Index: etc/auto_master =================================================================== --- etc/auto_master +++ etc/auto_master @@ -3,3 +3,6 @@ # Automounter master map, see auto_master(5) for details. # /net -hosts -nobrowse,nosuid +# When using the -media special map, make sure to uncomment +# the call to "automount -c" in devd.conf. +#/media -media -nosuid Index: etc/autofs/Makefile =================================================================== --- etc/autofs/Makefile +++ etc/autofs/Makefile @@ -1,6 +1,6 @@ # $FreeBSD$ -FILES= include_ldap special_hosts special_null +FILES= include_ldap special_hosts special_media special_null NO_OBJ= FILESDIR= /etc/autofs Index: etc/autofs/special_media =================================================================== --- /dev/null +++ etc/autofs/special_media @@ -0,0 +1,118 @@ +#!/bin/sh +# +# $FreeBSD$ +# + +# Obtain a list of (geom-provider-name, access-count) pairs, turning this +# +# z0xfffff80005085d00 [shape=hexagon,label="ada0\nr2w2e3\nerr#0\nsector=512\nstripe=0"]; +# +# Into this: +# +# ada0 r2w2e3 +# +# It would be easier to use kern.geom.conftxt instead, but it lacks +# access counts. +pairs=$(sysctl kern.geom.confdot | grep hexagon | sed 's/.*label="\([^\]*\)\\n\([^\]*\).*/\1 \2/') + +# Obtain a list of GEOM providers that are not already open - not mounted, +# and without other GEOM class, such as gpart, attached. In other words, +# grep for "r0w0e0". +providers=$(echo "$pairs" | awk '$2 == "r0w0e0" { print $1 }') + +fstype_for_geom() { + local _fstype _geom _type + + _fstype="" + _geom="$1" + + # XXX: Instead of file(1) we should have an utility to determine + # filesystem type. It should also provide a way to obtain + # filesystem label, to replace the glabel hack. + _type="`file -bs /dev/${_geom}`" + case "${_type}" in + (*FAT*) # must be before NTFS section because: newfs_msdos -O NTFS -L NTFS + _fstype="msdosfs" + ;; + (*ext2*) + _fstype="ext2fs" + ;; + (*ext3*) + _fstype="ext2fs" + ;; + (*Unix\ Fast\ File*) + _fstype="ufs" + ;; + (*ISO\ 9660*) + _fstype="cd9660" + ;; + esac + + echo "${_fstype}" +} + +label_for_geom() { + local _geom _label + + _label="" + _geom="$1" + + # We cannot use "glabel status $geom", because it returns + # first label, which might be of uninteresting kind, eg. gptid. + _label="`glabel status -s | awk '/gptid|ufsid/ { next }; { if($3 == "'"${_geom}"'") print $1 }'`" + + # Return label, stripping the "whatever/" prefix (eg. "ufs/"). + echo "${_label}" | sed 's!^.*/!!' +} + +geom_for_label() { + local _label + + _label="$1" + + glabel status -s | awk '/gptid|ufsid/ { next }; { if($1 ~ /'"${_label}"'/) print $3 }' +} + +if [ $# -eq 0 ]; then + # Called without any arguments; print newline-separated list + # of devices available for mounting. + for p in $providers; do + # Ignore providers containing slashes; we're not interested + # in geom_label creations. + case $p in + (*/*) + continue; + ;; + esac + + fstype="`fstype_for_geom $p`" + if [ -z "$fstype" ]; then + # Ignore devices for which we were unable + # to determine filesystem type. + continue + fi + + label="`label_for_geom $p`" + if [ -n "$label" ]; then + p="$label" + fi + + echo "$p" + done + + exit 0 +fi; + +key="$1" +p="`geom_for_label $key`" +if [ -n "$p" ]; then + key="$p" +fi + +fstype="`fstype_for_geom $key`" +if [ -z "$fstype" ]; then + # Unrecognized filesystem; don't return anything. + exit 0 +fi + +echo "-fstype=$fstype,nosuid :/dev/$key" Index: etc/defaults/rc.conf.orig =================================================================== --- /dev/null +++ etc/defaults/rc.conf.orig @@ -0,0 +1,702 @@ +#!/bin/sh + +# This is rc.conf - a file full of useful variables that you can set +# to change the default startup behavior of your system. You should +# not edit this file! Put any overrides into one of the ${rc_conf_files} +# instead and you will be able to update these defaults later without +# spamming your local configuration information. +# +# The ${rc_conf_files} files should only contain values which override +# values set in this file. This eases the upgrade path when defaults +# are changed and new features are added. +# +# All arguments must be in double or single quotes. +# +# For a more detailed explanation of all the rc.conf variables, please +# refer to the rc.conf(5) manual page. +# +# $FreeBSD: head/etc/defaults/rc.conf 274841 2014-11-22 08:09:26Z hrs $ + +############################################################## +### Important initial Boot-time options #################### +############################################################## + +#rc_debug="NO" # Set to YES to enable debugging output from rc.d +rc_info="NO" # Enables display of informational messages at boot. +rc_startmsgs="YES" # Show "Starting foo:" messages at boot +rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown +early_late_divider="FILESYSTEMS" # Script that separates early/late + # stages of the boot process. Make sure you know + # the ramifications if you change this. + # See rc.conf(5) for more details. +always_force_depends="NO" # Set to check that indicated dependencies are + # running during boot (can increase boot time). + +apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). +apmd_enable="NO" # Run apmd to handle APM event from userland. +apmd_flags="" # Flags to apmd (if enabled). +ddb_enable="NO" # Set to YES to load ddb scripts at boot. +ddb_config="/etc/ddb.conf" # ddb(8) config file. +devd_enable="YES" # Run devd, to trigger programs on device tree changes. +devd_flags="" # Additional flags for devd(8). +#kld_list="" # Kernel modules to load after local disks are mounted +kldxref_enable="NO" # Build linker.hints files with kldxref(8). +kldxref_clobber="NO" # Overwrite old linker.hints at boot. +kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. +powerd_enable="NO" # Run powerd to lower our power usage. +powerd_flags="" # Flags to powerd (if enabled). +tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never +tmpsize="20m" # Size of mfs /tmp if created +tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp +varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never +varsize="32m" # Size of mfs /var if created +varmfs_flags="-S" # Extra mount options for the mfs /var +populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never +cleanvar_enable="YES" # Clean the /var directory +local_startup="/usr/local/etc/rc.d" # startup script dirs. +script_name_sep=" " # Change if your startup scripts' names contain spaces +rc_conf_files="/etc/rc.conf /etc/rc.conf.local" + +# ZFS support +zfs_enable="NO" # Set to YES to automatically mount ZFS file systems + +gptboot_enable="YES" # GPT boot success/failure reporting. + +# Experimental - test before enabling +gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab +gbde_devices="NO" # Devices to automatically attach (list, or AUTO) +gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices +gbde_lockdir="/etc" # Where to look for gbde lockfiles + +# GELI disk encryption configuration. +geli_devices="" # List of devices to automatically attach in addition to + # GELI devices listed in /etc/fstab. +geli_tries="" # Number of times to attempt attaching geli device. + # If empty, kern.geom.eli.tries will be used. +geli_default_flags="" # Default flags for geli(8). +geli_autodetach="YES" # Automatically detach on last close. + # Providers are marked as such when all file systems are + # mounted. +# Example use. +#geli_devices="da1 mirror/home" +#geli_da1_flags="-p -k /etc/geli/da1.keys" +#geli_da1_autodetach="NO" +#geli_mirror_home_flags="-k /etc/geli/home.keys" + +root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. +fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. +fsck_y_flags="" # Additional flags for fsck -y +background_fsck="YES" # Attempt to run fsck in the background where possible. +background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. +netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems. +extra_netfs_types="NO" # List of network extra filesystem types for delayed + # mount at startup (or NO). + +############################################################## +### Network configuration sub-section ###################### +############################################################## + +### Basic network and firewall/security options: ### +hostname="" # Set this! +hostid_enable="YES" # Set host UUID. +hostid_file="/etc/hostid" # File with hostuuid. +nisdomainname="NO" # Set to NIS domain if using NIS (or NO). +dhclient_program="/sbin/dhclient" # Path to dhcp client program. +dhclient_flags="" # Extra flags to pass to dhcp client. +#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only +background_dhclient="NO" # Start dhcp client in the background. +#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. +synchronous_dhclient="NO" # Start dhclient directly on configured + # interfaces during startup. +defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. +defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. +netif_enable="YES" # Set to YES to initialize network interfaces +netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. +wpa_supplicant_program="/usr/sbin/wpa_supplicant" +wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant +wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" +# +firewall_enable="NO" # Set to YES to enable firewall functionality +firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall +firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) +firewall_quiet="NO" # Set to YES to suppress rule display +firewall_logging="NO" # Set to YES to enable events logging +firewall_logif="NO" # Set to YES to create logging-pseudo interface +firewall_flags="" # Flags passed to ipfw when type is a file +firewall_coscripts="" # List of executables/scripts to run after + # firewall starts/stops +firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" + # firewall. +#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for + # "client" firewall. +firewall_simple_iif="ed1" # Inside network interface for "simple" + # firewall. +firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" + # firewall. +firewall_simple_oif="ed0" # Outside network interface for "simple" + # firewall. +firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" + # firewall. +#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" + # firewall. +#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix + # for "simple" firewall. +#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" + # firewall. +#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix + # for "simple" firewall. +firewall_myservices="" # List of TCP ports on which this host + # offers services for "workstation" firewall. +firewall_allowservices="" # List of IPs which have access to + # $firewall_myservices for "workstation" + # firewall. +firewall_trusted="" # List of IPs which have full access to this + # host for "workstation" firewall. +firewall_logdeny="NO" # Set to YES to log default denied incoming + # packets for "workstation" firewall. +firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports + # for which denied incoming packets are not + # logged for "workstation" firewall. +firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) +firewall_nat_interface="" # Public interface or IPaddress to use +firewall_nat_flags="" # Additional configuration parameters +dummynet_enable="NO" # Load the dummynet(4) module +ip_portrange_first="NO" # Set first dynamically allocated port +ip_portrange_last="NO" # Set last dynamically allocated port +ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) +ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon +ike_flags="" # Additional flags for IKE daemon +ipsec_enable="NO" # Set to YES to run setkey on ipsec_file +ipsec_file="/etc/ipsec.conf" # Name of config file for setkey +natd_program="/sbin/natd" # path to natd, if you want a different one. +natd_enable="NO" # Enable natd (if firewall_enable == YES). +natd_interface="" # Public interface or IPaddress to use. +natd_flags="" # Additional flags for natd. +ipfilter_enable="NO" # Set to YES to enable ipfilter functionality +ipfilter_program="/sbin/ipf" # where the ipfilter program lives +ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see + # /usr/src/contrib/ipfilter/rules for examples +ipfilter_flags="" # additional flags for ipfilter +ipnat_enable="NO" # Set to YES to enable ipnat functionality +ipnat_program="/sbin/ipnat" # where the ipnat program lives +ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat +ipnat_flags="" # additional flags for ipnat +ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat +ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives +ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" +ipfs_enable="NO" # Set to YES to enable saving and restoring + # of state tables at shutdown and boot +ipfs_program="/sbin/ipfs" # where the ipfs program lives +ipfs_flags="" # additional flags for ipfs +pf_enable="NO" # Set to YES to enable packet filter (pf) +pf_rules="/etc/pf.conf" # rules definition file for pf +pf_program="/sbin/pfctl" # where the pfctl program lives +pf_flags="" # additional flags for pfctl +pflog_enable="NO" # Set to YES to enable packet filter logging +pflog_logfile="/var/log/pflog" # where pflogd should store the logfile +pflog_program="/sbin/pflogd" # where the pflogd program lives +pflog_flags="" # additional flags for pflogd +ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf +ftpproxy_flags="" # additional flags for ftp-proxy(8) +pfsync_enable="NO" # Expose pf state to other hosts for syncing +pfsync_syncdev="" # Interface for pfsync to work through +pfsync_syncpeer="" # IP address of pfsync peer host +pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync +tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. +log_in_vain="0" # >=1 to log connects to ports w/o listeners. +tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). +tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN + # NOTE: this violates the TCP specification +icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets +icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets +network_interfaces="auto" # List of network interfaces (or "auto"). +cloned_interfaces="" # List of cloned network interfaces to create. +#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. +#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. +#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. +#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry +#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias +#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. +#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device +#create_args_vlan0="vlan 