Index: audio/py-pylast/Makefile =================================================================== --- audio/py-pylast/Makefile +++ audio/py-pylast/Makefile @@ -5,7 +5,7 @@ PORTVERSION= 0.5.11 CATEGORIES= audio python MASTER_SITES= CHEESESHOP -PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} +PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} MAINTAINER= feld@FreeBSD.org COMMENT= A Python interface to Last.fm Index: audio/sphinxbase/Makefile =================================================================== --- audio/sphinxbase/Makefile +++ audio/sphinxbase/Makefile @@ -3,7 +3,7 @@ PORTNAME= sphinxbase PORTVERSION= 0.8 -PORTREVISION= 1 +PORTREVISION= 1 CATEGORIES= audio accessibility MASTER_SITES= SF/cmusphinx/${PORTNAME}/${PORTVERSION} Index: biology/seqtools/Makefile =================================================================== --- biology/seqtools/Makefile +++ biology/seqtools/Makefile @@ -9,7 +9,7 @@ MAINTAINER= pi@FreeBSD.org COMMENT= Tools for visualising sequence alignments -LICENSE= GPLv3 +LICENSE= GPLv3 LIB_DEPENDS= libcurl.so:${PORTSDIR}/ftp/curl \ libexecinfo.so:${PORTSDIR}/devel/libexecinfo \ Index: cad/brickutils/Makefile =================================================================== --- cad/brickutils/Makefile +++ cad/brickutils/Makefile @@ -28,7 +28,7 @@ USE_GNOME= pygtk2 USE_PYTHON= yes -PORTDOCS= * +PORTDOCS= * DOCSRCDIR1= ${WRKSRC} DOC_FILES1= ChangeLog @@ -43,7 +43,7 @@ .include .if ${PORT_OPTIONS:MDOCS} -DISTFILES+= ${PORTNAME}-manual-it.pdf:docs \ +DISTFILES+= ${PORTNAME}-manual-it.pdf:docs \ ${PORTNAME}-manual.pdf:docs .endif Index: cad/kicad-devel/Makefile =================================================================== --- cad/kicad-devel/Makefile +++ cad/kicad-devel/Makefile @@ -1,13 +1,13 @@ # Created by: Michael Reifenberger # $FreeBSD$ -PORTNAME= kicad -DISTVERSION= r${BZR_SRC_REV} +PORTNAME= kicad +DISTVERSION= r${BZR_SRC_REV} PORTREVISION= 6 -CATEGORIES= cad -MASTER_SITES= ${MASTER_SITE_LOCAL} -MASTER_SITE_SUBDIR= mr -PKGNAMESUFFIX= -devel +CATEGORIES= cad +MASTER_SITES= ${MASTER_SITE_LOCAL} +MASTER_SITE_SUBDIR= mr +PKGNAMESUFFIX= -devel DIST_SUBDIR= ${PORTNAME} MAINTAINER= mr@FreeBSD.org @@ -19,7 +19,7 @@ LIB_DEPENDS= libboost_thread.so:${PORTSDIR}/devel/boost-libs -CONFLICTS= kicad-2013* +CONFLICTS= kicad-2013* DOCVERSION= 1.1 LIBVERSION= 1.0 @@ -28,7 +28,7 @@ USE_WX= 2.8 WX_UNICODE= yes USE_GNOME= atk # Required by libwx_gtk2_aui-2.8.so -USE_PYTHON= yes +USE_PYTHON= yes PLIST_SUB= OPSYS=${OPSYS} \ DESKTOPDIR=${DESKTOPDIR:S|^${PREFIX}/||} @@ -52,10 +52,10 @@ .endif .if defined(BOOTSTRAP) -BOOST_RELEASE= 1.54.0 -BOOST_VERS= ${BOOST_RELEASE:S|.|_|g} -BZR_SRC_REV!= bzr revno lp:kicad -BZR_DOC_REV!= bzr revno lp:~kicad-developers/kicad/doc +BOOST_RELEASE= 1.54.0 +BOOST_VERS= ${BOOST_RELEASE:S|.|_|g} +BZR_SRC_REV!= bzr revno lp:kicad +BZR_DOC_REV!= bzr revno lp:~kicad-developers/kicad/doc .else .include "Makefile.bzr_rev" .endif @@ -67,8 +67,8 @@ # make makesum && make && make makeplist # < Check PLIST_FILE_LIST below > -FETCH_DEPENDS+= svn:${PORTSDIR}/devel/subversion -FETCH_DEPENDS+= bzr:${PORTSDIR}/devel/bzr +FETCH_DEPENDS+= svn:${PORTSDIR}/devel/subversion +FETCH_DEPENDS+= bzr:${PORTSDIR}/devel/bzr showversions: @${ECHO} "BOOST_RELEASE: ${BOOST_RELEASE}" Index: cad/pcb/Makefile =================================================================== --- cad/pcb/Makefile +++ cad/pcb/Makefile @@ -27,7 +27,7 @@ CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= ${PTHREAD_LIBS} -L${LOCALBASE}/lib -PORTDOCS= \ +PORTDOCS= \ pcb.html pcb.pdf refcard.pdf pad.png puller.png thermal.png \ examples tutorial gcode.png gcode_control_img.png \ gcode_tool_path.png Index: chinese/msttf/Makefile =================================================================== --- chinese/msttf/Makefile +++ chinese/msttf/Makefile @@ -35,7 +35,7 @@ .include .if !exists(${DISTDIR}/${DIST_SUBDIR}/${MSTTF_SIMHEI}) -IGNORE= Because of licensing restrictions, you must copy the three TrueType \ +IGNORE= Because of licensing restrictions, you must copy the three TrueType \ fonts from your copy of Microsoft Windows(TM) 2000/XP manually. End \ user can use these fonts freely in his/her own computers. Please \ place these fonts in ${DISTDIR}/${DIST_SUBDIR}. \ @@ -53,7 +53,7 @@ .endif .if !exists(${DISTDIR}/${DIST_SUBDIR}/${MSTTF_TAHOMA}) -IGNORE= Because of licensing restrictions, you must copy the three \ +IGNORE= Because of licensing restrictions, you must copy the three \ TrueType fonts from your copy of Microsoft Windows(TM) \ 2000/XP manually. End user can use these fonts freely in \ his/her own computers. Please place these fonts in \ Index: converters/asr10/Makefile =================================================================== --- converters/asr10/Makefile +++ converters/asr10/Makefile @@ -1,13 +1,13 @@ # Created by: M.Indlekofer@gmx.de # $FreeBSD$ -PORTNAME= asr10 -PORTVERSION= 1.0 -CATEGORIES= converters -MASTER_SITES= http://members.tripod.com/kmi9000/files/ +PORTNAME= asr10 +PORTVERSION= 1.0 +CATEGORIES= converters +MASTER_SITES= http://members.tripod.com/kmi9000/files/ -MAINTAINER= M.Indlekofer@gmx.de -COMMENT= Access to Ensoniq EPS/EPS+/ASR devices and image files +MAINTAINER= M.Indlekofer@gmx.de +COMMENT= Access to Ensoniq EPS/EPS+/ASR devices and image files do-install: ${INSTALL_PROGRAM} ${WRKSRC}/${PORTNAME} ${STAGEDIR}${PREFIX}/bin/ Index: converters/bibtexconv/Makefile =================================================================== --- converters/bibtexconv/Makefile +++ converters/bibtexconv/Makefile @@ -12,7 +12,7 @@ LICENSE= GPLv3 -LIB_DEPENDS= libcurl.so:${PORTSDIR}/ftp/curl +LIB_DEPENDS= libcurl.so:${PORTSDIR}/ftp/curl GNU_CONFIGURE= yes USES= gmake @@ -20,8 +20,8 @@ PLIST_FILES= bin/bibtexconv bin/bibtexconv-odt \ man/man1/bibtexconv.1.gz man/man1/bibtexconv-odt.1.gz -PORTEXAMPLES= ExampleReferences.bib ODT-Template.odt odt-example.export \ - web-example.export text-example.export +PORTEXAMPLES= ExampleReferences.bib ODT-Template.odt odt-example.export \ + web-example.export text-example.export OPTIONS_DEFINE= EXAMPLES Index: databases/luasql-postgres/Makefile =================================================================== --- databases/luasql-postgres/Makefile +++ databases/luasql-postgres/Makefile @@ -4,7 +4,8 @@ PORTNAME= luasql LUASQL_DRIVER= postgres -MASTERDIR= ${.CURDIR}/../luasql-mysql + +MASTERDIR= ${.CURDIR}/../luasql-mysql NO_STAGE= yes .include "${MASTERDIR}/Makefile" Index: databases/luasql-sqlite3/Makefile =================================================================== --- databases/luasql-sqlite3/Makefile +++ databases/luasql-sqlite3/Makefile @@ -5,7 +5,7 @@ LUASQL_DRIVER= sqlite3 -MASTERDIR= ${.CURDIR}/../luasql-mysql +MASTERDIR= ${.CURDIR}/../luasql-mysql NO_STAGE= yes .include "${MASTERDIR}/Makefile" Index: databases/postgresql84-docs/Makefile =================================================================== --- databases/postgresql84-docs/Makefile +++ databases/postgresql84-docs/Makefile @@ -3,8 +3,8 @@ PORTNAME= postgresql PORTREVISION= 0 -PKGNAMESUFFIX?= ${DISTV:S/.//}-docs -DISTV= ${DISTVERSION:R} +PKGNAMESUFFIX?= ${DISTV:S/.