Index: head/libexec/rc/rc.conf =================================================================== --- head/libexec/rc/rc.conf +++ head/libexec/rc/rc.conf @@ -121,9 +121,9 @@ nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhclient_program="/sbin/dhclient" # Path to dhcp client program. dhclient_flags="" # Extra flags to pass to dhcp client. -#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only +#dhclient_flags_em0="" # Extra dhclient flags for em0 only background_dhclient="NO" # Start dhcp client in the background. -#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. +#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. synchronous_dhclient="NO" # Start dhclient directly on configured # interfaces during startup. defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. @@ -147,19 +147,19 @@ # firewall. #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for # "client" firewall. -firewall_simple_iif="ed1" # Inside network interface for "simple" +firewall_simple_iif="em1" # Inside network interface for "simple" # firewall. firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" # firewall. -firewall_simple_oif="ed0" # Outside network interface for "simple" +firewall_simple_oif="em0" # Outside network interface for "simple" # firewall. firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" # firewall. -#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" +#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" # firewall. #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix # for "simple" firewall. -#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" +#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" # firewall. #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix # for "simple" firewall. @@ -241,14 +241,14 @@ #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. -#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry -#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias -#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. -#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device +#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry +#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias +#ifconfig_em0_name="net0" # Change interface name from em0 to net0. +#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device #create_args_vlan0="vlan 102" # vlan tag for vlan0 device #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) -#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. +#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. # #autobridge_interfaces="bridge0" # List of bridges to check #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge @@ -336,7 +336,7 @@ pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). -pppoed_interface="fxp0" # The interface that pppoed runs on. +pppoed_interface="em0" # The interface that pppoed runs on. sshd_enable="NO" # Enable sshd sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_flags="" # Additional flags for sshd. @@ -506,11 +506,11 @@ # addrs. #route6d_flags="-q" # If you want to run a routing daemon on an end # node, you should stop advertisement. -#ipv6_network_interfaces="ed0 ep0" # Examples for router +#ipv6_network_interfaces="em0 em1" # Examples for router # or static configuration for end node. # Choose correct prefix value. -#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. -#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. +#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. +#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. ipv6_default_interface="NO" # Default output interface for scoped addrs. # This works only with # ipv6_gateway_enable="NO". Index: head/sbin/ifconfig/ifconfig.8 =================================================================== --- head/sbin/ifconfig/ifconfig.8 +++ head/sbin/ifconfig/ifconfig.8 @@ -28,7 +28,7 @@ .\" From: @(#)ifconfig.8 8.3 (Berkeley) 1/5/94 .\" $FreeBSD$ .\" -.Dd May 3, 2019 +.Dd May 18, 2019 .Dt IFCONFIG 8 .Os .Sh NAME @@ -196,7 +196,7 @@ parameter is a string of the form .Dq name unit , for example, -.Dq Li ed0 . +.Dq Li em0 . .It Ar groupname List the interfaces in the given group. .El @@ -2935,26 +2935,26 @@ with a network mask of .Li 255.255.255.0 , to the interface -.Li fxp0 : -.Dl # ifconfig fxp0 inet 192.0.2.10 netmask 255.255.255.0 +.Li em0 : +.Dl # ifconfig em0 inet 192.0.2.10 netmask 255.255.255.0 .Pp Add the IPv4 address .Li 192.0.2.45 , with the CIDR network prefix .Li /28 , to the interface -.Li ed0 , +.Li em0 , using .Cm add as a synonym for the canonical form of the option .Cm alias : -.Dl # ifconfig ed0 inet 192.0.2.45/28 add +.Dl # ifconfig em0 inet 192.0.2.45/28 add .Pp Remove the IPv4 address .Li 192.0.2.45 from the interface -.Li ed0 : -.Dl # ifconfig ed0 inet 192.0.2.45 -alias +.Li em0 : +.Dl # ifconfig em0 inet 192.0.2.45 -alias .Pp Enable IPv6 functionality of the interface: .Dl # ifconfig em0 inet6 -ifdisabled Index: head/share/man/man5/rc.conf.5 =================================================================== --- head/share/man/man5/rc.conf.5 +++ head/share/man/man5/rc.conf.5 @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd March 21, 2019 +.Dd May 18, 2019 .Dt RC.CONF 5 .Os .Sh NAME @@ -1264,11 +1264,11 @@ syntax with the address family keyword such as .Li inet . Assuming that the interface in question was -.Li ed0 , +.Li em0 , it might look something like this: .Bd -literal -ifconfig_ed0_alias0="inet 127.0.0.253 netmask 0xffffffff" -ifconfig_ed0_alias1="inet 127.0.0.254 netmask 0xffffffff" +ifconfig_em0_alias0="inet 127.0.0.253 netmask 0xffffffff" +ifconfig_em0_alias1="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp It also possible to configure multiple IP addresses in Classless @@ -1308,11 +1308,11 @@ .Li inet6 . .Pp With the interface in question being -.Li ed0 , +.Li em0 , an example could look like: .Bd -literal -ifconfig_ed0_alias2="inet 192.0.2.129/27" -ifconfig_ed0_alias3="inet 192.0.2.1-5/28" +ifconfig_em0_alias2="inet 192.0.2.129/27" +ifconfig_em0_alias3="inet 192.0.2.1-5/28" .Ed .Pp and so on. @@ -1334,10 +1334,10 @@ Execution stops at the first unsuccessful access, so if something like this is present: .Bd -literal -ifconfig_ed0_alias0="inet 127.0.0.251 netmask 0xffffffff" -ifconfig_ed0_alias1="inet 127.0.0.252 netmask 0xffffffff" -ifconfig_ed0_alias2="inet 127.0.0.253 netmask 0xffffffff" -ifconfig_ed0_alias4="inet 127.0.0.254 netmask 0xffffffff" +ifconfig_em0_alias0="inet 127.0.0.251 netmask 0xffffffff" +ifconfig_em0_alias1="inet 127.0.0.252 netmask 0xffffffff" +ifconfig_em0_alias2="inet 127.0.0.253 netmask 0xffffffff" +ifconfig_em0_alias4="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp Then note that alias4 would @@ -1353,7 +1353,7 @@ .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n and can have all of entries in a variable like the following: .Bd -literal -ifconfig_ed0_aliases="\\ +ifconfig_em0_aliases="\\ inet 127.0.0.251 netmask 0xffffffff \\ inet 127.0.0.252 netmask 0xffffffff \\ inet 127.0.0.253 netmask 0xffffffff \\ @@ -1460,11 +1460,11 @@ .Va ifconfig_ Ns Aq Ar interface variable. For instance, to initialize the -.Li ed0 +.Li em0 device via DHCP, it is possible to use something like: .Bd -literal -ifconfig_ed0="DHCP" +ifconfig_em0="DHCP" .Ed .Pp If you want to configure your wireless interface with @@ -1515,7 +1515,7 @@ .Pp It is also possible to rename an interface by doing: .Bd -literal -ifconfig_ed0_name="net0" +ifconfig_em0_name="net0" ifconfig_net0="inet 192.0.2.1 netmask 0xffffff00" .Ed .It Va ipv6_enable @@ -1688,8 +1688,8 @@ keyword. For example: .Bd -literal -ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" -ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" +ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" +ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" .Ed .Pp Interfaces that have an @@ -1716,7 +1716,7 @@ If only a link-local address is needed on the interface, the following configuration can be used: .Bd -literal -ifconfig_ed0_ipv6="inet6 auto_linklocal" +ifconfig_em0_ipv6="inet6 auto_linklocal" .Ed .Pp A link-local address can also be configured manually. @@ -1725,7 +1725,7 @@ card is replaced. For example: .Bd -literal -ifconfig_ed0_ipv6="inet6 fe80::1 prefixlen 64" +ifconfig_em0_ipv6="inet6 fe80::1 prefixlen 64" .Ed .It Va ipv6_prefix_ Ns Aq Ar interface .Pq Vt str @@ -1739,15 +1739,15 @@ .Pp For example, the following configuration .Bd -literal -ipv6_prefix_ed0="2001:db8:1:0 2001:db8:2:0" +ipv6_prefix_em0="2001:db8:1:0 2001:db8:2:0" .Ed .Pp is equivalent to the following: .Bd -literal -ifconfig_ed0_alias0="inet6 2001:db8:1:: eui64 prefixlen 64" -ifconfig_ed0_alias1="inet6 2001:db8:1:: prefixlen 64 anycast" -ifconfig_ed0_alias2="inet6 2001:db8:2:: eui64 prefixlen 64" -ifconfig_ed0_alias3="inet6 2001:db8:2:: prefixlen 64 anycast" +ifconfig_em0_alias0="inet6 2001:db8:1:: eui64 prefixlen 64" +ifconfig_em0_alias1="inet6 2001:db8:1:: prefixlen 64 anycast" +ifconfig_em0_alias2="inet6 2001:db8:2:: eui64 prefixlen 64" +ifconfig_em0_alias3="inet6 2001:db8:2:: prefixlen 64 anycast" .Ed .Pp These Subnet-Router anycast addresses will be added only when Index: head/tools/tools/tinybsd/conf/firewall/etc/rc.firewall =================================================================== --- head/tools/tools/tinybsd/conf/firewall/etc/rc.firewall +++ head/tools/tools/tinybsd/conf/firewall/etc/rc.firewall @@ -195,13 +195,13 @@ ############ # set these to your outside interface network and netmask and ip - oif="ed0" + oif="em0" onet="192.0.2.0" omask="255.255.255.240" oip="192.0.2.1" # set these to your inside interface network and netmask and ip - iif="ed1" + iif="em1" inet="192.0.2.16" imask="255.255.255.240" iip="192.0.2.17" Index: head/usr.sbin/jail/jail.8 =================================================================== --- head/usr.sbin/jail/jail.8 +++ head/usr.sbin/jail/jail.8 @@ -25,7 +25,7 @@ .\" .\" $FreeBSD$ .\" -.Dd November 27, 2018 +.Dd May 18, 2019 .Dt JAIL 8 .Os .Sh NAME @@ -1101,7 +1101,7 @@ mount.devfs; host.hostname = testhostname; ip4.addr = 192.0.2.100; - interface = ed0; + interface = em0; exec.start = "/bin/sh /etc/rc"; exec.stop = "/bin/sh /etc/rc.shutdown"; }