102" # vlan tag for vlan0 device +#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device +#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8) +#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. +# +#autobridge_interfaces="bridge0" # List of bridges to check +#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge +# +# If you have any sppp(4) interfaces above, you might also want to set +# the following parameters. Refer to spppcontrol(8) for their meaning. +sppp_interfaces="" # List of sppp interfaces. +#sppp_interfaces="...0" # example: sppp over ... +#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" + +# User ppp configuration. +ppp_enable="NO" # Start user-ppp (or NO). +ppp_program="/usr/sbin/ppp" # Path to user-ppp program. +ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". + # For details see man page for ppp(8). Default is auto. +ppp_nat="YES" # Use PPP's internal network address translation or NO. +ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. +ppp_user="root" # Which user to run ppp as + +# Start multiple instances of ppp at boot time +#ppp_profile="profile1 profile2 profile3" # Which profiles to use +#ppp_profile1_mode="ddial" # Override ppp mode for profile1 +#ppp_profile2_nat="NO" # Override nat mode for profile2 +# profile3 uses default ppp_mode and ppp_nat + +### Network daemon (miscellaneous) ### +hostapd_enable="NO" # Run hostap daemon. +syslogd_enable="YES" # Run syslog daemon (or NO). +syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. +syslogd_flags="-s" # Flags to syslogd (if enabled). +altlog_proglist="" # List of chrooted applicatioins in /var +inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). +inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. +inetd_flags="-wW -C 60" # Optional flags to inetd +iscsid_enable="NO" # iSCSI initiator daemon. +iscsictl_enable="NO" # iSCSI initiator autostart. +iscsictl_flags="-Aa" # Optional flags to iscsictl. +hastd_enable="NO" # Run the HAST daemon (YES/NO). +hastd_program="/sbin/hastd" # path to hastd, if you want a different one. +hastd_flags="" # Optional flags to hastd. +ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. +local_unbound_enable="NO" # local caching resolver + +# +# kerberos. Do not run the admin daemons on slave servers +# +kdc_enable="NO" # Run a kerberos 5 KDC (or NO). +kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC +kdc_flags="" # Additional flags to the kerberos 5 KDC +kadmind_enable="NO" # Run kadmind (or NO) +kadmind_program="/usr/libexec/kadmind" # path to kadmind +kpasswdd_enable="NO" # Run kpasswdd (or NO) +kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd +kfd_enable="NO" # Run kfd (or NO) +kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon +kfd_flags="" +ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon + # (master daemon). +ipropd_master_program="/usr/libexec/ipropd-master" +ipropd_master_flags="" # Flags to ipropd-master. +ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. +ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. +ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon + # (slave daemon). +ipropd_slave_program="/usr/libexec/ipropd-slave" +ipropd_slave_flags="" # Flags to ipropd-slave. +ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. +ipropd_slave_master="" # master node name. + +gssd_enable="NO" # Run the gssd daemon (or NO). +gssd_program="/usr/sbin/gssd" # Path to gssd. +gssd_flags="" # Flags for gssd. + +rwhod_enable="NO" # Run the rwho daemon (or NO). +rwhod_flags="" # Flags for rwhod +rarpd_enable="NO" # Run rarpd (or NO). +rarpd_flags="-a" # Flags to rarpd. +bootparamd_enable="NO" # Run bootparamd (or NO). +bootparamd_flags="" # Flags to bootparamd +pppoed_enable="NO" # Run the PPP over Ethernet daemon. +pppoed_provider="*" # Provider and ppp(8) config file entry. +pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). +pppoed_interface="fxp0" # The interface that pppoed runs on. +sshd_enable="NO" # Enable sshd +sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. +sshd_flags="" # Additional flags for sshd. +ftpd_enable="NO" # Enable stand-alone ftpd. +ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. +ftpd_flags="" # Additional flags to stand-alone ftpd. + +### Network daemon (NFS): All need rpcbind_enable="YES" ### +amd_enable="NO" # Run amd service with $amd_flags (or NO). +amd_program="/usr/sbin/amd" # path to amd, if you want a different one. +amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" +amd_map_program="NO" # Can be set to "ypcat -k amd.master" +autofs_enable="NO" # Run automountd(8) +nfs_client_enable="NO" # This host is an NFS client (or NO). +nfs_access_cache="60" # Client cache timeout in seconds +nfs_server_enable="NO" # This host is an NFS server (or NO). +oldnfs_server_enable="NO" # Run the old NFS server (YES/NO). +nfs_server_flags="-u -t" # Flags to nfsd (if enabled). +mountd_enable="NO" # Run