD32 # Compatible with FreeBSD/arm