Index: head/ObsoleteFiles.inc =================================================================== --- head/ObsoleteFiles.inc +++ head/ObsoleteFiles.inc @@ -38,6 +38,8 @@ # xargs -n1 | sort | uniq -d; # done +# 20181021: mse(4) removal +OLD_FILES+=usr/share/man/man4/mse.4.gz # 20181021: joy(4) removal OLD_FILES+=usr/share/man/man4/joy.4.gz OLD_FILES+=usr/include/sys/joystick.h Index: head/share/man/man4/man4.i386/Makefile =================================================================== --- head/share/man/man4/man4.i386/Makefile +++ head/share/man/man4/man4.i386/Makefile @@ -16,7 +16,6 @@ glxiic.4 \ glxsb.4 \ longrun.4 \ - mse.4 \ npx.4 \ pae.4 \ pbio.4 \ Index: head/share/man/man4/man4.i386/mse.4 =================================================================== --- head/share/man/man4/man4.i386/mse.4 +++ head/share/man/man4/man4.i386/mse.4 @@ -1,379 +0,0 @@ -.\" Copyright 1992 by the University of Guelph -.\" -.\" Permission to use, copy and modify this -.\" software and its documentation for any purpose and without -.\" fee is hereby granted, provided that the above copyright -.\" notice appear in all copies and that both that copyright -.\" notice and this permission notice appear in supporting -.\" documentation. -.\" University of Guelph makes no representations about the suitability of -.\" this software for any purpose. It is provided "as is" -.\" without express or implied warranty. -.\" -.\" $FreeBSD$ -.\" -.Dd December 3, 1997 -.Dt MSE 4 i386 -.Os -.Sh NAME -.Nm mse -.Nd bus and InPort mice driver -.Sh SYNOPSIS -.\" .Cd "options MSE_XXX=N" -.Cd "device mse" -.Pp -In -.Pa /boot/device.hints : -.Cd hint.mse.0.at="isa" -.Cd hint.mse.0.port="0x23c" -.Cd hint.mse.0.irq="5" -.Sh DESCRIPTION -The -.Nm -driver provides support for the bus mouse and the InPort mouse, which -are often collectively called ``bus'' mice, as these mice are sold with -an interface card which needs to be installed in an expansion bus slot. -The interface circuit may come on an integrated I/O card or as an option -on video cards. -.Pp -The bus and InPort mice have two or three buttons, -and a D-sub 9-pin male connector or a round DIN 9-pin -male connector. -.Pp -The primary port address of the bus and InPort mouse interface cards -is usually 0x23c. -Some cards may also be set to use the secondary port -address at 0x238. -The interface cards require a single IRQ, which may be -2, 3, 4 or 5. -Some cards may offer additional IRQs. -The port number and the IRQ number are configured by jumpers on the cards -or by software provided with the card. -.Pp -Frequency, or report rate, at which the device sends movement -and button state reports to the host system, may also be configurable on -some interface cards. -It may be 15, 30, 60 or 120Hz. -.Pp -The difference between the two types of the mice is not in mouse devices -(in fact they are exactly the same). -But in the circuit on the interface -cards. -This means that the device from a bus mouse package can be -connected to the interface card from an InPort mouse package, or vice -versa, provided that their connectors match. -.Ss Operation Levels -The -.Nm -driver has two levels of operation. -The current operation level can be set via an ioctl call. -.Pp -At the level zero the basic support is provided; the device driver will report -horizontal and vertical movement of the attached device -and state of up to three buttons in the format described below. -It is a subset of the MouseSystems protocol. -.Pp -.Bl -tag -width Byte_1 -compact -.It Byte 1 -.Bl -tag -width bit_7 -compact -.It bit 7 -Always one. -.It bit 6..3 -Always zero. -.It bit 2 -Left button status; cleared if pressed, otherwise set. -.It bit 1 -Middle button status; cleared if pressed, otherwise set. -Always one, -if the device does not have the middle button. -.It bit 0 -Right button status; cleared if pressed, otherwise set. -.El -.It Byte 2 -Horizontal movement count in two's compliment; -128 through 127. -.It Byte 3 -Vertical movement count in two's compliment; -128 through 127. -.It Byte 4 -Always zero. -.It Byte 5 -Always zero. -.El -.Pp -This is the default level of operation and the driver is initially -at this level when opened by the user program. -.Pp -At the operation level one (extended level), a data packet is encoded -in the standard format -.Dv MOUSE_PROTO_SYSMOUSE -as defined in -.Xr mouse 4 . -.Ss Acceleration -The -.Nm -driver can somewhat `accelerate' the movement of the pointing device. -The faster you move the device, the further the pointer -travels on the screen. -The driver has an internal variable which governs the effect of -the acceleration. -Its value can be modified via the driver flag -or via an ioctl call. -.Ss Device Number -The minor device number of the -.Nm -is made up of: -.Bd -literal -offset indent -minor = (`unit' << 1) | `non-blocking' -.Ed -.Pp -where `unit' is the device number (usually 0) and the `non-blocking' bit -is set to indicate ``do not block waiting for mouse input, -return immediately''. -The `non-blocking' bit should be set for \fIXFree86\fP, -therefore the minor device number usually used for \fIXFree86\fP is 1. -See -.Sx FILES -for device node names. -.Sh DRIVER CONFIGURATION -.