Index: head/sys/boot/fdt/dts/arm/orangepi-plus-2e.dts =================================================================== --- head/sys/boot/fdt/dts/arm/orangepi-plus-2e.dts (nonexistent) +++ head/sys/boot/fdt/dts/arm/orangepi-plus-2e.dts (revision 308902) @@ -0,0 +1,121 @@ +/*- + * Copyright (c) 2016 Jared McNeill + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include "sun8i-h3-orangepi-plus.dts" +#include "h3.dtsi" + +/ { + model = "Xunlong Orange Pi Plus 2E"; + compatible = "xunlong,orangepi-plus-2e", "allwinner,sun8i-h3"; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_phy_reset_pin>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&pio { + emac_phy_reset_pin: emac_phy_reset_pin@0 { + allwinner,pins = "PD6"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PA16"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_rgmii_a>; + phy-supply = <®_gmac_3v3>; + phy-mode = "rgmii"; + phy = <&phy1>; + + allwinner,leds-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ehci2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + vdd_cpu: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; + operating-points = < + /* kHz uV */ + 1296000 1340000 + 1200000 1320000 + 1008000 1200000 + 816000 1100000 + 648000 1040000 + >; +}; Property changes on: head/sys/boot/fdt/dts/arm/orangepi-plus-2e.dts ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property