Index: sys/gnu/dts/mips/MZK-W04N-XX.dts
===================================================================
--- /dev/null
+++ sys/gnu/dts/mips/MZK-W04N-XX.dts
@@ -1,94 +0,0 @@
-/dts-v1/;
-
-#include "rt2880.dtsi"
-
-/ {
-	compatible = "MZK-WNH", "ralink,rt2880-soc";
-	model = "Planex MZK-WNH";
-
-/*
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-*/
-
-	cfi@1f000000 {
-		compatible = "cfi-flash";
-		reg = <0x1f000000 0x800000>;
-		bank-width = <2>;
-		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Bootloader";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		devdata: partition@30000 {
-			label = "Config";
-			reg = <0x00030000 0x00010000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "Factory";
-			reg = <0x00040000 0x00010000>;
-			read-only;
-		};
-		kernel: partition@50000 {
-			label = "kernel";
-			reg = <0x00050000 0x000f0000>;
-			read-only;
-		};
-		rootfs: partition@160000 {
-			label = "rootfs";
-			reg = <0x00140000 0x002c0000>;
-			read-only;
-		};
-		upgrade: partition@400000 {
-			label = "upgrade";
-			reg = <0x00050000 0x003b0000>;
-			read-only;
-		};
-
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "status";
-			gpios = <&gpio0 12 0>;
-		};
-
-	};
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <0x198>;
-		};
-
-	};
-
-	ip17x@0 {
-		compatible = "icplus,ip17x";
-	};
-
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};