mountd (or NO). +mountd_flags="-r" # Flags to mountd (if NFS server enabled). +weak_mountd_authentication="NO" # Allow non-root mount requests to be served. +nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). +nfs_bufpackets="" # bufspace (in packets) for client +rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. +rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). +rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. +rpc_statd_flags="" # Flags to rpc.statd (if enabled). +rpcbind_enable="NO" # Run the portmapper service (YES/NO). +rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. +rpcbind_flags="" # Flags to rpcbind (if enabled). +rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). +keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). +keyserv_flags="" # Flags to keyserv (if enabled). +nfsv4_server_enable="NO" # Enable support for NFSv4 +nfscbd_enable="NO" # NFSv4 client side callback daemon +nfscbd_flags="" # Flags for nfscbd +nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon +nfsuserd_flags="" # Flags for nfsuserd + +### Network Time Services options: ### +timed_enable="NO" # Run the time daemon (or NO). +timed_flags="" # Flags to timed (if enabled). +ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). +ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. +ntpdate_flags="-b" # Flags to ntpdate (if enabled). +ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file +ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. +ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). +ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. +ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file +ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high +ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" + # Flags to ntpd (if enabled). + +# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### +nis_client_enable="NO" # We're an NIS client (or NO). +nis_client_flags="" # Flags to ypbind (if enabled). +nis_ypset_enable="NO" # Run ypset at boot time (or NO). +nis_ypset_flags="" # Flags to ypset (if enabled). +nis_server_enable="NO" # We're an NIS server (or NO). +nis_server_flags="" # Flags to ypserv (if enabled). +nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). +nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). +nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). +nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). + +### SNMP daemon ### +# Be sure to understand the security implications of running SNMP v1/v2 +# in your network. +bsnmpd_enable="NO" # Run the SNMP daemon (or NO). +bsnmpd_flags="" # Flags for bsnmpd. + +### Network routing options: ### +defaultrouter="NO" # Set to default gateway (or NO). +static_arp_pairs="" # Set to static ARP list (or leave empty). +static_ndp_pairs="" # Set to static NDP list (or leave empty). +static_routes="" # Set to static route list (or leave empty). +natm_static_routes="" # Set to static route list for NATM (or leave empty). +gateway_enable="NO" # Set to YES if this host will be a gateway. +routed_enable="NO" # Set to YES to enable a routing daemon. +routed_program="/sbin/routed" # Name of routing daemon to use if enabled. +routed_flags="-q" # Flags for routing daemon. +mrouted_enable="NO" # Do IPv4 multicast routing. +mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast + # routing daemon. You need to + # install it from package or + # port. +mrouted_flags="" # Flags for multicast routing daemon. +arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. +forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") +accept_sourceroute="NO" # accept source routed packets to us + +### ATM interface options: ### +atm_enable="NO" # Configure ATM interfaces (or NO). +#atm_netif_hea0="atm 1" # Network interfaces for physical interface. +#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. +#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). +#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). +#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). +#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). +atm_pvcs="" # Set to PVC list (or leave empty). +atm_arps="" # Set to permanent ARP list (or leave empty). + +### Bluetooth ### +hcsecd_enable="NO" # Enable hcsecd(8) (or NO) +hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file + +sdpd_enable="NO" # Enable sdpd(8) (or NO) +sdpd_control="/var/run/sdp" # sdpd(8) control socket +sdpd_groupname="nobody" # set spdp(8) user/group to run as after +sdpd_username="nobody" # it initializes + +bthidd_enable="NO" # Enable bthidd(8) (or NO) +bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file +bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file + +rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) +rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf +# +#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' +rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' +#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register +#rfcomm_pppd_server_one_register_dun="NO" # for 'one' +# +#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' +rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' +#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register +#rfcomm_pppd_server_two_register_dun="NO" # for 'two' + +ubthidhci_enable="NO" # Switch an USB BT controller present on +#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. +#ubthidhci_addr="2" # Check usbconfig list to find the correct + # numbers for your system. + +### Network link/usability verification options +netwait_enable="NO" # Enable rc.d/netwait (or NO) +#netwait_ip="" # IP addresses to be pinged by netwait. +netwait_timeout="60" # Total number of seconds to perform pings. +#netwait_if="" # Interface name to watch link state on. +netwait_if_timeout="30" # Total number of seconds to monitor link state. + +### Miscellaneous network options: ### +icmp_bmcastecho="NO" # respond to broadcast ping packets + +### IPv6 options: ### +ipv6_network_interfaces="auto" # List of IPv6 network interfaces + # (or "auto" or "none"). +ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no + # corresponding $ifconfig_IF_ipv6 is + # marked as IFDISABLED for security + # reason. +ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). +#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) +ipv6_static_routes="" # Set to static route list (or leave empty). +#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 + # route toward loopback interface. +#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" +ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. +ipv6_cpe_wanif="NO" # Set to the upstram interface name if this + # node will work as a router to forward IPv6 + # packets not explicitly addressed to itself. +ipv6_privacy="NO" # Use privacy address on RA-receiving IFs + # (RFC 4941) + +route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. +route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. +route6d_flags="" # Flags to IPv6 routing daemon. +#route6d_flags="-l" # Example for route6d with only IPv6 site local + # addrs. +#route6d_flags="-q" # If you want to run a routing daemon on an end + # node, you should stop advertisement. +#ipv6_network_interfaces="ed0 ep0" # Examples for router + # or static configuration for end node. + # Choose correct prefix value. +#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. +#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. +ipv6_default_interface="NO" # Default output interface for scoped addrs. + # This works only with + # ipv6_gateway_enable="NO". +rtsol_flags="" # Flags to IPv6 router solicitation. +rtsold_enable="NO" # Set to YES to enable an IPv6 router + # solicitation daemon. +rtsold_flags="-a" # Flags to an IPv6 router solicitation + # daemon. +rtadvd_enable="NO" # Set to YES to enable an IPv6 router + # advertisement daemon. If set to YES, + # this router becomes a possible candidate + # IPv6 default router for local subnets. +rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. +mroute6d_enable="NO" # Do IPv6 multicast routing. +mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast + # routing daemon. You need to + # install it from package or + # port. +mroute6d_flags="" # Flags to IPv6 multicast routing daemon. +stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 + # tunneling interface. Specify this entry + # to enable 6to4 interface. +stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, + # to limit peer addr range. Effective value + # is 0-31. +stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. + # If you like, you can set "AUTO" for this. +stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 +ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr + # communication. (like ::ffff:a.b.c.d) +ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, + # see /usr/src/contrib/ipfilter/rules + # for examples +ip6addrctl_enable="YES" # Set to YES to enable default address selection +ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages +ip6addrctl_policy="AUTO" # A pre-defined address selection policy + # (ipv4_prefer, ipv6_prefer, or AUTO) + +############################################################## +### System console options ################################# +############################################################## + +keyboard="" # keyboard device to use (default /dev/kbd0). +keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). +keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). +keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. +keychange="NO" # function keys default values (or NO). +cursor="NO" # cursor type {normal|blink|destructive} (or