\" .Ss Kernel Configuration Options -.Ss Driver Flags -The -.Nm -driver accepts the following driver flag. -Set it in the -kernel configuration file -(see -.Xr config 8 ) -or in the User Configuration Menu at -the boot time -(see -.Xr boot 8 ) . -.Bl -tag -width MOUSE -.It bit 4..7 ACCELERATION -This flag controls the amount of acceleration effect. -The smaller the value of this flag is, more sensitive the movement becomes. -The minimum value allowed, thus the value for the most sensitive setting, -is one. -Setting this flag to zero will completely disables the -acceleration effect. -.El -.Sh IOCTLS -There are a few -.Xr ioctl 2 -commands for mouse drivers. -These commands and related structures and constants are defined in -.In sys/mouse.h . -General description of the commands is given in -.Xr mouse 4 . -This section explains the features specific to the -.Nm -driver. -.Pp -.Bl -tag -width MOUSE -compact -.It Dv MOUSE_GETLEVEL Ar int *level -.It Dv MOUSE_SETLEVEL Ar int *level -These commands manipulate the operation level of the -.Nm -driver. -.Pp -.It Dv MOUSE_GETHWINFO Ar mousehw_t *hw -Returns the hardware information of the attached device in the following -structure. -Only the -.Dv iftype -field is guaranteed to be filled with the correct value by the current -version of the -.Nm -driver. -.Bd -literal -typedef struct mousehw { - int buttons; /* number of buttons */ - int iftype; /* I/F type */ - int type; /* mouse/track ball/pad... */ - int model; /* I/F dependent model ID */ - int hwid; /* I/F dependent hardware ID */ -} mousehw_t; -.Ed -.Pp -The -.Dv buttons -field holds the number of buttons on the device. -.Pp -The -.Dv iftype -is either -.Dv MOUSE_IF_BUS -or -.Dv MOUSE_IF_INPORT . -.Pp -The -.Dv type -may be -.Dv MOUSE_MOUSE , -.Dv MOUSE_TRACKBALL , -.Dv MOUSE_STICK , -.Dv MOUSE_PAD , -or -.Dv MOUSE_UNKNOWN . -.Pp -The -.Dv model -is always -.Dv MOUSE_MODEL_GENERIC -at the operation level 0. -It may be -.Dv MOUSE_MODEL_GENERIC -or one of -.Dv MOUSE_MODEL_XXX -constants at higher operation levels. -.Pp -The -.Dv hwid -is always 0. -.Pp -.It Dv MOUSE_GETMODE Ar mousemode_t *mode -The command gets the current operation parameters of the mouse -driver. -.Bd -literal -typedef struct mousemode { - int protocol; /* MOUSE_PROTO_XXX */ - int rate; /* report rate (per sec), -1 if unknown */ - int resolution; /* MOUSE_RES_XXX, -1 if unknown */ - int accelfactor; /* acceleration factor */ - int level; /* driver operation level */ - int packetsize; /* the length of the data packet */ - unsigned char syncmask[2]; /* sync. bits */ -} mousemode_t; -.Ed -.Pp -The -.Dv protocol -is either -.Dv MOUSE_PROTO_BUS -or -.Dv MOUSE_PROTO_INPORT -at the operation level zero. -.Dv MOUSE_PROTO_SYSMOUSE -at the operation level one. -.Pp -The -.Dv rate -is the status report rate (reports/sec) at which the device will send -movement report to the host computer. -As there is no standard to detect the current setting, -this field is always set to -1. -.Pp -The -.Dv resolution -is always set to -1. -.Pp -The -.Dv accelfactor -field holds a value to control acceleration feature -(see -.Sx Acceleration ) . -It is zero or greater. -If it is zero, acceleration is disabled. -.Pp -The -.Dv packetsize -field specifies the length of the data packet. -It depends on the -operation level. -.Pp -.Bl -tag -width level_0__ -compact -.It Em level 0 -5 bytes -.It Em level 1 -8 bytes -.El -.Pp -The array -.Dv syncmask -holds a bit mask and pattern to detect the first byte of the -data packet. -.Dv syncmask[0] -is the bit mask to be ANDed with a byte. -If the result is equal to -.Dv syncmask[1] , -the byte is likely to be the first byte of the data packet. -Note that this detection method is not 100% reliable, -thus, should be taken only as an advisory measure. -.Pp -Only -.Dv level -and -.Dv accelfactor -are modifiable by the -.Dv MOUSE_SETMODE -command. -Changing the other field does not cause error, but has no effect. -.Pp -.It Dv MOUSE_SETMODE Ar mousemode_t *mode -The command changes the current operation parameters of the mouse driver -as specified in -.Ar mode . -Only -.Dv level -and -.Dv accelfactor -may be modifiable. -Setting values in the other field does not generate -error and has no effect. -.Pp -.It Dv MOUSE_READDATA Ar mousedata_t *data -.It Dv MOUSE_READSTATE Ar mousedata_t *state -These commands are not supported by the -.Nm -driver. -.Pp -.It Dv MOUSE_GETSTATUS Ar mousestatus_t *status -The command returns the current state of buttons and -movement counts as described in -.Xr mouse 4 . -.El -.Sh FILES -.Bl -tag -width /dev/nmse0 -compact -.It Pa /dev/mse0 -`non-blocking' device node in the system without -.Em devfs , -`blocking' under -.Em devfs . -.It Pa /dev/nmse0 -`non-blocking' device node under -.Em devfs . -.El -.Sh EXAMPLES -.Dl "device mse" -.Pp -In -.Pa /boot/device.hints : -.Dl hint.mse.0.at="isa" -.Dl hint.mse.0.port="0x23c" -.Dl hint.mse.0.irq="5" -.Pp -Add the -.Nm -driver at the primary port address with the IRQ 5. -.Pp -.Dl "device mse" -.Pp -.Dl hint.mse.1.at="isa" -.Dl hint.mse.1.port="0x238" -.Dl hint.mse.1.irq="4" -.Dl hint.mse.1.flags="0x30" -.Pp -Define the -.Nm -driver at the secondary port address with the IRQ 4 and the acceleration -factor of 3. -.Sh SEE ALSO -.Xr ioctl 2 , -.Xr mouse 4 , -.Xr psm 4 , -.Xr sysmouse 4 , -.Xr moused 8 -.\".Sh HISTORY -.Sh CAVEATS -Some bus mouse interface cards generate interrupts at the fixed report rate -when enabled, whether or not the mouse state is changing. -The others generate interrupts only when the state is changing. Index: head/share/man/man4/mouse.4 =================================================================== --- head/share/man/man4/mouse.4 +++ head/share/man/man4/mouse.4 @@ -36,7 +36,6 @@ .In sys/mouse.h .Sh DESCRIPTION The mouse drivers -.Xr mse 4 , .Xr psm 4 , .Xr ums 4 and @@ -360,8 +359,6 @@ .Bl -tag -width /dev/sysmouseXX -compact .It Pa /dev/cuau%d serial ports -.It Pa /dev/mse%d -bus and InPort mouse device .It Pa /dev/psm%d PS/2 mouse device .It Pa /dev/sysmouse @@ -371,7 +368,6 @@ .El .Sh SEE ALSO .Xr ioctl 2 , -.Xr mse 4 , .Xr psm 4 , .Xr sysmouse 4 , .Xr ums 4 , Index: head/share/man/man4/psm.4 =================================================================== --- head/share/man/man4/psm.4 +++ head/share/man/man4/psm.4 @@ -806,7 +806,6 @@ .Xr syslog 3 , .Xr atkbdc 4 , .Xr mouse 4 , -.Xr mse 4 , .Xr sysmouse 4 , .Xr moused 8 , .Xr syslogd 8 Index: head/share/man/man5/rc.conf.5 =================================================================== --- head/share/man/man5/rc.conf.5 +++ head/share/man/man5/rc.conf.5 @@ -3256,11 +3256,9 @@ this is the actual port the mouse is on. It might be .Pa /dev/cuau0 -for a COM1 serial mouse, +for a COM1 serial mouse, or .Pa /dev/psm0 -for a PS/2 mouse or -.Pa /dev/mse0 -for a bus mouse, for example. +for a PS/2 mouse, for example. .It Va moused_flags .Pq Vt str If Index: head/sys/conf/files.i386 =================================================================== --- head/sys/conf/files.i386 +++ head/sys/conf/files.i386 @@ -278,8 +278,6 @@ dev/ipmi/ipmi_pci.c optional ipmi pci dev/ipmi/ipmi_linux.c optional ipmi compat_linux dev/le/if_le_isa.c optional le isa -dev/mse/mse.c optional mse -dev/mse/mse_isa.c optional mse isa dev/nctgpio/nctgpio.c optional nctgpio dev/nfe/if_nfe.c optional nfe pci dev/ntb/if_ntb/if_ntb.c optional if_ntb Index: head/sys/dev/mse/mse.c =================================================================== --- head/sys/dev/mse/mse.c +++ head/sys/dev/mse/mse.c @@ -1,566 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 M. Warner Losh - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/* - * Copyright 1992 by the University of Guelph - * - * Permission to use, copy and modify this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting - * documentation. - * University of Guelph makes no representations about the suitability of - * this software for any purpose. It is provided "as is" - * without express or implied warranty. - */ -/* - * Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and - * the X386 port, courtesy of - * Rick Macklem, rick@snowhite.cis.uoguelph.ca - * Caveats: The driver currently uses spltty(), but doesn't use any - * generic tty code. It could use splmse() (that only masks off the - * bus mouse interrupt, but that would require hacking in i386/isa/icu.s. - * (This may be worth the effort, since the Logitech generates 30/60 - * interrupts/sec continuously while it is open.) - * NB: The ATI has NOT been tested yet! - */ - -/* - * Modification history: - * Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com) - * improved probe based on input from Logitech. - * - * Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu) - * fixes to make it work with Microsoft InPort busmouse - * - * Jan, 1993 -- E. Stark (stark@cs.sunysb.edu) - * added patches for new "select" interface - * - * May 4, 1993 -- E. Stark (stark@cs.sunysb.edu) - * changed position of some spl()'s in mseread - * - * October 8, 1993 -- E. Stark (stark@cs.sunysb.edu) - * limit maximum negative x/y value to -127 to work around XFree problem - * that causes spurious button pushes. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -devclass_t mse_devclass; - -static d_open_t mseopen; -static d_close_t mseclose; -static d_read_t mseread; -static d_ioctl_t mseioctl; -static d_poll_t msepoll; - -static struct cdevsw mse_cdevsw = { - .d_version = D_VERSION, - .d_open = mseopen, - .d_close = mseclose, - .d_read = mseread, - .d_ioctl = mseioctl, - .d_poll = msepoll, - .d_name = "mse", -}; - -static void mseintr(void *); -static void mseintr_locked(mse_softc_t *sc); -static void msetimeout(void *); - -#define MSE_NBLOCKIO(dev) (dev2unit(dev) != 0) - -#define MSEPRI (PZERO + 3) - -int -mse_common_attach(device_t dev) -{ - mse_softc_t *sc; - int unit, flags, rid; - - sc = device_get_softc(dev); - unit = device_get_unit(dev); - mtx_init(&sc->sc_lock, "mse", NULL, MTX_DEF); - callout_init_mtx(&sc->sc_callout, &sc->sc_lock, 0); - - rid = 0; - sc->sc_intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - RF_ACTIVE); - if (sc->sc_intr == NULL) { - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - mtx_destroy(&sc->sc_lock); - return ENXIO; - } - - if (bus_setup_intr(dev, sc->sc_intr, INTR_TYPE_TTY | INTR_MPSAFE, - NULL, mseintr, sc, &sc->sc_ih)) { - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr); - mtx_destroy(&sc->sc_lock); - return ENXIO; - } - flags = device_get_flags(dev); - sc->mode.accelfactor = (flags & MSE_CONFIG_ACCEL) >> 4; - - sc->sc_dev = make_dev(&mse_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600, - "mse%d", unit); - sc->sc_dev->si_drv1 = sc; - sc->sc_ndev = make_dev(&mse_cdevsw, 1, UID_ROOT, GID_WHEEL, 0600, - "nmse%d", unit); - sc->sc_ndev->si_drv1 = sc; - gone_in_dev(dev, 12, "mse(4) driver"); - - return 0; -} - -int -mse_detach(device_t dev) -{ - mse_softc_t *sc; - int rid; - - sc = device_get_softc(dev); - MSE_LOCK(sc); - if (sc->sc_flags & MSESC_OPEN) { - MSE_UNLOCK(sc); - return EBUSY; - } - - /* Sabotage subsequent opens. */ - sc->sc_mousetype = MSE_NONE; - MSE_UNLOCK(sc); - - destroy_dev(sc->sc_dev); - destroy_dev(sc->sc_ndev); - - rid = 0; - bus_teardown_intr(dev, sc->sc_intr, sc->sc_ih); - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr); - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - - callout_drain(&sc->sc_callout); - mtx_destroy(&sc->sc_lock); - - return 0; -} - -/* - * Exclusive open the mouse, initialize it and enable interrupts. - */ -static int -mseopen(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - - MSE_LOCK(sc); - if (sc->sc_mousetype == MSE_NONE) { - MSE_UNLOCK(sc); - return (ENXIO); - } - if (sc->sc_flags & MSESC_OPEN) { - MSE_UNLOCK(sc); - return (EBUSY); - } - sc->sc_flags |= MSESC_OPEN; - sc->sc_obuttons = sc->sc_buttons = MOUSE_MSC_BUTTONS; - sc->sc_deltax = sc->sc_deltay = 0; - sc->sc_bytesread = sc->mode.packetsize = MOUSE_MSC_PACKETSIZE; - sc->sc_watchdog = FALSE; - callout_reset(&sc->sc_callout, hz * 2, msetimeout, dev); - sc->mode.level = 0; - sc->status.flags = 0; - sc->status.button = sc->status.obutton = 0; - sc->status.dx = sc->status.dy = sc->status.dz = 0; - - /* - * Initialize mouse interface and enable interrupts. - */ - (*sc->sc_enablemouse)(sc->sc_port); - MSE_UNLOCK(sc); - return (0); -} - -/* - * mseclose: just turn off mouse innterrupts. - */ -static int -mseclose(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - - MSE_LOCK(sc); - callout_stop(&sc->sc_callout); - (*sc->sc_disablemouse)(sc->sc_port); - sc->sc_flags &= ~MSESC_OPEN; - MSE_UNLOCK(sc); - return(0); -} - -/* - * mseread: return mouse info using the MSC serial protocol, but without - * using bytes 4 and 5. - * (Yes this is cheesy, but it makes the X386 server happy, so...) - */ -static int -mseread(struct cdev *dev, struct uio *uio, int ioflag) -{ - mse_softc_t *sc = dev->si_drv1; - int xfer, error; - - /* - * If there are no protocol bytes to be read, set up a new protocol - * packet. - */ - MSE_LOCK(sc); - while (sc->sc_flags & MSESC_READING) { - if (MSE_NBLOCKIO(dev)) { - MSE_UNLOCK(sc); - return (0); - } - sc->sc_flags |= MSESC_WANT; - error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH, "mseread", - 0); - if (error) { - MSE_UNLOCK(sc); - return (error); - } - } - sc->sc_flags |= MSESC_READING; - xfer = 0; - if (sc->sc_bytesread >= sc->mode.packetsize) { - while (sc->sc_deltax == 0 && sc->sc_deltay == 0 && - (sc->sc_obuttons ^ sc->sc_buttons) == 0) { - if (MSE_NBLOCKIO(dev)) - goto out; - sc->sc_flags |= MSESC_WANT; - error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH, - "mseread", 0); - if (error) - goto out; - } - - /* - * Generate protocol bytes. - * For some reason X386 expects 5 bytes but never uses - * the fourth or fifth? - */ - sc->sc_bytes[0] = sc->mode.syncmask[1] - | (sc->sc_buttons & ~sc->mode.syncmask[0]); - if (sc->sc_deltax > 127) - sc->sc_deltax = 127; - if (sc->sc_deltax < -127) - sc->sc_deltax = -127; - sc->sc_deltay = -sc->sc_deltay; /* Otherwise mousey goes wrong way */ - if (sc->sc_deltay > 127) - sc->sc_deltay = 127; - if (sc->sc_deltay < -127) - sc->sc_deltay = -127; - sc->sc_bytes[1] = sc->sc_deltax; - sc->sc_bytes[2] = sc->sc_deltay; - sc->sc_bytes[3] = sc->sc_bytes[4] = 0; - sc->sc_bytes[5] = sc->sc_bytes[6] = 0; - sc->sc_bytes[7] = MOUSE_SYS_EXTBUTTONS; - sc->sc_obuttons = sc->sc_buttons; - sc->sc_deltax = sc->sc_deltay = 0; - sc->sc_bytesread = 0; - } - xfer = min(uio->uio_resid, sc->mode.packetsize - sc->sc_bytesread); - MSE_UNLOCK(sc); - error = uiomove(&sc->sc_bytes[sc->sc_bytesread], xfer, uio); - MSE_LOCK(sc); -out: - sc->sc_flags &= ~MSESC_READING; - if (error == 0) - sc->sc_bytesread += xfer; - if (sc->sc_flags & MSESC_WANT) { - sc->sc_flags &= ~MSESC_WANT; - MSE_UNLOCK(sc); - wakeup(sc); - } else - MSE_UNLOCK(sc); - return (error); -} - -/* - * mseioctl: process ioctl commands. - */ -static int -mseioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - mousestatus_t status; - int err = 0; - - switch (cmd) { - - case MOUSE_GETHWINFO: - MSE_LOCK(sc); - *(mousehw_t *)addr = sc->hw; - if (sc->mode.level == 0) - ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC; - MSE_UNLOCK(sc); - break; - - case MOUSE_GETMODE: - MSE_LOCK(sc); - *(mousemode_t *)addr = sc->mode; - switch (sc->mode.level) { - case 0: - break; - case 1: - ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; - ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK; - ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC; - break; - } - MSE_UNLOCK(sc); - break; - - case MOUSE_SETMODE: - switch (((mousemode_t *)addr)->level) { - case 0: - case 1: - break; - default: - return (EINVAL); - } - MSE_LOCK(sc); - if (((mousemode_t *)addr)->accelfactor < -1) { - MSE_UNLOCK(sc); - return (EINVAL); - } else if (((mousemode_t *)addr)->accelfactor >= 0) - sc->mode.accelfactor = - ((mousemode_t *)addr)->accelfactor; - sc->mode.level = ((mousemode_t *)addr)->level; - switch (sc->mode.level) { - case 0: - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_MSC_PACKETSIZE; - break; - case 1: - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_SYS_PACKETSIZE; - break; - } - MSE_UNLOCK(sc); - break; - - case MOUSE_GETLEVEL: - MSE_LOCK(sc); - *(int *)addr = sc->mode.level; - MSE_UNLOCK(sc); - break; - - case MOUSE_SETLEVEL: - switch (*(int *)addr) { - case 0: - MSE_LOCK(sc); - sc->mode.level = *(int *)addr; - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_MSC_PACKETSIZE; - MSE_UNLOCK(sc); - break; - case 1: - MSE_LOCK(sc); - sc->mode.level = *(int *)addr; - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_SYS_PACKETSIZE; - MSE_UNLOCK(sc); - break; - default: - return (EINVAL); - } - break; - - case MOUSE_GETSTATUS: - MSE_LOCK(sc); - status = sc->status; - sc->status.flags = 0; - sc->status.obutton = sc->status.button; - sc->status.button = 0; - sc->status.dx = 0; - sc->status.dy = 0; - sc->status.dz = 0; - MSE_UNLOCK(sc); - *(mousestatus_t *)addr = status; - break; - - case MOUSE_READSTATE: - case MOUSE_READDATA: - return (ENODEV); - - default: - return (ENOTTY); - } - return (err); -} - -/* - * msepoll: check for mouse input to be processed. - */ -static int -msepoll(struct cdev *dev, int events, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - int revents = 0; - - MSE_LOCK(sc); - if (events & (POLLIN | POLLRDNORM)) { - if (sc->sc_bytesread != sc->mode.packetsize || - sc->sc_deltax != 0 || sc->sc_deltay != 0 || - (sc->sc_obuttons ^ sc->sc_buttons) != 0) - revents |= events & (POLLIN | POLLRDNORM); - else - selrecord(td, &sc->sc_selp); - } - MSE_UNLOCK(sc); - return (revents); -} - -/* - * msetimeout: watchdog timer routine. - */ -static void -msetimeout(void *arg) -{ - struct cdev *dev; - mse_softc_t *sc; - - dev = (struct cdev *)arg; - sc = dev->si_drv1; - MSE_ASSERT_LOCKED(sc); - if (sc->sc_watchdog) { - if (bootverbose) - printf("%s: lost interrupt?