//}-docs +DISTV= ${DISTVERSION:R} MAINTAINER= pgsql@FreeBSD.org COMMENT= The PostgreSQL documentation set Index: deskutils/babytrans/Makefile =================================================================== --- deskutils/babytrans/Makefile +++ deskutils/babytrans/Makefile @@ -10,7 +10,7 @@ MAINTAINER= ports@FreeBSD.org COMMENT= GTK+/GNOME front-end for Babylon Translator .dic files -USES= gmake gettext pathfix +USES= gmake gettext pathfix USE_GNOME= gtk12 gnomeprefix GNU_CONFIGURE= yes CPPFLAGS+= ${CXXFLAGS} -I${LOCALBASE}/include Index: deskutils/strigi/Makefile =================================================================== --- deskutils/strigi/Makefile +++ deskutils/strigi/Makefile @@ -5,7 +5,7 @@ PORTVERSION= ${STRIGI_VERSION} PORTREVISION= 2 CATEGORIES= deskutils -DISTFILES= # +DISTFILES= # MAINTAINER= kde@FreeBSD.org COMMENT= Strigi desktop search (meta port) Index: devel/R-cran-gsubfn/Makefile =================================================================== --- devel/R-cran-gsubfn/Makefile +++ devel/R-cran-gsubfn/Makefile @@ -10,9 +10,9 @@ MAINTAINER= skreuzer@FreeBSD.org COMMENT= R package used for string matching, substitution and parsing -LICENSE= GPLv2 +LICENSE= GPLv2 -RUN_DEPENDS= R-cran-proto>=0.3.9.2_6:${PORTSDIR}/devel/R-cran-proto +RUN_DEPENDS= R-cran-proto>=0.3.9.2_6:${PORTSDIR}/devel/R-cran-proto USES= cran:auto-plist Index: devel/flowdesigner/Makefile =================================================================== --- devel/flowdesigner/Makefile +++ devel/flowdesigner/Makefile @@ -14,7 +14,7 @@ LIB_DEPENDS= speex.1:${PORTSDIR}/audio/speex \ fftw.2:${PORTSDIR}/math/fftw -USES= pathfix gmake pkgconfig +USES= pathfix gmake pkgconfig USE_GNOME= libgnomeui libxml2 USE_AUTOTOOLS= libtool LIBTOOLFILES= ${CONFIGURE_SCRIPT} FuzzyEngine/configure \ Index: devel/linux_libusb/Makefile =================================================================== --- devel/linux_libusb/Makefile +++ devel/linux_libusb/Makefile @@ -43,7 +43,7 @@ @${ECHO_MSG} '===> Set SRC_BASE to use an alternate source tree' .if ${OSVERSION} < 1000000 -IGNORE= doesn't build on < 10.x +IGNORE= doesn't build on < 10.x .endif .if !exists(${SRC_BASE}/sys/i386/linux/syscalls.master) IGNORE= requires kernel source present in ${SRC_BASE}/sys Index: devel/openocd/Makefile =================================================================== --- devel/openocd/Makefile +++ devel/openocd/Makefile @@ -43,7 +43,7 @@ STLINK_DESC= Support STLink Programmer TI_ICDI_DESC= Support TI ICDI JTAG Programmer OSBDM_DESC= Support OSBDM Programmer (JTAG only) -OPENDOUS= Support EStick/OpenDous Programmer +OPENDOUS= Support EStick/OpenDous Programmer SYSFSGPIO= Support Programming via sysfs GPIOs RMTBITBANG_DESC=Support Remote-Bitbang Driver MINIDRIVER_DESC=Dummy minidriver only (will exclude others!) Index: devel/p5-Text-LevenshteinXS/Makefile =================================================================== --- devel/p5-Text-LevenshteinXS/Makefile +++ devel/p5-Text-LevenshteinXS/Makefile @@ -1,14 +1,14 @@ # Created by: christian # $FreeBSD$ -PORTNAME= Text-LevenshteinXS -PORTVERSION= 0.03 -CATEGORIES= devel perl5 -MASTER_SITES= CPAN -PKGNAMEPREFIX= p5- +PORTNAME= Text-LevenshteinXS +PORTVERSION= 0.03 +CATEGORIES= devel perl5 +MASTER_SITES= CPAN +PKGNAMEPREFIX= p5- -MAINTAINER= christian@karg.org -COMMENT= Text::LevenshteinXS - CPAN Levenshtein edit distance +MAINTAINER= christian@karg.org +COMMENT= Text::LevenshteinXS - CPAN Levenshtein edit distance USES= perl5 USE_PERL5= configure Index: devel/py-anonfunc/Makefile =================================================================== --- devel/py-anonfunc/Makefile +++ devel/py-anonfunc/Makefile @@ -7,7 +7,7 @@ MASTER_SITES= ${MASTER_SITE_LOCAL} \ http://people.freebsd.org/~perky/distfiles/ MASTER_SITE_SUBDIR= perky -PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} +PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} MAINTAINER= ports@FreeBSD.org COMMENT= Python module that provides easy anonymous function Index: devel/sfslite-noopt/Makefile =================================================================== --- devel/sfslite-noopt/Makefile +++ devel/sfslite-noopt/Makefile @@ -1,10 +1,10 @@ # Created by: max # $FreeBSD$ -BUILD_MODE = shared -MASTERDIR= ${.CURDIR}/../../devel/sfslite +BUILD_MODE= shared +MASTERDIR= ${.CURDIR}/../../devel/sfslite COMMENT= sfslite without optimization for debugging -PKG_INSTALL= ${MASTERDIR}/pkg-install +PKG_INSTALL= ${MASTERDIR}/pkg-install NO_STAGE= yes .include "${MASTERDIR}/Makefile" Index: devel/ucpp/Makefile =================================================================== --- devel/ucpp/Makefile +++ devel/ucpp/Makefile @@ -14,7 +14,7 @@ PLIST_FILES= bin/ucpp man/man1/ucpp.1.gz USES= gmake -WRKSRC= ${WRKDIR}/${PORTNAME} +WRKSRC= ${WRKDIR}/${PORTNAME} do-install: ${INSTALL_PROGRAM} ${WRKSRC}/${PORTNAME} ${STAGEDIR}${PREFIX}/bin/ Index: editors/gmanedit/Makefile =================================================================== --- editors/gmanedit/Makefile +++ editors/gmanedit/Makefile @@ -10,7 +10,7 @@ MAINTAINER= ports@FreeBSD.org COMMENT= A GNOME manpages editor -USES= pathfix gettext gmake pkgconfig +USES= pathfix gettext gmake pkgconfig USE_GNOME= gtk20 GNU_CONFIGURE= yes CPPFLAGS+= -I${LOCALBASE}/include Index: editors/libreoffice-i18n/Makefile =================================================================== --- editors/libreoffice-i18n/Makefile +++ editors/libreoffice-i18n/Makefile @@ -1,9 +1,9 @@ # $FreeBSD$ .include "${.CURDIR}/../libreoffice/Makefile.common" -UNIQUENAME= ${PORTNAME}${PKGNAMESUFFIX} +UNIQUENAME= ${PORTNAME}${PKGNAMESUFFIX} PKGNAMESUFFIX= -i18n -DISTFILES= #none +DISTFILES= #none MASTER_SITES= #none EXTRACT_ONLY= #none Index: emulators/linux_base-c6/Makefile =================================================================== --- emulators/linux_base-c6/Makefile +++ emulators/linux_base-c6/Makefile @@ -100,7 +100,7 @@ ALWAYS_KEEP_DISTFILES= yes .endif -CONFLICTS= linux_base-gentoo* linux_base-f* linux-glib2-* +CONFLICTS= linux_base-gentoo* linux_base-f* linux-glib2-* ONLY_FOR_ARCHS= i386 amd64 LINUX_RPM_ARCH= i686 Index: emulators/open-vm-tools-nox11/Makefile =================================================================== --- emulators/open-vm-tools-nox11/Makefile +++ emulators/open-vm-tools-nox11/Makefile @@ -1,7 +1,7 @@ # Created by: Martin Blapp # $FreeBSD$ -MASTERDIR= ${.CURDIR}/../open-vm-tools +MASTERDIR= ${.CURDIR}/../open-vm-tools PKGNAMESUFFIX= -nox11 OPTIONS_UNSET= X11 LIBNOTIFY Index: finance/openerp-server/Makefile =================================================================== --- finance/openerp-server/Makefile +++ finance/openerp-server/Makefile @@ -7,7 +7,7 @@ PORTEPOCH= 1 CATEGORIES= finance python MASTER_SITES= http://nightly.openerp.com/7.0/nightly/src/ -DISTNAME= openerp-${PORTVERSION}-${NIGHTLY} +DISTNAME= openerp-${PORTVERSION}-${NIGHTLY} MAINTAINER= pakhom706@gmail.com COMMENT= Open source application ERP & CRM in Python using Postgresql @@ -31,7 +31,7 @@ NIGHTLY= 20140115-002435 NIGHTLY_= ${NIGHTLY:S/-/_/g} -WRKSRC= ${WRKDIR}/openerp-${PORTVERSION}-${NIGHTLY} +WRKSRC= ${WRKDIR}/openerp-${PORTVERSION}-${NIGHTLY} USE_RC_SUBR= openerpd SUB_FILES= openerp-server.conf pkg-message Index: games/bombz/Makefile =================================================================== --- games/bombz/Makefile +++ games/bombz/Makefile @@ -21,7 +21,7 @@ WRKSRC= ${WRKDIR}/Bombz -USES= dos2unix zip +USES= dos2unix zip DOS2UNIX_FILES= *.txt USE_SDL= sdl image mixer INSTALLS_ICONS= yes Index: games/dangerdeep/Makefile =================================================================== --- games/dangerdeep/Makefile +++ games/dangerdeep/Makefile @@ -37,7 +37,7 @@ .endif .if ${OSVERSION} >= 1000000 -BROKEN= Does not compile on FreeBSD 10 +BROKEN= Does not compile on FreeBSD 10 .endif post-patch: Index: games/gtetrinet/Makefile =================================================================== --- games/gtetrinet/Makefile +++ games/gtetrinet/Makefile @@ -12,7 +12,7 @@ COMMENT= Version of the popular TetriNET multiplayer Tetris clone USE_BZIP2= yes -USES= pathfix gettext gmake pkgconfig +USES= pathfix gettext gmake pkgconfig USE_GNOME= esound gnomeprefix libgnomeui GNU_CONFIGURE= yes CPPFLAGS+= -I${LOCALBASE}/include Index: games/mangos/Makefile =================================================================== --- games/mangos/Makefile +++ games/mangos/Makefile @@ -11,7 +11,7 @@ DISTFILES= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} SCRIPTDEV2REV= 245 -MAINTAINER= neon_cyrex@mail.ru +MAINTAINER= neon_cyrex@mail.ru COMMENT= Free dedicated-server for World of Warcraft BROKEN= Fails with newer autotools @@ -34,7 +34,7 @@ USE_LDCONFIG= yes CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib -CONFIGURE_ARGS= --prefix=${PREFIX} --sysconfdir=${PREFIX}/etc --datadir=${PREFIX}/share +CONFIGURE_ARGS= --prefix=${PREFIX} --sysconfdir=${PREFIX}/etc --datadir=${PREFIX}/share NO_STAGE= yes .include Index: games/nethack33/Makefile =================================================================== --- games/nethack33/Makefile +++ games/nethack33/Makefile @@ -25,14 +25,14 @@ MAN6= dgn_comp${HACKEXT}.6 dlb${HACKEXT}.6 lev_comp${HACKEXT}.6 \ ${HACKNAME}.6 recover${HACKEXT}.6 -HACKEXT?= 33 -HACKNAME?= ${TRUEPORTNAME}${HACKEXT} -HACKDIR?= share/${HACKNAME} -HACKLINK= ${TRUEPORTNAME} - -DATADIR= ${PREFIX}/${HACKDIR} -DOCSDIR= ${PREFIX}/share/doc/${HACKNAME} -PKGDEINSTALL= ${WRKDIR}/pkg-deinstall +HACKEXT?= 33 +HACKNAME?=n ${TRUEPORTNAME}${HACKEXT} +HACKDIR?= share/${HACKNAME} +HACKLINK= ${TRUEPORTNAME} + +DATADIR= ${PREFIX}/${HACKDIR} +DOCSDIR= ${PREFIX}/share/doc/${HACKNAME} +PKGDEINSTALL= ${WRKDIR}/pkg-deinstall .if !defined(PKGNAMESUFFIX) USE_XORG= xaw xpm Index: games/patapizza-tetris/Makefile =================================================================== --- games/patapizza-tetris/Makefile +++ games/patapizza-tetris/Makefile @@ -6,7 +6,7 @@ PORTREVISION= 4 CATEGORIES= games MASTER_SITES= SF/nemysisfreebsdp/${CATEGORIES}/:icons -DISTFILES= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} \ +DISTFILES= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} \ ${PORTNAME}.png:icons EXTRACT_ONLY= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} Index: games/twitch/Makefile =================================================================== --- games/twitch/Makefile +++ games/twitch/Makefile @@ -7,14 +7,14 @@ CATEGORIES= games MASTER_SITES= SF/${PORTNAME}/Twitch/${PORTVERSION}/ \ SF/nemysisfreebsdp/${CATEGORIES}/:icons -DISTFILES= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} \ +DISTFILES= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} \ ${PORTNAME}.png:icons -EXTRACT_ONLY= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} +EXTRACT_ONLY= ${PORTNAME}-${DISTVERSION}${EXTRACT_SUFX} MAINTAINER= games@FreeBSD.org COMMENT= Overhead 2-d shooter, reminiscent of games like Robotron -LICENSE= GPLv2 +LICENSE= GPLv2 RUN_DEPENDS= ${PYGAME} Index: graphics/frei0r/Makefile =================================================================== --- graphics/frei0r/Makefile +++ graphics/frei0r/Makefile @@ -29,13 +29,13 @@ .if defined(BUILDING_FREI0R_OPENCV) PORTREVISION= 3 COMMENT= Frei0r OpenCV plugins -PKGNAMESUFFIX= -plugins-opencv +PKGNAMESUFFIX= -plugins-opencv LIB_DEPENDS+= opencv_legacy.2:${PORTSDIR}/graphics/opencv FREI0R_PLUGINS= facebl0r facedetect .elif defined(BUILDING_FREI0R_GAVL) PORTREVISION= 2 COMMENT= Frei0r gavl plugins -PKGNAMESUFFIX= -plugins-gavl +PKGNAMESUFFIX= -plugins-gavl LIB_DEPENDS+= gavl.1:${PORTSDIR}/multimedia/gavl FREI0R_PLUGINS= rgbparade scale0tilt vectorscope .else Index: graphics/glfw2/Makefile =================================================================== --- graphics/glfw2/Makefile +++ graphics/glfw2/Makefile @@ -53,7 +53,7 @@ OPTIONS_DEFINE= DOCS EXAMPLES # Restrict to stable (even) versions, indicated by the second component. -PORTSCOUT= limit:^2\..* +PORTSCOUT= limit:^2\..* post-extract: @${CHMOD} ${BINMODE} ${CONFIGURE_WRKSRC}/${CONFIGURE_SCRIPT} Index: graphics/hugin-devel/Makefile =================================================================== --- graphics/hugin-devel/Makefile +++ graphics/hugin-devel/Makefile @@ -6,7 +6,7 @@ PORTREVISION= 7 CATEGORIES= graphics MASTER_SITES= SF/${PORTNAME}/${PORTNAME}/${PORTNAME}-2013.0 -PKGNAMESUFFIX= -devel +PKGNAMESUFFIX= -devel DISTNAME= hugin-2013.0.0_beta1 MAINTAINER= grog@FreeBSD.org Index: graphics/kix-kmod/Makefile =================================================================== --- graphics/kix-kmod/Makefile +++ graphics/kix-kmod/Makefile @@ -1,12 +1,12 @@ # Created by: Jonathan Belson # $FreeBSD$ -PORTNAME= kix +PORTNAME= kix PORTVERSION= 1.0 PORTREVISION= 1 -CATEGORIES= graphics -MASTER_SITES= http://homepage.ntlworld.com/jon.belson/files/ \ - LOCAL/pgollucci +CATEGORIES= graphics +MASTER_SITES= http://homepage.ntlworld.com/jon.belson/files/ \ + LOCAL/pgollucci PKGNAMESUFFIX= -kmod MAINTAINER= jon@witchspace.com Index: graphics/linux-adobesvg/Makefile =================================================================== --- graphics/linux-adobesvg/Makefile +++ graphics/linux-adobesvg/Makefile @@ -18,7 +18,7 @@ RESTRICTED= Redistribution prohibited NO_BUILD= yes -WRKSRC= ${WRKDIR}/adobesvg-${PORTVERSION:S/.x88//} +WRKSRC= ${WRKDIR}/adobesvg-${PORTVERSION:S/.x88//} LIBDIR= ${PREFIX}/lib/linux-adobesvg SHLIBS= ACE AGM BIB CoolType NPSVG3 SVGCore Index: graphics/processing/Makefile =================================================================== --- graphics/processing/Makefile +++ graphics/processing/Makefile @@ -22,7 +22,7 @@ SUB_FILES= processing -WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION} +WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION} post-extract: ${RM} -rf ${WRKSRC}/java Index: graphics/py-freeimagepy/Makefile =================================================================== --- graphics/py-freeimagepy/Makefile +++ graphics/py-freeimagepy/Makefile @@ -5,7 +5,7 @@ PORTVERSION= 2.0.1 CATEGORIES= graphics python MASTER_SITES= SF/${PORTNAME}/FreeImagePy/V${PORTVERSION} -PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} +PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} DISTNAME= FreeImagePy_w_dll-${PORTVERSION} MAINTAINER= ports@FreeBSD.org Index: graphics/sane-epkowa/Makefile =================================================================== --- graphics/sane-epkowa/Makefile +++ graphics/sane-epkowa/Makefile @@ -45,14 +45,14 @@ PORTREVISION= 5 CATEGORIES= graphics MASTER_SITES= http://lx1.avasys.jp/iscan/${PORTVERSION}/ -DISTNAME= iscan_${PORTVERSION}-1 +DISTNAME= iscan_${PORTVERSION}-1 MAINTAINER= ports@FreeBSD.org COMMENT= The sane-epkowa driver for FreeBSD # use the following two lines for 2.15.0 # MASTER_SITES=http://linux.avasys.jp/drivers/iscan/${PORTVERSION}/ -# DISTNAME= iscan_${PORTVERSION}-3 +# DISTNAME= iscan_${PORTVERSION}-3 WRKSRC=${WRKDIR}/iscan-${PORTVERSION} @@ -74,7 +74,7 @@ # Also pass appropriate flags to configure to use FreeBSD locations. USES= gmake pkgconfig GNU_CONFIGURE= yes -CONFIGURE_ARGS+= --prefix=${PREFIX} LDFLAGS="-L${PREFIX}/lib -lgetline" CPPFLAGS=-I${PREFIX}/include +CONFIGURE_ARGS+=--prefix=${PREFIX} LDFLAGS="-L${PREFIX}/lib -lgetline" CPPFLAGS=-I${PREFIX}/include .include Index: graphics/tesseract/Makefile =================================================================== --- graphics/tesseract/Makefile +++ graphics/tesseract/Makefile @@ -19,7 +19,7 @@ DIST_SUBDIR= ${PORTNAME} PROJECTHOST= tesseract-ocr -WRKSRC= ${WRKDIR}/tesseract-ocr +WRKSRC= ${WRKDIR}/tesseract-ocr GNU_CONFIGURE= yes USE_LDCONFIG= yes Index: irc/eggdrop/Makefile =================================================================== --- irc/eggdrop/Makefile +++ irc/eggdrop/Makefile @@ -12,7 +12,7 @@ MAINTAINER= bdrewery@FreeBSD.org COMMENT= The most popular open source Internet Relay Chat bot -LICENSE= GPLv2 +LICENSE= GPLv2 OPTIONS_DEFINE= DOCS Index: japanese/eterm/Makefile =================================================================== --- japanese/eterm/Makefile +++ japanese/eterm/Makefile @@ -3,7 +3,7 @@ CATEGORIES= japanese -MASTERDIR= ${.CURDIR}/../../x11/eterm +MASTERDIR= ${.CURDIR}/../../x11/eterm MAINTAINER= nobutaka@FreeBSD.org COMMENT= X11 terminal emulator based on rxvt/xterm that supports Japanese Index: japanese/jed/Makefile =================================================================== --- japanese/jed/Makefile +++ japanese/jed/Makefile @@ -25,14 +25,14 @@ CONFIGURE_ENV= JED_ROOT="${JED_ROOT}" X_EXTRA_LIBS="-lcurses" CONFIGURE_ARGS= --enable-x-locale=no ALL_TARGET= ${BINSTUFF} getmail -MAKE_JOBS_UNSAFE= yes +MAKE_JOBS_UNSAFE= yes INFO= jed JED_ROOT= ${DATADIR} BINSTUFF= jed rgrep OPTIONS_DEFINE= DOCS X11 CANNA -OPTIONS_DEFAULT= CANNA X11 +OPTIONS_DEFAULT=CANNA X11 OPTIONS_SUB= yes CANNA_DESC= Canna support @@ -53,7 +53,7 @@ _INFODIR= ${WRKSRC}/info _LIBDIR= ${WRKSRC}/lib -PORTDOCS= abbrev.txt color.txt dfa.txt edt.txt emacs.txt fold.txt \ +PORTDOCS= abbrev.txt color.txt dfa.txt edt.txt emacs.txt fold.txt \ hooks.txt ide-mode.txt jed_faq.txt jedfuns.txt libfuns.txt \ menus.txt mouse.txt pc-keys.txt program.txt rgrep.txt \ rmail.txt script.txt slangfun.txt syntax.txt undo.txt wjed.txt \ Index: java/jboss71/Makefile =================================================================== --- java/jboss71/Makefile +++ java/jboss71/Makefile @@ -19,16 +19,16 @@ GH_TAGNAME= 7.1.3.Final GH_COMMIT= f1f5122 -USE_RC_SUBR= jboss71 +USE_RC_SUBR= jboss71 USE_JAVA= yes JAVA_VERSION= 1.6+ USER= www GROUP= www -VAR_DIR?= /var -LOG_DIR?= ${VAR_DIR}/log/${PORTNAME} -DEPLOY_DIR?= ${VAR_DIR}/${PORTNAME} -PID_FILE= /var/run/${PORTNAME}.pid -JBOSSOUTPUT= ${WRKSRC}/build/target/${DISTNAME} +VAR_DIR?= /var +LOG_DIR?= ${VAR_DIR}/log/${PORTNAME} +DEPLOY_DIR?= ${VAR_DIR}/${PORTNAME} +PID_FILE= /var/run/${PORTNAME}.pid +JBOSSOUTPUT= ${WRKSRC}/build/target/${DISTNAME} SUB_LIST= APP_SHORTNAME=${PORTNAME} \ LOG_DIR=${LOG_DIR} \ Index: java/jboss72/Makefile =================================================================== --- java/jboss72/Makefile +++ java/jboss72/Makefile @@ -21,16 +21,16 @@ GH_TAGNAME= 7.2.0.Final GH_COMMIT= 4ed76ce -USE_RC_SUBR= jboss72 +USE_RC_SUBR= jboss72 USE_JAVA= yes JAVA_VERSION= 1.6+ USER= www GROUP= www -VAR_DIR?= /var -LOG_DIR?= ${VAR_DIR}/log/${PORTNAME} -DEPLOY_DIR?= ${VAR_DIR}/${PORTNAME} -PID_FILE= /var/run/${PORTNAME}.pid -JBOSSOUTPUT= ${WRKSRC}/build/target/${DISTNAME} +VAR_DIR?= /var +LOG_DIR?= ${VAR_DIR}/log/${PORTNAME} +DEPLOY_DIR?= ${VAR_DIR}/${PORTNAME} +PID_FILE= /var/run/${PORTNAME}.pid +JBOSSOUTPUT= ${WRKSRC}/build/target/${DISTNAME} SUB_LIST= APP_SHORTNAME=${PORTNAME} \ LOG_DIR=${LOG_DIR} \ Index: lang/dragonegg46-33/Makefile =================================================================== --- lang/dragonegg46-33/Makefile +++ lang/dragonegg46-33/Makefile @@ -45,7 +45,7 @@ .include .if ${COMPILER_FEATURES:Mlibc++} -IGNORE= "Dragonegg can't work if LLVM was built with libc++" +IGNORE= "Dragonegg can't work if LLVM was built with libc++" .endif post-patch: Index: lang/gcc-aux/Makefile =================================================================== --- lang/gcc-aux/Makefile +++ lang/gcc-aux/Makefile @@ -7,7 +7,7 @@ CATEGORIES= lang MASTER_SITES= http://downloads.dragonlace.net/src/:boot \ LOCAL/marino:boot ${MASTER_SITE_GCC} -MASTER_SITE_SUBDIR= ${MS_SUBDIR} +MASTER_SITE_SUBDIR= ${MS_SUBDIR} DISTFILES= ${IDENTIFICATION}.tar.bz2 MAINTAINER= marino@FreeBSD.org @@ -29,7 +29,7 @@ NO_MTREE= yes OPTIONS_GROUP= Standard Bootstrap -OPTIONS_GROUP_Standard= FORT OBJC NLS TESTSUITE STATIC +OPTIONS_GROUP_Standard= FORT OBJC NLS TESTSUITE STATIC OPTIONS_GROUP_Bootstrap=BOOTSTRAP OPTIONS_DEFAULT= FORT OBJC NO_OPTIONS_SORT= yes @@ -108,7 +108,7 @@ # for port maintenance, invoke "make makesum PLUS_BOOTSTRAPS=1" .if defined(PLUS_BOOTSTRAPS) -DISTFILES= \ +DISTFILES= \ ${IDENTIFICATION}.tar.bz2 \ ada-bootstrap.i386.dragonfly.36A.tar.bz2:boot \ ada-bootstrap.i386.freebsd.84.tar.bz2:boot \ Index: lang/gnatdroid-sysroot/Makefile =================================================================== --- lang/gnatdroid-sysroot/Makefile +++ lang/gnatdroid-sysroot/Makefile @@ -19,9 +19,9 @@ WRKSRC= ${WRKDIR}/android-${API}-arm PREFIX= ${LOCALBASE}/android -OPTIONS_SINGLE= SG1 -OPTIONS_SINGLE_SG1= FROYO GBREAD ICS JBEAN16 JBEAN17 JBEAN18 KITKAT -OPTIONS_DEFAULT= JBEAN16 +OPTIONS_SINGLE= SG1 +OPTIONS_SINGLE_SG1= FROYO GBREAD ICS JBEAN16 JBEAN17 JBEAN18 KITKAT +OPTIONS_DEFAULT= JBEAN16 FROYO_DESC= Android 2.2 - API level 08 - Froyo GBREAD_DESC= Android 2.3 - API level 09 - Gingerbread 1 @@ -34,21 +34,21 @@ .include .if ${PORT_OPTIONS:MFROYO} -API= 8 +API= 8 .elif ${PORT_OPTIONS:MGBREAD} -API= 9 +API= 9 .elif ${PORT_OPTIONS:MICS} -API= 15 +API= 15 .elif ${PORT_OPTIONS:MJBEAN16} -API= 16 +API= 16 .elif ${PORT_OPTIONS:MJBEAN17} -API= 17 +API= 17 .elif ${PORT_OPTIONS:MJBEAN18} -API= 18 +API= 18 .elif ${PORT_OPTIONS:MKITKAT} -API= 19 +API= 19 .else -IGNORE= the API option is improperly selected +IGNORE= the API option is improperly selected .endif do-install: Index: lang/sdcc-devel/Makefile =================================================================== --- lang/sdcc-devel/Makefile +++ lang/sdcc-devel/Makefile @@ -20,7 +20,7 @@ GNU_CONFIGURE= yes USES= gmake tar:bzip2 -OPTIONS_DEFINE= DEVLIB DOCS UCSIM +OPTIONS_DEFINE= DEVLIB DOCS UCSIM OPTIONS_MULTI= TARGETS OPTIONS_MULTI_TARGETS= HC08 MCS51 PIC STM8 Z80 OPTIONS_DEFAULT= DEVLIB UCSIM HC08 MCS51 PIC STM8 Z80 @@ -33,12 +33,12 @@ Z80_DESC= Zilog Z80/Z180/GBZ80, Rabbit 2000/3000, Toshiba TLCS-90 CPPFLAGS+= -idirafter ${LOCALBASE}/include -CONFIGURE_ARGS= --disable-avr --disable-install-libbfd --disable-werror \ +CONFIGURE_ARGS= --disable-avr --disable-install-libbfd --disable-werror \ --disable-st7 docdir=${DOCSDIR} sdcc_cv_c_fms_extensions=no CONFIGURE_ENV= ARCH="" PORTDATA= * PORTDOCS= * -WRKSRC= ${WRKDIR}/sdcc +WRKSRC= ${WRKDIR}/sdcc OPTIONS_SUB= yes DEVLIB_CONFIGURE_OFF= --disable-device-lib Index: lang/sdcc/Makefile =================================================================== --- lang/sdcc/Makefile +++ lang/sdcc/Makefile @@ -17,7 +17,7 @@ GNU_CONFIGURE= yes USES= gmake tar:bzip2 -OPTIONS_DEFINE= DEVLIB DOCS UCSIM +OPTIONS_DEFINE= DEVLIB DOCS UCSIM OPTIONS_MULTI= TARGETS OPTIONS_MULTI_TARGETS= HC08 MCS51 PIC STM8 Z80 OPTIONS_DEFAULT= DEVLIB UCSIM HC08 MCS51 PIC STM8 Z80 @@ -30,12 +30,12 @@ Z80_DESC= Zilog Z80/Z180/GBZ80, Rabbit 2000/3000, Toshiba TLCS-90 CPPFLAGS+= -idirafter ${LOCALBASE}/include -CONFIGURE_ARGS= --disable-avr --disable-install-libbfd --disable-werror \ +CONFIGURE_ARGS= --disable-avr --disable-install-libbfd --disable-werror \ --disable-st7 docdir=${DOCSDIR} sdcc_cv_c_fms_extensions=no CONFIGURE_ENV= ARCH="" PORTDATA= * PORTDOCS= * -WRKSRC= ${WRKDIR}/sdcc-${DISTVERSION} +WRKSRC= ${WRKDIR}/sdcc-${DISTVERSION} OPTIONS_SUB= yes DEVLIB_CONFIGURE_OFF= --disable-device-lib Index: mail/crm114/Makefile =================================================================== --- mail/crm114/Makefile +++ mail/crm114/Makefile @@ -17,7 +17,7 @@ MAINTAINER= chalpin@cs.wisc.edu COMMENT= A Markov based SpamFilter -LICENSE= GPLv2 +LICENSE= GPLv2 LIB_DEPENDS= libtre.so:${PORTSDIR}/textproc/libtre @@ -26,8 +26,8 @@ USES= gettext iconv USE_CSTD=gnu89 -OPTIONS_DEFINE= NORMALIZEMIME -NORMALIZEMIME_DESC= Normalize MIME encoding +OPTIONS_DEFINE= NORMALIZEMIME +NORMALIZEMIME_DESC= Normalize MIME encoding MAKE_ARGS= CC="${CC}" prefix="${STAGEDIR}${PREFIX}" \ LIBS="${LIBS}" \ Index: mail/ssmtp/Makefile =================================================================== --- mail/ssmtp/Makefile +++ mail/ssmtp/Makefile @@ -3,7 +3,7 @@ PORTNAME= ssmtp PORTVERSION= 2.64 -PORTREVISION= 1 +PORTREVISION= 1 CATEGORIES= mail ipv6 MASTER_SITES= ${MASTER_SITE_DEBIAN_POOL} DISTFILES= ${PORTNAME}_${PORTVERSION}.orig${EXTRACT_SUFX} @@ -26,12 +26,12 @@ LDFLAGS+= -L${OPENSSLLIB} MAILERCONF= /etc/mail/mailer.conf -OPTIONS_DEFINE= LOGFILE IPV6 USERPREFS XORIGIP CRAMMD5 OPENSSL -OPTIONS_DEFAULT= XORIGIP CRAMMD5 OPENSSL -LOGFILE_DESC= Log file -USERPREFS_DESC= User-defined revaliases -XORIGIP_DESC= X-Originating-IP header for REMOTE_ADDR envvar -CRAMMD5_DESC= CRAM-MD5 authentication support +OPTIONS_DEFINE= LOGFILE IPV6 USERPREFS XORIGIP CRAMMD5 OPENSSL +OPTIONS_DEFAULT=XORIGIP CRAMMD5 OPENSSL +LOGFILE_DESC= Log file +USERPREFS_DESC= User-defined revaliases +XORIGIP_DESC= X-Originating-IP header for REMOTE_ADDR envvar +CRAMMD5_DESC= CRAM-MD5 authentication support LOGFILE_CONFIGURE_ON= --enable-logfile XORIGIP_EXTRA_PATCHES= ${FILESDIR}/remote-addr.patch Index: mail/tlb/Makefile =================================================================== --- mail/tlb/Makefile +++ mail/tlb/Makefile @@ -2,7 +2,7 @@ # $FreeBSD$ PORTNAME= tlb -PORTVERSION= 0.11a +PORTVERSION= 0.11a CATEGORIES= mail perl5 MASTER_SITES= ftp://ftp.hpc.uh.edu/pub/tlb/ \ http://www.freenix.no/~anders/ \ Index: math/sedumi/Makefile =================================================================== --- math/sedumi/Makefile +++ math/sedumi/Makefile @@ -2,7 +2,7 @@ # $FreeBSD$ PORTNAME= sedumi -PORTVERSION= 1.1 +PORTVERSION= 1.1 PORTREVISION= 7 CATEGORIES= math MASTER_SITES= ${MASTER_SITE_LOCAL:S|%SUBDIR%|maho/sedumi|} Index: misc/freebsd-doc-en/Makefile =================================================================== --- misc/freebsd-doc-en/Makefile +++ misc/freebsd-doc-en/Makefile @@ -24,7 +24,7 @@ DOCOWN=${SHAREOWN} \ DOCGRP=${SHAREGRP} MAKE_JOBS_UNSAFE= yes -DESTDIRNAME= ${STAGEDIR}${PREFIX}/${DOCBASE} +DESTDIRNAME= ${STAGEDIR}${PREFIX}/${DOCBASE} PLIST= ${WRKDIR}/pkg-plist DOCLANG?= en_US.ISO8859-1 Index: misc/gnome-osd/Makefile =================================================================== --- misc/gnome-osd/Makefile +++ misc/gnome-osd/Makefile @@ -11,7 +11,7 @@ MAINTAINER= ports@FreeBSD.org COMMENT= On-Screen-Display infrastructure using Pango text rendering -USES= pathfix gmake pkgconfig +USES= pathfix gmake pkgconfig USE_GNOME= gnomeprefix intlhack pygnome2 USE_PYTHON= yes GNU_CONFIGURE= yes Index: misc/usbrh-libusb/Makefile =================================================================== --- misc/usbrh-libusb/Makefile +++ misc/usbrh-libusb/Makefile @@ -17,7 +17,7 @@ .include .if ${OSVERSION} <= 800097 -BROKEN= does not build +BROKEN= does not build .endif do-install: Index: multimedia/cx88/Makefile =================================================================== --- multimedia/cx88/Makefile +++ multimedia/cx88/Makefile @@ -49,7 +49,7 @@ MAKE_ARGS+= DEFAULT_XML_CONFIG="${EXAMPLESDIR}/cx88.xml.sample" .if (${OSVERSION} < 802513) || ((${OSVERSION} >= 900000) && (${OSVERSION} < 900041)) -IGNORE= requires kernel support for DRIVER_MODULE_ORDERED macro (FreeBSD 8.3+, FreeBSD 9.0+) +IGNORE= requires kernel support for DRIVER_MODULE_ORDERED macro (FreeBSD 8.3+, FreeBSD 9.0+) .endif .if !exists(${SRC_BASE}/sys/Makefile) Index: multimedia/pvrxxx/Makefile =================================================================== --- multimedia/pvrxxx/Makefile +++ multimedia/pvrxxx/Makefile @@ -37,7 +37,7 @@ .endif .if !exists(${DISTDIR}/HcwMakoA.ROM) -IGNORE= you need the file HcwMakoA.ROM from the CD coming with the PVR-150/500 card. Please place this file in ${DISTDIR} and run make again. Check http://ivtvdriver.org/index.php/Firmware for the recommended version +IGNORE= you need the file HcwMakoA.ROM from the CD coming with the PVR-150/500 card. Please place this file in ${DISTDIR} and run make again. Check http://ivtvdriver.org/index.php/Firmware for the recommended version .endif .if !exists(${SRC_BASE}/sys/dev/iicbus/iicbb.c) Index: net-mgmt/zenpack-checkping/Makefile =================================================================== --- net-mgmt/zenpack-checkping/Makefile +++ net-mgmt/zenpack-checkping/Makefile @@ -17,7 +17,7 @@ ZPACKPREFIX= ZenPacks.Nagios. ZPACKGROUP= community WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} -TAG= 0088e17 +TAG= 0088e17 NO_STAGE= yes .include Index: net-mgmt/zenpack-dellmon/Makefile =================================================================== --- net-mgmt/zenpack-dellmon/Makefile +++ net-mgmt/zenpack-dellmon/Makefile @@ -17,7 +17,7 @@ ZPACKGROUP= community WRKSRC= ${WRKDIR}/epuzanov-${ZPACKPREFIX}${PORTNAME}-a4ae347 -ZPACKPREFIX= ZenPacks.community. +ZPACKPREFIX= ZenPacks.community. NO_STAGE= yes .include Index: net-mgmt/zenpack-graphportlet/Makefile =================================================================== --- net-mgmt/zenpack-graphportlet/Makefile +++ net-mgmt/zenpack-graphportlet/Makefile @@ -4,8 +4,8 @@ PORTNAME= ShowGraphPortlet PORTVERSION= 1.03 CATEGORIES= net-mgmt www -MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ -DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ +DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} MAINTAINER= ports@FreeBSD.org COMMENT= Enables users to show any graph/multi graph reports on their dashboard @@ -16,8 +16,8 @@ ZPACKGROUP= community ZPACKPREFIX= ZenPacks.SCC. -WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} -TAG= 0cf7678 +WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +TAG= 0cf7678 NO_STAGE= yes .include Index: net-mgmt/zenpack-interfacegraphs/Makefile =================================================================== --- net-mgmt/zenpack-interfacegraphs/Makefile +++ net-mgmt/zenpack-interfacegraphs/Makefile @@ -4,8 +4,8 @@ PORTNAME= InterfaceGraphs PORTVERSION= 1.0 CATEGORIES= net-mgmt -MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ -DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ +DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} MAINTAINER= ports@FreeBSD.org COMMENT= Provides a link that graphs all network interfaces for a device @@ -16,8 +16,8 @@ ZPACKGROUP= community ZPACKPREFIX= ZenPacks.community. -WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} -TAG= 7ed2d7d +WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +TAG= 7ed2d7d NO_STAGE= yes .include Index: net-mgmt/zenpack-libvirt/Makefile =================================================================== --- net-mgmt/zenpack-libvirt/Makefile +++ net-mgmt/zenpack-libvirt/Makefile @@ -5,8 +5,8 @@ PORTVERSION= 1.96 PORTREVISION= 4 CATEGORIES= net-mgmt -MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ -DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +MASTER_SITES= https://github.com/zenoss/${ZPACKPREFIX}${PORTNAME}/tarball/master/ +DISTNAME= zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} MAINTAINER= ports@FreeBSD.org COMMENT= Provides monitoring of virtualization servers through Zenoss @@ -21,8 +21,8 @@ ZPACKPREFIX= ZenPacks.community. ZPACKGROUP= community -WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} -TAG= 4113cfe +WRKSRC= ${WRKDIR}/zenoss-${ZPACKPREFIX}${PORTNAME}-${TAG} +TAG= 4113cfe NO_STAGE= yes .include Index: net/iscsi-target/Makefile =================================================================== --- net/iscsi-target/Makefile +++ net/iscsi-target/Makefile @@ -7,7 +7,7 @@ CATEGORIES= net MASTER_SITES= ftp://ftp.netbsd.org/pub/pkgsrc/distfiles/ \ http://www.magnesium.net/~mdf/distfiles/ -PKGNAMESUFFIX= -target +PKGNAMESUFFIX= -target DISTNAME= netbsd-iscsi-${PORTVERSION} MAINTAINER= mark@foster.cc Index: net/pbnc/Makefile =================================================================== --- net/pbnc/Makefile +++ net/pbnc/Makefile @@ -18,7 +18,7 @@ USE_PERL5= run NO_BUILD= yes PLIST_FILES= etc/pbnc.cfg bin/pbnc.pl -PORTDOCS= pbnc.readme +PORTDOCS= pbnc.readme OPTIONS_DEFINE= DOCS Index: net/tshark-lite/Makefile =================================================================== --- net/tshark-lite/Makefile +++ net/tshark-lite/Makefile @@ -5,6 +5,6 @@ PKGNAMESUFFIX= -lite MASTERDIR= ${.CURDIR}/../tshark -COMMENT= A powerful network analyzer/capture tool (lite package) +COMMENT= A powerful network analyzer/capture tool (lite package) .include "${MASTERDIR}/Makefile" Index: net/wireshark-lite/Makefile =================================================================== --- net/wireshark-lite/Makefile +++ net/wireshark-lite/Makefile @@ -5,6 +5,6 @@ PKGNAMESUFFIX= -lite MASTERDIR= ${.CURDIR}/../wireshark -COMMENT= A powerful network analyzer/capture tool (lite package) +COMMENT= A powerful network analyzer/capture tool (lite package) .include "${MASTERDIR}/Makefile" Index: print/latex-pgf/Makefile =================================================================== --- print/latex-pgf/Makefile +++ print/latex-pgf/Makefile @@ -17,7 +17,7 @@ PLIST_SUB= MKTEXLSR=${MKTEXLSR} \ CLASSDIR=${CLASSDIR} \ TEXMFDIR=${TEXMFDIR} -PORTDOCS= AUTHORS ChangeLog FILES INSTALL README TODO images licenses \ +PORTDOCS= AUTHORS ChangeLog FILES INSTALL README TODO images licenses \ macros pgfmanual.pdf text-en version-for-dvipdfm \ version-for-dvipdfmx version-for-dvips \ version-for-pdftex version-for-tex4ht version-for-vtex \ Index: science/gamess/Makefile =================================================================== --- science/gamess/Makefile +++ science/gamess/Makefile @@ -2,10 +2,10 @@ # $FreeBSD$ PORTNAME= gamess -PORTVERSION= ${SNAPDATE} +PORTVERSION= ${SNAPDATE} PORTREVISION= 1 CATEGORIES= science -MASTER_SITES= #http://www.msg.ameslab.gov/GAMESS/License_Agreement.html +MASTER_SITES= #http://www.msg.ameslab.gov/GAMESS/License_Agreement.html DISTNAME= gamess-current DIST_SUBDIR= ${PORTNAME}/${PORTVERSION} @@ -13,7 +13,7 @@ COMMENT= A freely obtainable ab-initio molecular orbital calculation program USES= fortran gmake -WRKSRC= ${WRKDIR}/gamess +WRKSRC= ${WRKDIR}/gamess SNAPDATE= 20130501.1 RESTRICTED= No Redistribution @@ -52,23 +52,23 @@ .if defined(WITH_OPTIMIZED_FLAGS) .if ${ARCH} == "amd64" -CFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time -FFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time +CFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time +FFLAGS+= -pipe -O3 -ffast-math -funroll-all-loops -fpeel-loops -ftracer -funswitch-loops -funit-at-a-time .elif ${ARCH} == "i386" -CFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 -FFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 +CFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 +FFLAGS+= -pipe -O3 -ffast-math -finline-functions -fomit-frame-pointer -funroll-loops -fexpensive-optimizations -malign-double -mcpu=i686 -march=i686 -mfancy-math-387 .endif .endif -#WITH_IFC= yes #currently building with ifc is broken +#WITH_IFC= yes #currently building with ifc is broken .if defined(WITH_IFC) -FC= ${LOCALBASE}/intel_fc_80/bin/ifort -F77= ${LOCALBASE}/intel_fc_80/bin/ifort -CC= ${LOCALBASE}/intel_cc_80/bin/icc -FFLAGS= -axP -xW -ipo -O3 -Vaxlib -CFLAGS= -axP -xW -ipo -O3 -Vaxlib +FC= ${LOCALBASE}/intel_fc_80/bin/ifort +F77= ${LOCALBASE}/intel_fc_80/bin/ifort +CC= ${LOCALBASE}/intel_cc_80/bin/icc +FFLAGS= -axP -xW -ipo -O3 -Vaxlib +CFLAGS= -axP -xW -ipo -O3 -Vaxlib LIBSVM= -lsvml -LIBG2C= -lg2c +LIBG2C= -lg2c .else LIBG2C= LIBSVM= Index: science/vmd/Makefile =================================================================== --- science/vmd/Makefile +++ science/vmd/Makefile @@ -55,7 +55,7 @@ # Check for VMD sources .if !exists(${DISTDIR}/${VMD_DIST}) -IGNORE= Because of licensing restrictions, you must fetch the source distribution manually. Please access http://www.ks.uiuc.edu/Development/Download/download.cgi?PackageName=VMD with a web browser. You will be required to log in and register, but you can create an account on this page. After registration and accepting the University of Illinois agreement, download the source file, ${VMD_DIST}. Please place this file in ${DISTDIR}, and re-run make +IGNORE= Because of licensing restrictions, you must fetch the source distribution manually. Please access http://www.ks.uiuc.edu/Development/Download/download.cgi?PackageName=VMD with a web browser. You will be required to log in and register, but you can create an account on this page. After registration and accepting the University of Illinois agreement, download the source file, ${VMD_DIST}. Please place this file in ${DISTDIR}, and re-run make .endif do-extract: Index: security/fpm2/Makefile =================================================================== --- security/fpm2/Makefile +++ security/fpm2/Makefile @@ -31,7 +31,7 @@ .include # Restrict to stable (even) versions, indicated by the second component. -PORTSCOUT= limit:^0.7\..* +PORTSCOUT= limit:^0.7\..* post-configure: @${REINPLACE_CMD} -e \ Index: security/gpass/Makefile =================================================================== --- security/gpass/Makefile +++ security/gpass/Makefile @@ -18,7 +18,7 @@ MAN1= gpass.1 gpass.ja.1 gpass-convert.1 gpass-convert.ja.1 -USES= pathfix gmake pkgconfig +USES= pathfix gmake pkgconfig USE_GNOME= gnomeprefix gtk20 libgnomeui intltool libglade2 GCONF_SCHEMAS= gpass.schemas Index: security/libpwstor/Makefile =================================================================== --- security/libpwstor/Makefile +++ security/libpwstor/Makefile @@ -1,17 +1,17 @@ # Created by: Matt Harris # $FreeBSD$ -PORTNAME= libpwstor -PORTVERSION= 0.1 -CATEGORIES= security devel -MASTER_SITES= SF/kageki/${PORTNAME}/${PORTNAME}-${PORTVERSION} - -MAINTAINER= ports@FreeBSD.org -COMMENT= Password storage library for C programmers - -USE_BZIP2= yes -USE_LDCONFIG= yes -GNU_CONFIGURE= yes +PORTNAME= libpwstor +PORTVERSION= 0.1 +CATEGORIES= security devel +MASTER_SITES= SF/kageki/${PORTNAME}/${PORTNAME}-${PORTVERSION} + +MAINTAINER= ports@FreeBSD.org +COMMENT= Password storage library for C programmers + +USE_BZIP2= yes +USE_LDCONFIG= yes +GNU_CONFIGURE= yes PLIST_FILES= bin/pwtool \ include/pwstor.h \ @@ -43,7 +43,7 @@ .endif .if defined(WITH_DEBUG) -CONFIGURE_ARGS+= --enable-debug +CONFIGURE_ARGS+=--enable-debug .endif .include Index: security/openvpn-devel/Makefile =================================================================== --- security/openvpn-devel/Makefile +++ security/openvpn-devel/Makefile @@ -17,67 +17,67 @@ CONFLICTS_INSTALL= openvpn-[0-9]* openvpn-beta-[0-9]* -GNU_CONFIGURE= yes -USES= libtool pkgconfig shebangfix tar:xz -SHEBANG_FILES= sample/sample-scripts/verify-cn \ - sample/sample-scripts/auth-pam.pl \ - sample/sample-scripts/ucn.pl +GNU_CONFIGURE= yes +USES= libtool pkgconfig shebangfix tar:xz +SHEBANG_FILES= sample/sample-scripts/verify-cn \ + sample/sample-scripts/auth-pam.pl \ + sample/sample-scripts/ucn.pl # let OpenVPN's configure script pick up the requisite libraries: -CPPFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib +CPPFLAGS+= -I${LOCALBASE}/include +LDFLAGS+= -L${LOCALBASE}/lib -OPTIONS_DEFINE= PW_SAVE PKCS11 EASYRSA LZO SNAPPY -OPTIONS_DEFAULT= EASYRSA OPENSSL -OPTIONS_SINGLE= SSL -OPTIONS_SINGLE_SSL= OPENSSL POLARSSL -PW_SAVE_DESC= Interactive passwords may be read from a file -SNAPPY_DESC= Enable the Snappy compression library -LZO_DESC= Enable the LZO compression library -PKCS11_DESC= Use security/pkcs11-helper -EASYRSA_DESC= Install security/easy-rsa RSA helper package -POLARSSL_DESC= SSL/TLS support via PolarSSL +OPTIONS_DEFINE= PW_SAVE PKCS11 EASYRSA LZO SNAPPY +OPTIONS_DEFAULT= EASYRSA OPENSSL +OPTIONS_SINGLE= SSL +OPTIONS_SINGLE_SSL= OPENSSL POLARSSL +PW_SAVE_DESC= Interactive passwords may be read from a file +SNAPPY_DESC= Enable the Snappy compression library +LZO_DESC= Enable the LZO compression library +PKCS11_DESC= Use security/pkcs11-helper +EASYRSA_DESC= Install security/easy-rsa RSA helper package +POLARSSL_DESC= SSL/TLS support via PolarSSL -EASYRSA_RUN_DEPENDS= easy-rsa>=0:${PORTSDIR}/security/easy-rsa +EASYRSA_RUN_DEPENDS= easy-rsa>=0:${PORTSDIR}/security/easy-rsa -PKCS11_LIB_DEPENDS= libpkcs11-helper.so:${PORTSDIR}/security/pkcs11-helper -PKCS11_CONFIGURE_ENABLE= pkcs11 +PKCS11_LIB_DEPENDS= libpkcs11-helper.so:${PORTSDIR}/security/pkcs11-helper +PKCS11_CONFIGURE_ENABLE= pkcs11 -PW_SAVE_CONFIGURE_ENABLE= password-save +PW_SAVE_CONFIGURE_ENABLE= password-save .include .if ${PORT_OPTIONS:MPOLARSSL} -LIB_DEPENDS+= libpolarssl.so:${PORTSDIR}/security/polarssl -CONFIGURE_ARGS+= --with-crypto-library=polarssl +LIB_DEPENDS+= libpolarssl.so:${PORTSDIR}/security/polarssl +CONFIGURE_ARGS+=--with-crypto-library=polarssl .else -USE_OPENSSL= yes -CONFIGURE_ARGS+= --with-crypto-library=openssl +USE_OPENSSL= yes +CONFIGURE_ARGS+=--with-crypto-library=openssl .endif -USE_RC_SUBR= openvpn -USE_LDCONFIG= ${PREFIX}/lib +USE_RC_SUBR= openvpn +USE_LDCONFIG= ${PREFIX}/lib -SUB_FILES= pkg-message +SUB_FILES= pkg-message .ifdef (LOG_OPENVPN) -CFLAGS+= -DLOG_OPENVPN=${LOG_OPENVPN} +CFLAGS+= -DLOG_OPENVPN=${LOG_OPENVPN} .endif .if ${PORT_OPTIONS:MLZO} -LIB_DEPENDS+= liblzo2.so:${PORTSDIR}/archivers/lzo2 +LIB_DEPENDS+= liblzo2.so:${PORTSDIR}/archivers/lzo2 .else -CONFIGURE_ARGS+= --disable-lzo +CONFIGURE_ARGS+=--disable-lzo .endif .if ${PORT_OPTIONS:MSNAPPY} -LIB_DEPENDS+= snappy:${PORTSDIR}/archivers/snappy +LIB_DEPENDS+= snappy:${PORTSDIR}/archivers/snappy .else -CONFIGURE_ARGS+= --disable-snappy +CONFIGURE_ARGS+=--disable-snappy .endif -PORTDOCS= * -PORTEXAMPLES= * +PORTDOCS= * +PORTEXAMPLES= * pre-configure: .ifdef (LOG_OPENVPN) Index: security/sshguard-ipfilter/Makefile =================================================================== --- security/sshguard-ipfilter/Makefile +++ security/sshguard-ipfilter/Makefile @@ -4,7 +4,7 @@ PKGNAMESUFFIX= -ipfilter CONFLICTS= sshguard-1.* sshguard-ipfw-1.* sshguard-pf-1.* -COMMENT= Protect hosts from brute force attacks against ssh and other services using ipfilter +COMMENT= Protect hosts from brute force attacks against ssh and other services using ipfilter SSHGUARDFW= ipfilter MASTERDIR= ${.CURDIR}/../sshguard Index: shells/ch/Makefile =================================================================== --- shells/ch/Makefile +++ shells/ch/Makefile @@ -18,7 +18,7 @@ DATADIR= ${PREFIX}/${PORTNAME} SUB_FILES= ${PORTNAME} -PORTDATA= README bin config demos dl extern include lib license package sbin toolkit +PORTDATA= README bin config demos dl extern include lib license package sbin toolkit post-extract: @${MKDIR} ${WRKSRC}/ch Index: sysutils/bsdadminscripts/Makefile =================================================================== --- sysutils/bsdadminscripts/Makefile +++ sysutils/bsdadminscripts/Makefile @@ -37,7 +37,7 @@ MLINKS+= ${RC_SCRIPTS:S,^,rc,:S,$,.1,:S,^,rcstart.1 ,} \ ${PORT_SCRIPTS:S,^,port,:S,$,.1,:S,^,portconfig.1 ,} .else -EVALDOCS= -nodoc +EVALDOCS= -nodoc .endif plist: patch Index: sysutils/linux-f10-procps/Makefile =================================================================== --- sysutils/linux-f10-procps/Makefile +++ sysutils/linux-f10-procps/Makefile @@ -20,7 +20,7 @@ BRANDELF_DIRS= bin sbin usr/bin PLIST_SUB+= PORTVERSION="${PORTVERSION}" -PROCFS= /compat/linux/proc +PROCFS= /compat/linux/proc post-install: @df ${PROCFS} 2>&1 | ${EGREP} '^linprocfs ' > /dev/null 2>&1 || (echo ">>>" ; echo ">>> You still need to mount ${PROCFS}; see linprocfs(5)" ; echo ">>> for more information" ; echo ">>>") Index: sysutils/syslog-ng-incubator/Makefile =================================================================== --- sysutils/syslog-ng-incubator/Makefile +++ sysutils/syslog-ng-incubator/Makefile @@ -17,7 +17,7 @@ LIB_DEPENDS= libevtlog.so:${PORTSDIR}/sysutils/eventlog LIB_DEPENDS= libsyslog-ng-3.5.4.1.so:${PORTSDIR}/sysutils/syslog-ng-devel -USES= gmake pkgconfig pathfix bison lua tar:xz +USES= gmake pkgconfig pathfix bison lua tar:xz USE_LDCONFIG= yes GNU_CONFIGURE= yes USE_GNOME= glib20 Index: sysutils/tarsnap/Makefile =================================================================== --- sysutils/tarsnap/Makefile +++ sysutils/tarsnap/Makefile @@ -25,7 +25,7 @@ # safety check to ensure that we don't violate the license .if exists(${PATCHDIR}) -RESTRICTED= license only allows redistribution and use of unmodified source and binaries +RESTRICTED= license only allows redistribution and use of unmodified source and binaries .endif LEGAL_TEXT= license restricts redistribution of source and binaries Index: textproc/coco/Makefile =================================================================== --- textproc/coco/Makefile +++ textproc/coco/Makefile @@ -1,20 +1,20 @@ # Created by: Teruaki Ata # $FreeBSD$ -PORTNAME= coco -PORTVERSION= ${MULE_VERSION} +PORTNAME= coco +PORTVERSION= ${MULE_VERSION} PORTREVISION= 1 -CATEGORIES= textproc +CATEGORIES= textproc MASTER_SITES= ftp://ftp.jaist.ac.jp/pub/GNU/mule/ \ http://www.infonets.hiroshima-u.ac.jp/~taoka/FreeBSD/mule/ DISTFILES= mule-${MULE_VERSION}-${EMACS_VERSION}.tar.gz \ mule-${MULE_VERSION}-${EMACS_VERSION}.patch-981002.tar.gz -MAINTAINER= PFA03027@nifty.ne.jp +MAINTAINER= PFA03027@nifty.ne.jp COMMENT= Code converter for any of Mule's code -MAN1= coco.1 m2ps.1 -MANCOMPRESSED= no +MAN1= coco.1 m2ps.1 +MANCOMPRESSED= no WRKSRC= ${WRKDIR}/mule-${MULE_VERSION}-${EMACS_VERSION} GNU_CONFIGURE= yes Index: textproc/plover/Makefile =================================================================== --- textproc/plover/Makefile +++ textproc/plover/Makefile @@ -4,7 +4,7 @@ PORTVERSION= 2.2.0 CATEGORIES= textproc MASTER_SITES= http://launchpadlibrarian.net/88624187/ -PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} +PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} MAINTAINER= olgeni@FreeBSD.org COMMENT= Open source solution for stenography Index: www/chtml/Makefile =================================================================== --- www/chtml/Makefile +++ www/chtml/Makefile @@ -1,14 +1,14 @@ # Created by: David Bushong # $FreeBSD$ -PORTNAME= chtml -PORTVERSION= 0.0 -CATEGORIES= www devel lang -MASTER_SITES= http://people.delphiforums.com/gjc/ -DISTNAME= chtml -EXTRACT_SUFX= .tgz +PORTNAME= chtml +PORTVERSION= 0.0 +CATEGORIES= www devel lang +MASTER_SITES= http://people.delphiforums.com/gjc/ +DISTNAME= chtml +EXTRACT_SUFX= .tgz -MAINTAINER= ports@FreeBSD.org +MAINTAINER= ports@FreeBSD.org COMMENT= Chunked HTML templating engine BUILD_DEPENDS= ${LOCALBASE}/bin/csiod:${PORTSDIR}/lang/siod Index: www/mod_log_config-st/Makefile =================================================================== --- www/mod_log_config-st/Makefile +++ www/mod_log_config-st/Makefile @@ -13,7 +13,7 @@ LICENSE= APACHE11 -USES= tar:xz +USES= tar:xz USE_APACHE= 22 AP_FAST_BUILD= yes SRC_FILE= mod_log_config.c Index: www/mod_log_mysql/Makefile =================================================================== --- www/mod_log_mysql/Makefile +++ www/mod_log_mysql/Makefile @@ -17,7 +17,7 @@ LICENSE_TEXT_PUBLIC_DOMAIN= mod_log_mysql.c is in the Public Domain as of 2003.10.23. LICENSE_PERMS_PUBLIC_DOMAIN= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept -USES= tar:xz +USES= tar:xz RUN_DEPENDS+= ${LOCALBASE}/${APACHEMODDIR}/mod_log_config-st.so:${PORTSDIR}/www/mod_log_config-st USE_APACHE= 22 Index: www/p5-HTTP-Daemon/Makefile =================================================================== --- www/p5-HTTP-Daemon/Makefile +++ www/p5-HTTP-Daemon/Makefile @@ -10,8 +10,8 @@ MAINTAINER= perl@FreeBSD.org COMMENT= Simple HTTP server class -LICENSE= ART10 GPLv1 -LICENSE_COMB= dual +LICENSE= ART10 GPLv1 +LICENSE_COMB= dual BUILD_DEPENDS= p5-HTTP-Date>=6:${PORTSDIR}/www/p5-HTTP-Date \ p5-HTTP-Message>=6:${PORTSDIR}/www/p5-HTTP-Message \ Index: www/p5-RTx-Calendar/Makefile =================================================================== --- www/p5-RTx-Calendar/Makefile +++ www/p5-RTx-Calendar/Makefile @@ -10,8 +10,8 @@ MAINTAINER= matthew@FreeBSD.org COMMENT= Calendar extension module for the RT ticketing system -LICENSE_COMB= dual -LICENSE= ART10 GPLv1 +LICENSE_COMB= dual +LICENSE= ART10 GPLv1 BUILD_DEPENDS= p5-Date-ICal>0:${PORTSDIR}/devel/p5-Date-ICal \ p5-Data-ICal>0:${PORTSDIR}/deskutils/p5-Data-ICal \ Index: www/py-django-photologue/Makefile =================================================================== --- www/py-django-photologue/Makefile +++ www/py-django-photologue/Makefile @@ -21,7 +21,7 @@ USE_PYDISTUTILS= yes PYDISTUTILS_AUTOPLIST= yes -OPTIONSFILE= ${PORT_DBDIR}/py-${PORTNAME}/options +OPTIONSFILE= ${PORT_DBDIR}/py-${PORTNAME}/options OPTIONS_DEFINE= TAGGING OPTIONS_DEFAULT= TAGGING Index: www/py-fcgi/Makefile =================================================================== --- www/py-fcgi/Makefile +++ www/py-fcgi/Makefile @@ -6,7 +6,7 @@ CATEGORIES= www python MASTER_SITES= http://alldunn.com/python/ \ ftp://ftp.holywar.net/pub/FreeBSD/ -PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} +PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} DISTNAME= ${PORTNAME} EXTRACT_SUFX= .py EXTRACT_ONLY= # Index: www/red5/Makefile =================================================================== --- www/red5/Makefile +++ www/red5/Makefile @@ -12,7 +12,7 @@ USE_JAVA= yes NO_BUILD= yes USE_RC_SUBR= red5 -WRKSRC= ${WRKDIR}/red5-server-1.0 +WRKSRC= ${WRKDIR}/red5-server-1.0 RED5_USER?= ${WWWOWN} RED5_GRP?= ${WWWGRP} Index: www/rubygem-url-mount/Makefile =================================================================== --- www/rubygem-url-mount/Makefile +++ www/rubygem-url-mount/Makefile @@ -1,13 +1,13 @@ # Created by: Rodrigo Nicola Lombardo # $FreeBSD$ -PORTNAME= url_mount +PORTNAME= url_mount PORTVERSION= 0.2.1 CATEGORIES= www rubygems MASTER_SITES= RG MAINTAINER= rodnic@gmail.com -COMMENT= Glue to allow mounted rack applications to know where they're mounted +COMMENT= Glue to allow mounted rack applications to know where they're mounted RUN_DEPENDS= rubygem-rack>=0:${PORTSDIR}/www/rubygem-rack Index: www/trac-tags/Makefile =================================================================== --- www/trac-tags/Makefile +++ www/trac-tags/Makefile @@ -26,15 +26,15 @@ .if !defined(SVN_REV) .if defined(BOOTSTRAP) -LANG= "C" -SVN_REV!= svn info http://trac-hacks.org/svn/tagsplugin/trunk/ | ${GREP} Revision | cut -d' ' -f2 +LANG= "C" +SVN_REV!= svn info http://trac-hacks.org/svn/tagsplugin/trunk/ | ${GREP} Revision | cut -d' ' -f2 .else .include "Makefile.svn_rev" .endif .endif .if defined(BOOTSTRAP) || defined(SVN_FETCH) -FETCH_DEPENDS+= svn:${PORTSDIR}/devel/subversion +FETCH_DEPENDS+= svn:${PORTSDIR}/devel/subversion do-fetch: ${MKDIR} ${WRKDIR} Index: www/w3mir/Makefile =================================================================== --- www/w3mir/Makefile +++ www/w3mir/Makefile @@ -10,13 +10,13 @@ MAINTAINER= ports@FreeBSD.org COMMENT= All-purpose HTTP copying and mirroring tool -LICENSE= ART10 +LICENSE= ART10 BUILD_DEPENDS= p5-libwww>=0:${PORTSDIR}/www/p5-libwww RUN_DEPENDS:= ${BUILD_DEPENDS} USES= perl5 -USE_PERL5= configure +USE_PERL5= configure INSTALL_TARGET= pure_install Index: www/xpi-ghostery/Makefile =================================================================== --- www/xpi-ghostery/Makefile +++ www/xpi-ghostery/Makefile @@ -3,7 +3,7 @@ PORTNAME= ghostery PORTVERSION= 5.0.6 -DISTVERSIONSUFFIX= -an+fx +DISTVERSIONSUFFIX= -an+fx CATEGORIES= www MAINTAINER= clutton@zoho.com Index: x11-drivers/xf86-video-rdc/Makefile =================================================================== --- x11-drivers/xf86-video-rdc/Makefile +++ x11-drivers/xf86-video-rdc/Makefile @@ -17,7 +17,7 @@ .include .if defined(WITH_NEW_XORG) -IGNORE= does not build with X server 1.12 +IGNORE= does not build with X server 1.12 .endif NO_STAGE= yes Index: x11-fonts/profont/Makefile =================================================================== --- x11-fonts/profont/Makefile +++ x11-fonts/profont/Makefile @@ -8,7 +8,7 @@ DISTNAME= ${PORTNAME}-x11 MAINTAINER= manuel.giraud@gmail.com -COMMENT= Profont - The ultimate programming font. +COMMENT= Profont - The ultimate programming font. BUILD_DEPENDS= mkfontdir:${PORTSDIR}/x11-fonts/mkfontdir \ fc-cache:${PORTSDIR}/x11-fonts/fontconfig Index: x11-toolkits/gnomemm/Makefile =================================================================== --- x11-toolkits/gnomemm/Makefile +++ x11-toolkits/gnomemm/Makefile @@ -5,9 +5,9 @@ PORTVERSION= 2.6.2 PORTREVISION= 8 CATEGORIES= x11-toolkits devel gnome -MASTER_SITES= # empty -DISTFILES= # empty -EXTRACT_ONLY= # empty +MASTER_SITES= # empty +DISTFILES= # empty +EXTRACT_ONLY= # empty MAINTAINER= bland@FreeBSD.org COMMENT= The "meta-port" for the powerful C++ bindings to the GNOME2 libraries Index: x11-wm/lxsession/Makefile =================================================================== --- x11-wm/lxsession/Makefile +++ x11-wm/lxsession/Makefile @@ -29,7 +29,7 @@ NLS_USES= gettext # Wrong versioning upstream -PORTSCOUT= skipv:0.4.9.2 +PORTSCOUT= skipv:0.4.9.2 .include