NO). +scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). +font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). +font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). +font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). +blanktime="300" # blank time (in seconds) or "NO" to turn it off. +saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko +moused_nondefault_enable="YES" # Treat non-default mice as enabled unless + # specifically overriden in rc.conf(5). +moused_enable="NO" # Run the mouse daemon. +moused_type="auto" # See man page for rc.conf(5) for available settings. +moused_port="/dev/psm0" # Set to your mouse port. +moused_flags="" # Any additional flags to moused. +mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your + # language code table, specify alternative range + # start like mousechar_start=3, see vidcontrol(1) +allscreens_flags="" # Set this vidcontrol mode for all virtual screens +allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens + +############################################################## +### Mail Transfer Agent (MTA) options ###################### +############################################################## + +mta_start_script="/etc/rc.sendmail" + # Script to start your chosen MTA, called by /etc/rc. +# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: +sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). +sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file +sendmail_procname="/usr/sbin/sendmail" # sendmail process name +sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) +sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) +#sendmail_cert_cn="CN" # CN of the generate certificate +sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission +sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" + # Flags for localhost-only MTA +sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). +sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) +sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). +sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" + # Flags for sendmail_msp_queue daemon. +sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). + + +############################################################## +### Miscellaneous administrative options ################### +############################################################## + +auditd_enable="NO" # Run the audit daemon. +auditd_program="/usr/sbin/auditd" # Path to the audit daemon. +auditd_flags="" # Which options to pass to the audit daemon. +auditdistd_enable="NO" # Run the audit daemon. +auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. +auditdistd_flags="" # Which options to pass to the auditdistd daemon. +cron_enable="YES" # Run the periodic job daemon. +cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). +cron_dst="YES" # Handle DST transitions intelligently (YES/NO) +cron_flags="" # Which options to pass to the cron daemon. +lpd_enable="NO" # Run the line printer daemon. +lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. +lpd_flags="" # Flags to lpd (if enabled). +nscd_enable="NO" # Run the nsswitch caching daemon. +chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. +chkprintcap_flags="-d" # Create missing directories by default. +dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). +dumpdir="/var/crash" # Directory where crash dumps are to be stored +savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. + # By default, only the 10 most recent kernel dumps + # are saved. +crashinfo_enable="YES" # Automatically generate crash dump summary. +crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. +quota_enable="NO" # turn on quotas on startup (or NO). +check_quotas="YES" # Check quotas on startup (or NO). +quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) +quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown +quotacheck_flags="-a" # Check all file system quotas (if enabled) +accounting_enable="NO" # Turn on process accounting (or NO). +ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). +ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). +firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if + # this file exists. Should be on a R/W filesystem so + # the file can be deleted after the boot completes. + +# Emulation/compatibility services provided by /etc/rc.d/abi +sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). +linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). +svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). +clear_tmp_enable="NO" # Clear /tmp at startup. +clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp +ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks +ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" + # shared library search paths +ldconfig32_paths="/usr/lib32 /usr/lib32/compat" + # 32-bit compatibility shared library search paths +ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" + # a.out shared library search paths +ldconfig_local_dirs="/usr/local/libdata/ldconfig" + # Local directories