\n", devtoname(dev)); - mseintr_locked(sc); - } - sc->sc_watchdog = TRUE; - callout_schedule(&sc->sc_callout, hz); -} - -/* - * mseintr: update mouse status. sc_deltax and sc_deltay are accumulative. - */ -static void -mseintr(void *arg) -{ - mse_softc_t *sc = arg; - - MSE_LOCK(sc); - mseintr_locked(sc); - MSE_UNLOCK(sc); -} - -static void -mseintr_locked(mse_softc_t *sc) -{ - /* - * the table to turn MouseSystem button bits (MOUSE_MSC_BUTTON?UP) - * into `mousestatus' button bits (MOUSE_BUTTON?DOWN). - */ - static int butmap[8] = { - 0, - MOUSE_BUTTON3DOWN, - MOUSE_BUTTON2DOWN, - MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN - }; - int dx, dy, but; - int sign; - -#ifdef DEBUG - static int mse_intrcnt = 0; - if((mse_intrcnt++ % 10000) == 0) - printf("mseintr\n"); -#endif /* DEBUG */ - if ((sc->sc_flags & MSESC_OPEN) == 0) - return; - - (*sc->sc_getmouse)(sc->sc_port, &dx, &dy, &but); - if (sc->mode.accelfactor > 0) { - sign = (dx < 0); - dx = dx * dx / sc->mode.accelfactor; - if (dx == 0) - dx = 1; - if (sign) - dx = -dx; - sign = (dy < 0); - dy = dy * dy / sc->mode.accelfactor; - if (dy == 0) - dy = 1; - if (sign) - dy = -dy; - } - sc->sc_deltax += dx; - sc->sc_deltay += dy; - sc->sc_buttons = but; - - but = butmap[~but & MOUSE_MSC_BUTTONS]; - sc->status.dx += dx; - sc->status.dy += dy; - sc->status.flags |= ((dx || dy) ? MOUSE_POSCHANGED : 0) - | (sc->status.button ^ but); - sc->status.button = but; - - sc->sc_watchdog = FALSE; - - /* - * If mouse state has changed, wake up anyone wanting to know. - */ - if (sc->sc_deltax != 0 || sc->sc_deltay != 0 || - (sc->sc_obuttons ^ sc->sc_buttons) != 0) { - if (sc->sc_flags & MSESC_WANT) { - sc->sc_flags &= ~MSESC_WANT; - wakeup(sc); - } - selwakeuppri(&sc->sc_selp, MSEPRI); - } -} Index: head/sys/dev/mse/mse_isa.c =================================================================== --- head/sys/dev/mse/mse_isa.c +++ head/sys/dev/mse/mse_isa.c @@ -1,393 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 M. Warner Losh - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/*- - * Copyright 1992 by the University of Guelph - * - * Permission to use, copy and modify this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting - * documentation. - * University of Guelph makes no representations about the suitability of - * this software for any purpose. It is provided "as is" - * without express or implied warranty. - */ -/* - * Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and - * the X386 port, courtesy of - * Rick Macklem, rick@snowhite.cis.uoguelph.ca - * Caveats: The driver currently uses spltty(), but doesn't use any - * generic tty code. It could use splmse() (that only masks off the - * bus mouse interrupt, but that would require hacking in i386/isa/icu.s. - * (This may be worth the effort, since the Logitech generates 30/60 - * interrupts/sec continuously while it is open.) - * NB: The ATI has NOT been tested yet! - */ - -/* - * Modification history: - * Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com) - * improved probe based on input from Logitech. - * - * Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu) - * fixes to make it work with Microsoft InPort busmouse - * - * Jan, 1993 -- E. Stark (stark@cs.sunysb.edu) - * added patches for new "select" interface - * - * May 4, 1993 -- E. Stark (stark@cs.sunysb.edu) - * changed position of some spl()'s in mseread - * - * October 8, 1993 -- E. Stark (stark@cs.sunysb.edu) - * limit maximum negative x/y value to -127 to work around XFree problem - * that causes spurious button pushes. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -static int mse_isa_probe(device_t dev); -static int mse_isa_attach(device_t dev); - -static device_method_t mse_methods[] = { - DEVMETHOD(device_probe, mse_isa_probe), - DEVMETHOD(device_attach, mse_isa_attach), - DEVMETHOD(device_detach, mse_detach), - { 0, 0 } -}; - -static driver_t mse_driver = { - "mse", - mse_methods, - sizeof(mse_softc_t), -}; - -static struct isa_pnp_id mse_ids[] = { - { 0x000fd041, "Bus mouse" }, /* PNP0F00 */ - { 0x020fd041, "InPort mouse" }, /* PNP0F02 */ - { 0x0d0fd041, "InPort mouse compatible" }, /* PNP0F0D */ - { 0x110fd041, "Bus mouse compatible" }, /* PNP0F11 */ - { 0x150fd041, "Logitech bus mouse" }, /* PNP0F15 */ - { 0x180fd041, "Logitech bus mouse compatible" },/* PNP0F18 */ - { 0 } -}; - -/* - * Logitech bus mouse definitions - */ -#define MSE_SETUP 0x91 /* What does this mean? */ - /* The definition for the control port */ - /* is as follows: */ - - /* D7 = Mode set flag (1 = active) */ - /* D6,D5 = Mode selection (port A) */ - /* 00 = Mode 0 = Basic I/O */ - /* 01 = Mode 1 = Strobed I/O */ - /* 10 = Mode 2 = Bi-dir bus */ - /* D4 = Port A direction (1 = input)*/ - /* D3 = Port C (upper 4 bits) */ - /* direction. (1 = input) */ - /* D2 = Mode selection (port B & C) */ - /* 0 = Mode 0 = Basic I/O */ - /* 1 = Mode 1 = Strobed I/O */ - /* D1 = Port B direction (1 = input)*/ - /* D0 = Port C (lower 4 bits) */ - /* direction. (1 = input) */ - - /* So 91 means Basic I/O on all 3 ports,*/ - /* Port A is an input port, B is an */ - /* output port, C is split with upper */ - /* 4 bits being an output port and lower*/ - /* 4 bits an input port, and enable the */ - /* sucker. */ - /* Courtesy Intel 8255 databook. Lars */ -#define MSE_HOLD 0x80 -#define MSE_RXLOW 0x00 -#define MSE_RXHIGH 0x20 -#define MSE_RYLOW 0x40 -#define MSE_RYHIGH 0x60 -#define MSE_DISINTR 0x10 -#define MSE_INTREN 0x00 - -static int mse_probelogi(device_t dev, mse_softc_t *sc); -static void mse_disablelogi(struct resource *port); -static void mse_getlogi(struct resource *port, int *dx, int *dy, - int *but); -static void mse_enablelogi(struct resource *port); - -/* - * ATI Inport mouse definitions - */ -#define MSE_INPORT_RESET 0x80 -#define MSE_INPORT_STATUS 0x00 -#define MSE_INPORT_DX 0x01 -#define MSE_INPORT_DY 0x02 -#define MSE_INPORT_MODE 0x07 -#define MSE_INPORT_HOLD 0x20 -#define MSE_INPORT_INTREN 0x09 - -static int mse_probeati(device_t dev, mse_softc_t *sc); -static void mse_enableati(struct resource *port); -static void mse_disableati(struct resource *port); -static