Index: etc/Makefile =================================================================== --- etc/Makefile +++ etc/Makefile @@ -15,7 +15,6 @@ BIN1= crontab \ dhclient.conf \ disktab \ - gettytab \ group \ hosts \ hosts.allow \ Index: etc/gettytab =================================================================== --- etc/gettytab +++ etc/gettytab @@ -1,239 +0,0 @@ -# $FreeBSD$ -# from: @(#)gettytab 5.14 (Berkeley) 3/27/91 -# -# Most of the table entries here are just copies of the old getty table, -# it is by no means certain, or even likely, that any of them are optimal -# for any purpose whatever. Nor is it likely that more than a couple are -# even correct. -# -# The default gettytab entry, used to set defaults for all other -# entries, and in cases where getty is called with no table name. -# -# cb, ce and ck are desirable on most crt's. The non-crt entries need to -# be changed to turn them off (:cb@:ce@:ck@:). -# -# lc should always be on; it's a remainder of some stone age when there -# have been terminals around not being able of handling lower-case -# characters. Those terminals aren't supported any longer, but getty is -# `smart' about them by default. -# -# Parity defaults to even, but the Pc entry and all the `std' entries -# specify no parity. The different parities are: -# (none): same as ep for getty. login will use terminal as is. -# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and -# fake parity. login will use even parity (cs7 parenb -parodd). -# op: same as ep except odd parity (cs7 parenb parodd) for login. -# getty will fake odd parity as well. -# ap: same as ep except -inpck instead of inpck for login. -# ap overrides op and ep. -# np: 1. don't fake parity in getty. The fake parity garbles -# characters on non-terminals (like pccons) that don't -# support parity. It would probably better for getty not to -# try to fake parity. It could just use cbreak mode so as -# not to force cs8 and let the hardware handle the parity. -# login has to be rely on the hardware anyway. -# 2. set cs8 -parenb -istrip -inpck. -# ep:op: same as ap. -# -default:\ - :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\ - :if=/etc/issue: - -# -# Fixed speed entries -# -# The "std.NNN" names are known to the special case -# portselector code in getty, however they can -# be assigned to any table desired. -# The "NNN-baud" names are known to the special case -# autobaud code in getty, and likewise can -# be assigned to any table desired (hopefully the same speed). -# -std:\ - :np:sp#0: -a|std.110|110-baud:\ - :np:nd#1:cd#1:uc:sp#110: -b|std.134|134.5-baud:\ - :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl: -1|std.150|150-baud:\ - :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 : -c|std.300|300-baud:\ - :np:nd#1:cd#1:sp#300: -d|std.600|600-baud:\ - :np:nd#1:cd#1:sp#600: -f|std.1200|1200-baud:\ - :np:fd#1:sp#1200: -6|std.2400|2400-baud:\ - :np:sp#2400: -7|std.4800|4800-baud:\ - :np:sp#4800: -2|std.9600|9600-baud:\ - :np:sp#9600: -g|std.19200|19200-baud:\ - :np:sp#19200: -std.38400|38400-baud:\ - :np:sp#38400: -std.57600|57600-baud:\ - :np:sp#57600: -std.115200|115200-baud:\ - :np:sp#115200: -std.230400|230400-baud:\ - :np:sp#230400: - -# -# Entry specifying explicit device settings. See termios(4) and -# /usr/include/termios.h, too. The entry forces the tty into -# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control. -# -# cflags: CLOCAL | HUPCL | CREAD | CS8 -# oflags: OPOST | ONLCR | OXTABS -# iflags: IXOFF | IXON | ICRNL | IGNPAR -# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE -# -# The `0' flags don't have input enabled. The `1' flags don't echo. -# (Echoing is done inside getty itself.) -# -local.9600|CLOCAL tty @ 9600 Bd:\ - :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\ - :o0#0x00000007:o1#0x00000002:o2#0x00000007:\ - :i0#0x00000704:i1#0x00000000:i2#0x00000704:\ - :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\ - :sp#9600:np: - -# -# Dial in rotary tables, speed selection via 'break' -# -0|d300|Dial-300:\ - :nx=d1200:cd#2:sp#300: -d1200|Dial-1200:\ - :nx=d150:fd#1:sp#1200: -d150|Dial-150:\ - :nx=d110:lm@:tc=150-baud: -d110|Dial-110:\ - :nx=d300:tc=300-baud: - -# -# Fast dialup terminals, 2400/1200/300 rotary (can start either way) -# -D2400|d2400|Fast-Dial-2400:\ - :nx=D1200:tc=2400-baud: -3|D1200|Fast-Dial-1200:\ - :nx=D300:tc=1200-baud: -5|D300|Fast-Dial-300:\ - :nx=D2400:tc=300-baud: - -# -#telebit (19200) -# -t19200:\ - :nx=t2400:tc=19200-baud: -t2400:\ - :nx=t1200:tc=2400-baud: -t1200:\ - :nx=t19200:tc=1200-baud: - -# -#telebit (9600) -# -t9600:\ - :nx=t2400a:tc=9600-baud: -t2400a:\ - :nx=t1200a:tc=2400-baud: -t1200a:\ - :nx=t9600:tc=1200-baud: - -# -# Odd special case terminals -# --|tty33|asr33|Pity the poor user of this beast:\ - :tc=110-baud: - -4|Console|Console Decwriter II:\ - :nd@:cd@:rw:tc=300-baud: - -e|Console-1200|Console Decwriter III:\ - :fd@:nd@:cd@:rw:tc=1200-baud: - -i|Interdata console:\ - :uc:sp#0: - -l|lsi chess terminal:\ - :sp#300: - -X|Xwindow|X window system:\ - :fd@:nd@:cd@:rw:sp#9600: - -P|Pc|Pc console:\ - :ht:np:sp#9600: - -# -# Weirdo special case for fast crt's with hardcopy devices -# -8|T9600|CRT with hardcopy:\ - :nx=T300:tc=9600-baud: -9|T300|CRT with hardcopy (300):\ - :nx=T9600:tc=300-baud: - -# -# Plugboard, and misc other terminals -# -plug-9600|Plugboard-9600:\ - :pf#1:tc=9600-baud: -p|P9600|Plugboard-9600-rotary:\ - :pf#1:nx=P300:tc=9600-baud: -q|P300|Plugboard-300:\ - :pf#1:nx=P1200:tc=300-baud: -r|P1200|Plugboard-1200:\ - :pf#1:nx=P9600:tc=1200-baud: - -# -# XXXX Port selector -# -s|DSW|Port Selector:\ - :ps:sp#2400: - -# -# Auto-baud speed detect entry for Micom 600. -# Special code in getty will switch this out -# to one of the NNN-baud entries. -# -A|Auto-baud:\ - :ab:sp#2400:f0#040: - -# -# autologin - automatically log in as root -# - -autologin|al.9600:\ - :al=root:tc=std.9600: -al.19200:\ - :al=root:tc=std.19200: -al.38400:\ - :al=root:tc=std.38400: -al.57600:\ - :al=root:tc=std.57600: -al.115200:\ - :al=root:tc=std.115200: -al.230400:\ - :al=root:tc=std.230400: -al.Pc:\ - :al=root:tc=Pc - -# -# Entries for 3-wire serial terminals. These don't supply carrier, so -# clocal needs to be set, and crtscts needs to be unset. -# -3wire:\ - :np:nc:sp#0: -3wire.9600|9600-3wire:\ - :np:nc:sp#9600: -3wire.19200|19200-3wire:\ - :np:nc:sp#19200: -3wire.38400|38400-3wire:\ - :np:nc:sp#38400: -3wire.57600|57600-3wire:\ - :np:nc:sp#57600: -3wire.115200|115200-3wire:\ - :np:nc:sp#115200: -3wire.230400|230400-3wire:\ - :np:nc:sp#230400: Index: libexec/getty/Makefile =================================================================== --- libexec/getty/Makefile +++ libexec/getty/Makefile @@ -1,6 +1,7 @@ # from: @(#)Makefile 8.1 (Berkeley) 6/4/93 # $FreeBSD$ +CONFS= gettytab PROG= getty SRCS= main.c init.c subr.c chat.c LIBADD= util