with ldconfig configuration files. +ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" + # Local directories with 32-bit compatibility ldconfig + # configuration files. +kern_securelevel_enable="NO" # kernel security level (see security(7)) +kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure + # Note that setting securelevel to 0 will result + # in the system booting with securelevel set to 1, as + # init(8) will raise the level when rc(8) completes. +update_motd="YES" # update version info in /etc/motd (or NO) +entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. + # /var/db/entropy-file is preferred if / is not avail. +entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. +entropy_save_sz="4096" # Size of the entropy cache files. +entropy_save_num="8" # Number of entropy cache files to save. +harvest_interrupt="YES" # Entropy device harvests interrupt randomness +harvest_ethernet="YES" # Entropy device harvests ethernet randomness +harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness +harvest_swi="YES" # Entropy device harvests internal SWI randomness +dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot +watchdogd_enable="NO" # Start the software watchdog daemon +watchdogd_flags="" # Flags to watchdogd (if enabled) +devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing + # devfs(8) rules. +devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev +devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to + # apply (must be mounted already, i.e. fstab(5)) +devfs_load_rulesets="YES" # Enable to always load the default rulesets +performance_cx_lowest="Cmax" # Online CPU idle state +performance_cpu_freq="NONE" # Online CPU frequency +economy_cx_lowest="Cmax" # Offline CPU idle state +economy_cpu_freq="NONE" # Offline CPU frequency +virecover_enable="YES" # Perform housekeeping for the vi(1) editor +ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot +bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) + # ruleset file. +newsyslog_enable="YES" # Run newsyslog at startup. +newsyslog_flags="-CN" # Newsyslog flags to create marked files +mixer_enable="YES" # Run the sound mixer. +opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off +casperd_enable="YES" # casperd(8) daemon + +# rctl(8) requires kernel options RACCT and RCTL +rctl_enable="NO" # Load rctl(8) rules on boot +rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). + +############################################################## +### Jail Configuration (see rc.conf(5) manual page) ########## +############################################################## +jail_enable="NO" # Set to NO to disable starting of any jails +jail_parallel_start="NO" # Start jails in the background +jail_list="" # Space separated list of names of jails + +############################################################## +### Define source_rc_confs, the mechanism used by /etc/rc.* ## +### scripts to source rc_conf_files overrides safely. ## +############################################################## + +if [ -z "${source_rc_confs_defined}" ]; then + source_rc_confs_defined=yes + source_rc_confs() { + local i sourced_files + for i in ${rc_conf_files}; do + case ${sourced_files} in + *:$i:*) + ;; + *) + sourced_files="${sourced_files}:$i:" + if [ -r $i ]; then + . $i + fi + ;; + esac + done + } +fi Index: etc/devd.conf =================================================================== --- etc/devd.conf +++ etc/devd.conf @@ -318,4 +318,16 @@ action "/usr/local/etc/rc.d/postgresql restart"; }; +# Discard autofs caches, useful for the -media special map. The one +# second delay is for GEOM to finish tasting. +# +# XXX: We should probably have a devctl(4) event that fires after GEOM +# tasting. +# +notify 100 { + match "system" "DEVFS"; + match "cdev" "(da|mmcsd)[0-9]+"; + action "sleep 1 && /usr/sbin/automount -c"; +}; + */ Index: usr.sbin/autofs/auto_master.5 =================================================================== --- usr.sbin/autofs/auto_master.5 +++ usr.sbin/autofs/auto_master.5 @@ -27,7 +27,7 @@ .\" .\" $FreeBSD$ .\" -.Dd November 21, 2014 +.Dd November 22, 2014 .Dt AUTO_MASTER 5 .Os .Sh NAME @@ -213,14 +213,17 @@ .Pp .Bl -tag -width "-hosts" -compact .It Li -hosts -This map queries the remote NFS server and maps exported volumes. -It is traditionally mounted on -.Pa /net . -It enables access to files on a remote NFS server by accessing +Query the remote NFS server and map exported shares. +This map is traditionally mounted on +.Pa /net , +and enables access to files on a remote NFS server through .Pa /net/nfs-server-ip/share-name/ directory, without the need for any further configuration. +.It Li -media +Query devices that are not yet mounted, but contain valid filesystems. +Generally used to access files on removable media. .It Li -null -This map prevents the +Prevent .Xr automountd 8 from mounting anything on the mountpoint. .El