void mse_getati(struct resource *port, int *dx, int *dy, - int *but); - -static struct mse_types mse_types[] = { - { MSE_ATIINPORT, - mse_probeati, mse_enableati, mse_disableati, mse_getati, - { 2, MOUSE_IF_INPORT, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, }, - { MOUSE_PROTO_INPORT, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE, - { MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, }, - { MSE_LOGITECH, - mse_probelogi, mse_enablelogi, mse_disablelogi, mse_getlogi, - { 2, MOUSE_IF_BUS, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, }, - { MOUSE_PROTO_BUS, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE, - { MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, }, - { 0, }, -}; - -static int -mse_isa_probe(device_t dev) -{ - mse_softc_t *sc; - int error; - int rid; - int i; - - /* check PnP IDs */ - error = ISA_PNP_PROBE(device_get_parent(dev), dev, mse_ids); - if (error == ENXIO) - return error; - - sc = device_get_softc(dev); - rid = 0; - sc->sc_port = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &rid, - MSE_IOSIZE, RF_ACTIVE); - if (sc->sc_port == NULL) - return ENXIO; - - /* - * Check for each mouse type in the table. - */ - i = 0; - while (mse_types[i].m_type) { - if ((*mse_types[i].m_probe)(dev, sc)) { - sc->sc_mousetype = mse_types[i].m_type; - sc->sc_enablemouse = mse_types[i].m_enable; - sc->sc_disablemouse = mse_types[i].m_disable; - sc->sc_getmouse = mse_types[i].m_get; - sc->hw = mse_types[i].m_hw; - sc->mode = mse_types[i].m_mode; - bus_release_resource(dev, SYS_RES_IOPORT, rid, - sc->sc_port); - device_set_desc(dev, "Bus/InPort Mouse"); - return 0; - } - i++; - } - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - return ENXIO; -} - -static int -mse_isa_attach(device_t dev) -{ - mse_softc_t *sc; - int rid; - - sc = device_get_softc(dev); - - rid = 0; - sc->sc_port = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &rid, - MSE_IOSIZE, RF_ACTIVE); - if (sc->sc_port == NULL) - return ENXIO; - - return (mse_common_attach(dev)); -} - -/* - * Routines for the Logitech mouse. - */ -/* - * Test for a Logitech bus mouse and return 1 if it is. - * (until I know how to use the signature port properly, just disable - * interrupts and return 1) - */ -static int -mse_probelogi(device_t dev, mse_softc_t *sc) -{ - - int sig; - - bus_write_1(sc->sc_port, MSE_PORTD, MSE_SETUP); - /* set the signature port */ - bus_write_1(sc->sc_port, MSE_PORTB, MSE_LOGI_SIG); - - DELAY(30000); /* 30 ms delay */ - sig = bus_read_1(sc->sc_port, MSE_PORTB) & 0xFF; - if (sig == MSE_LOGI_SIG) { - bus_write_1(sc->sc_port, MSE_PORTC, MSE_DISINTR); - return(1); - } else { - if (bootverbose) - device_printf(dev, "wrong signature %x\n", sig); - return(0); - } -} - -/* - * Initialize Logitech mouse and enable interrupts. - */ -static void -mse_enablelogi(struct resource *port) -{ - int dx, dy, but; - - bus_write_1(port, MSE_PORTD, MSE_SETUP); - mse_getlogi(port, &dx, &dy, &but); -} - -/* - * Disable interrupts for Logitech mouse. - */ -static void -mse_disablelogi(struct resource *port) -{ - - bus_write_1(port, MSE_PORTC, MSE_DISINTR); -} - -/* - * Get the current dx, dy and button up/down state. - */ -static void -mse_getlogi(struct resource *port, int *dx, int *dy, int *but) -{ - char x, y; - - bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RXLOW); - x = bus_read_1(port, MSE_PORTA); - *but = (x >> 5) & MOUSE_MSC_BUTTONS; - x &= 0xf; - bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RXHIGH); - x |= (bus_read_1(port, MSE_PORTA) << 4); - bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RYLOW); - y = (bus_read_1(port, MSE_PORTA) & 0xf); - bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RYHIGH); - y |= (bus_read_1(port, MSE_PORTA) << 4); - *dx = x; - *dy = y; - bus_write_1(port, MSE_PORTC, MSE_INTREN); -} - -/* - * Routines for the ATI Inport bus mouse. - */ -/* - * Test for an ATI Inport bus mouse and return 1 if it is. - * (do not enable interrupts) - */ -static int -mse_probeati(device_t dev, mse_softc_t *sc) -{ - int i; - - for (i = 0; i < 2; i++) - if (bus_read_1(sc->sc_port, MSE_PORTC) == 0xde) - return (1); - return (0); -} - -/* - * Initialize ATI Inport mouse and enable interrupts. - */ -static void -mse_enableati(struct resource *port) -{ - - bus_write_1(port, MSE_PORTA, MSE_INPORT_RESET); - bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE); - bus_write_1(port, MSE_PORTB, MSE_INPORT_INTREN); -} - -/* - * Disable interrupts for ATI Inport mouse. - */ -static void -mse_disableati(struct resource *port) -{ - - bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE); - bus_write_1(port, MSE_PORTB, 0); -} - -/* - * Get current dx, dy and up/down button state. - */ -static void -mse_getati(struct resource *port, int *dx, int *dy, int *but) -{ - char byte; - - bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE); - bus_write_1(port, MSE_PORTB, MSE_INPORT_HOLD); - bus_write_1(port, MSE_PORTA, MSE_INPORT_STATUS); - *but = ~bus_read_1(port, MSE_PORTB) & MOUSE_MSC_BUTTONS; - bus_write_1(port, MSE_PORTA, MSE_INPORT_DX); - byte = bus_read_1(port, MSE_PORTB); - *dx = byte; - bus_write_1(port, MSE_PORTA, MSE_INPORT_DY); - byte = bus_read_1(port, MSE_PORTB); - *dy = byte; - bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE); - bus_write_1(port, MSE_PORTB, MSE_INPORT_INTREN); -} - -DRIVER_MODULE(mse, isa, mse_driver, mse_devclass, 0, 0); -ISA_PNP_INFO(mse_ids); Index: head/sys/dev/mse/msevar.h =================================================================== --- head/sys/dev/mse/msevar.h +++ head/sys/dev/mse/msevar.h @@ -1,126 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 M. Warner Losh - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/*- - * Copyright 1992 by the University of Guelph - * - * Permission to use, copy and modify this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting - * documentation. - * University of Guelph makes no representations about the suitability of - * this software for any purpose. It is provided "as is" - * without express or implied warranty. - */ - -/* driver configuration flags (config) */ -#define MSE_CONFIG_ACCEL 0x00f0 /* acceleration factor */ -#define MSE_CONFIG_FLAGS (MSE_CONFIG_ACCEL) - -/* - * Software control structure for mouse. The sc_enablemouse(), - * sc_disablemouse() and sc_getmouse() routines must be called locked. - */ -typedef struct mse_softc { - int sc_flags; - int sc_mousetype; - struct selinfo sc_selp; - struct resource *sc_port; - struct resource *sc_intr; - void *sc_ih; - void (*sc_enablemouse)(struct resource *port); - void (*sc_disablemouse)(struct resource *port); - void (*sc_getmouse)(struct resource *port, int *dx, int *dy, - int *but); - int sc_deltax; - int sc_deltay; - int sc_obuttons; - int sc_buttons; - int sc_bytesread; - u_char sc_bytes[MOUSE_SYS_PACKETSIZE]; - struct callout sc_callout; - struct mtx sc_lock; - int sc_watchdog; - struct cdev *sc_dev; - struct cdev *sc_ndev; - mousehw_t hw; - mousemode_t mode; - mousestatus_t status; -} mse_softc_t; - -#define MSE_LOCK(sc) mtx_lock(&(sc)->sc_lock) -#define MSE_UNLOCK(sc) mtx_unlock(&(sc)->sc_lock) -#define MSE_ASSERT_LOCKED(sc) mtx_assert(&(sc)->sc_lock, MA_OWNED) - -/* Flags */ -#define MSESC_OPEN 0x1 -#define MSESC_WANT 0x2 -#define MSESC_READING 0x4 - -/* and Mouse Types */ -#define MSE_NONE 0 /* don't move this! */ - -/* isa bus mouse types */ -#define MSE_LOGITECH 0x1 -#define MSE_ATIINPORT 0x2 - -#define MSE_LOGI_SIG 0xA5 - -/* XXX msereg.h? */ -#define MSE_PORTA 0 -#define MSE_PORTB 1 -#define MSE_PORTC 2 -#define MSE_PORTD 3 -#define MSE_IOSIZE 4 - -/* - * Table of mouse types. - * Keep the Logitech last, since I haven't figured out how to probe it - * properly yet. (Someday I'll have the documentation.) - */ -struct mse_types { - int m_type; /* Type of bus mouse */ - int (*m_probe)(device_t dev, mse_softc_t *sc); - /* Probe routine to test for it */ - void (*m_enable)(struct resource *port); - /* Start routine */ - void (*m_disable)(struct resource *port); - /* Disable interrupts routine */ - void (*m_get)(struct resource *port, int *dx, int *dy, int *but); - /* and get mouse status */ - mousehw_t m_hw; /* buttons iftype type model hwid */ - mousemode_t m_mode; /* proto rate res accel level size mask */ -}; - -extern devclass_t mse_devclass; -int mse_common_attach(device_t); -int mse_detach(device_t); Index: head/sys/i386/conf/NOTES =================================================================== --- head/sys/i386/conf/NOTES +++ head/sys/i386/conf/NOTES @@ -501,14 +501,6 @@ options DRM_DEBUG # Include debug printfs (slow) # -# mse: Logitech and ATI InPort bus mouse ports - -device mse -hint.mse.0.at="isa" -hint.mse.0.port="0x23c" -hint.mse.0.irq="5" - -# # Network interfaces: # Index: head/sys/modules/Makefile =================================================================== --- head/sys/modules/Makefile +++ head/sys/modules/Makefile @@ -260,7 +260,6 @@ mrsas \ msdosfs \ msdosfs_iconv \ - ${_mse} \ msk \ ${_mthca} \ mvs \ @@ -761,7 +760,6 @@ _glxiic= glxiic _glxsb= glxsb #_ibcs2= ibcs2 -_mse= mse _ncr= ncr _ncv= ncv _nsp= nsp Index: head/sys/modules/mse/Makefile =================================================================== --- head/sys/modules/mse/Makefile +++ head/sys/modules/mse/Makefile @@ -1,8 +0,0 @@ -# $FreeBSD$ - -.PATH: ${SRCTOP}/sys/dev/mse - -KMOD= mse -SRCS= mse.c mse_isa.c device_if.h bus_if.h isa_if.h - -.include Index: head/sys/sys/mouse.h =================================================================== --- head/sys/sys/mouse.h +++ head/sys/sys/mouse.h @@ -141,8 +141,8 @@ /* iftype */ #define MOUSE_IF_UNKNOWN (-1) #define MOUSE_IF_SERIAL 0 -#define MOUSE_IF_BUS 1 -#define MOUSE_IF_INPORT 2 +/* 1 was bus */ +/* 2 was inport */ #define MOUSE_IF_PS2 3 #define MOUSE_IF_SYSMOUSE 4 #define MOUSE_IF_USB 5 @@ -200,8 +200,8 @@ #define MOUSE_PROTO_LOGI 2 /* Logitech, 3 bytes */ #define MOUSE_PROTO_MM 3 /* MM series, 3 bytes */ #define MOUSE_PROTO_LOGIMOUSEMAN 4 /* Logitech MouseMan 3/4 bytes */ -#define MOUSE_PROTO_BUS 5 /* MS/Logitech bus mouse */ -#define MOUSE_PROTO_INPORT 6 /* MS/ATI InPort mouse */ +/* 5 was bus mouse */ +/* 6 was inport mosue */ #define MOUSE_PROTO_PS2 7 /* PS/2 mouse, 3 bytes */ #define MOUSE_PROTO_HITTAB 8 /* Hitachi Tablet 3 bytes */ #define MOUSE_PROTO_GLIDEPOINT 9 /* ALPS GlidePoint, 3/4 bytes */ Index: head/tools/kerneldoc/subsys/Doxyfile-dev_mse =================================================================== --- head/tools/kerneldoc/subsys/Doxyfile-dev_mse +++ head/tools/kerneldoc/subsys/Doxyfile-dev_mse @@ -1,21 +0,0 @@ -# Doxyfile 1.5.2 - -# $FreeBSD$ - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- -PROJECT_NAME = "FreeBSD kernel MSE device code" -OUTPUT_DIRECTORY = $(DOXYGEN_DEST_PATH)/dev_mse/ -EXTRACT_ALL = YES # for undocumented src, no warnings enabled -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- -INPUT = $(DOXYGEN_SRC_PATH)/dev/mse/ \ - $(NOTREVIEWED) - -GENERATE_TAGFILE = dev_mse/dev_mse.tag - -@INCLUDE_PATH = $(DOXYGEN_INCLUDE_PATH) -@INCLUDE = common-Doxyfile - Index: head/usr.sbin/bsdconfig/mouse/include/messages.subr =================================================================== --- head/usr.sbin/bsdconfig/mouse/include/messages.subr +++ head/usr.sbin/bsdconfig/mouse/include/messages.subr @@ -27,8 +27,6 @@ hline_press_enter_or_space="Press enter or space" msg_auto="Auto" msg_auto_desc="Bus mouse, PS/2 style mouse or PnP serial mouse" -msg_busmouse="BusMouse" -msg_busmouse_desc="Logitech, ATI or MS bus mouse (/dev/mse0)" msg_cancel="Cancel" msg_com1="COM1" msg_com1_desc="Serial mouse on COM1 (/dev/cuau0)" Index: head/usr.sbin/bsdconfig/mouse/port =================================================================== --- head/usr.sbin/bsdconfig/mouse/port +++ head/usr.sbin/bsdconfig/mouse/port @@ -56,7 +56,6 @@ '3 $msg_com2' '$msg_com2_desc' '4 $msg_com3' '$msg_com3_desc' '5 $msg_com4' '$msg_com4_desc' - '6 $msg_busmouse' '$msg_busmouse_desc' " # END-QUOTE local defaultitem= # Calculated below local hline= @@ -75,7 +74,6 @@ /dev/cuau1) defaultitem="3 $msg_com2" ;; /dev/cuau2) defaultitem="4 $msg_com3" ;; /dev/cuau3) defaultitem="5 $msg_com4" ;; - /dev/mse0) defaultitem="6 $msg_busmouse" ;; esac local menu_choice @@ -136,8 +134,6 @@ moused_port_to_set="/dev/cuau2" ;; "5 $msg_com4") # Serial mouse on COM4 (/dev/cuau3) moused_port_to_set="/dev/cuau3" ;; -"6 $msg_busmouse") # Logitech, ATI or MS bus mouse (/dev/mse0) - moused_port_to_set="/dev/mse0" ;; esac if [ "$moused_port_to_set" ]; then Index: head/usr.sbin/moused/moused.8 =================================================================== --- head/usr.sbin/moused/moused.8 +++ head/usr.sbin/moused/moused.8 @@ -297,7 +297,6 @@ .It Ar port Port (device file) name, i.e.\& .Pa /dev/cuau0 , -.Pa /dev/mse0 and .Pa /dev/psm0 . .It Ar if @@ -555,10 +554,7 @@ The USB mouse has a flat rectangular connector. .Pp The next thing to decide is a port to use for the given interface. -For the bus, InPort and PS/2 mice, there is little choice: -the bus and InPort mice always use -.Pa /dev/mse0 , -and the PS/2 mouse is always at +The PS/2 mouse is always at .Pa /dev/psm0 . There may be more than one serial port to which the serial mouse can be attached. @@ -713,8 +709,6 @@ .Bl -tag -width /dev/consolectl -compact .It Pa /dev/consolectl device to control the console -.It Pa /dev/mse%d -bus and InPort mouse driver .It Pa /dev/psm%d PS/2 mouse driver .It Pa /dev/sysmouse @@ -792,7 +786,6 @@ .Xr vidcontrol 1 , .Xr xset 1 , .Xr keyboard 4 , -.Xr mse 4 , .Xr psm 4 , .Xr screen 4 , .Xr sysmouse 4 , Index: head/usr.sbin/moused/moused.c =================================================================== --- head/usr.sbin/moused/moused.c +++ head/usr.sbin/moused/moused.c @@ -198,8 +198,6 @@ /* interface (the table must be ordered by MOUSE_IF_XXX in mouse.h) */ static symtab_t rifs[] = { { "serial", MOUSE_IF_SERIAL, 0 }, - { "bus", MOUSE_IF_BUS, 0 }, - { "inport", MOUSE_IF_INPORT, 0 }, { "ps/2", MOUSE_IF_PS2, 0 }, { "sysmouse", MOUSE_IF_SYSMOUSE, 0 }, { "usb", MOUSE_IF_USB, 0 }, @@ -213,8 +211,8 @@ "logitech", "mmseries", "mouseman", - "busmouse", - "inportmouse", + "wasbusmouse", + "wasinportmouse", "ps/2", "mmhitab", "glidepoint", @@ -290,12 +288,8 @@ /* Mitsumi Wireless Scroll Mouse */ { "MTM6401", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, - /* MS bus */ - { "PNP0F00", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, /* MS serial */ { "PNP0F01", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, - /* MS InPort */ - { "PNP0F02", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC }, /* MS PS/2 */ { "PNP0F03", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, /* @@ -322,8 +316,6 @@ { "PNP0F0B", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, /* MS serial comatible */ { "PNP0F0C", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, - /* MS InPort comatible */ - { "PNP0F0D", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC }, /* MS PS/2 comatible */ { "PNP0F0E", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, /* MS BallPoint comatible */ @@ -332,8 +324,6 @@ /* TI QuickPort */ { "PNP0F10", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC }, #endif - /* MS bus comatible */ - { "PNP0F11", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, /* Logitech PS/2 */ { "PNP0F12", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, /* PS/2 */ @@ -342,16 +332,12 @@ /* MS Kids Mouse */ { "PNP0F14", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC }, #endif - /* Logitech bus */ - { "PNP0F15", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, #if notyet /* Logitech SWIFT */ { "PNP0F16", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC }, #endif /* Logitech serial compat */ { "PNP0F17", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC }, - /* Logitech bus compatible */ - { "PNP0F18", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, /* Logitech PS/2 compatible */ { "PNP0F19", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, #if notyet @@ -860,15 +846,6 @@ /* the default port name */ switch(rodent.rtype) { - case MOUSE_PROTO_INPORT: - /* INPORT and BUS are the same... */ - rodent.rtype = MOUSE_PROTO_BUS; - /* FALLTHROUGH */ - case MOUSE_PROTO_BUS: - if (!rodent.portname) - rodent.portname = "/dev/mse0"; - break; - case MOUSE_PROTO_PS2: if (!rodent.portname) rodent.portname = "/dev/psm0"; @@ -1519,9 +1496,6 @@ logwarnx("unknown mouse protocol (%d)", rodent.mode.protocol); return (MOUSE_PROTO_UNKNOWN); } else { - /* INPORT and BUS are the same... */ - if (rodent.mode.protocol == MOUSE_PROTO_INPORT) - rodent.mode.protocol = MOUSE_PROTO_BUS; if (rodent.mode.protocol != rodent.rtype) { /* Hmm, the driver doesn't agree with the user... */ if (rodent.rtype != MOUSE_PROTO_UNKNOWN) @@ -1559,8 +1533,6 @@ } else { rodent.mode.protocol = MOUSE_PROTO_UNKNOWN; } - if (rodent.mode.protocol == MOUSE_PROTO_INPORT) - rodent.mode.protocol = MOUSE_PROTO_BUS; /* make final adjustment */ if (rodent.mode.protocol != MOUSE_PROTO_UNKNOWN) { @@ -1771,8 +1743,6 @@ setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); /* FALLTHROUGH */ - case MOUSE_PROTO_BUS: - case MOUSE_PROTO_INPORT: case MOUSE_PROTO_PS2: if (rodent.rate >= 0) rodent.mode.rate = rodent.rate; @@ -2160,13 +2130,6 @@ } prev_x = x; prev_y = y; - break; - - case MOUSE_PROTO_BUS: /* Bus */ - case MOUSE_PROTO_INPORT: /* InPort */ - act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS]; - act->dx = (signed char)pBuf[1]; - act->dy = - (signed char)pBuf[2]; break; case MOUSE_PROTO_PS2: /* PS/2 */